纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	730 × 820 × 970 mm
Seat height from floor	450 mm
Seat cushion width	500 mm
Seat cushion depth	500 mm
Armrest height from floor	640 mm
Armrest outer width	660 mm
Backrest height	750 mm
Unfolded bed sleeping surface length	1900 mm
Unfolded bed sleeping surface width	600 mm
Fixed leg tube outer diameter	38 mm
Caster diameter	80 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net product weight	23 kg
Maximum static load capacity	200 kg
Cushion foam density	45 kg/m³
Upholstery abrasion resistance	100000 cycles
Caster dynamic load rating per wheel	50 kg
Recommended user weight limit	150 kg
Conversion cycle rating (chair to bed)	10000 cycles
Standard warranty period	36 months
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Main support frame	1.5 mm wall thickness cold-rolled steel tube, electrostatic powder coated light gray
Seat and back padding	80 mm thick high-density polyurethane sponge, flame-retardant grade
Seat and back upholstery	0.8 mm thick medical-grade blue PU faux leather, stain-resistant, easy to wipe clean
Armrests	Bent 38 mm diameter steel tube, matching light gray powder coated finish
Fixed support feet	Blue non-marking TPE rubber anti-slip end caps, scratch-resistant for hard floors
Convertible sliding casters	Black nylon universal casters, no brake, mounted on extendable nested frame
Sliding conversion mechanism	Galvanized steel slide rails, anti-corrosion treated for smooth pull-out operation
Hinge connection points	3 mm thick stamped steel hinge plates, zinc-plated for rust resistance
Seam stitching	Polyester bonded thread, 8 stitches per 30 mm seam pitch for upholstery durability
Inner bed support slats	1.2 mm thick cold-rolled steel slats with rounded edges to prevent upholstery damage
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Chair-to-bed conversion	Pull-out nested sliding frame extends forward, backrest folds flat to form a continuous single sleeping surface, no tools required
Armrest support function	Full-loop curved armrests provide stable upper body support when seated, no height or angle adjustment
Caster mobility for conversion	Four casters on extendable frame allow smooth sliding when converting, fixed rubber feet lock unit in place when set
Space-saving storage	Nested folded design reduces footprint to chair size when not in use as a bed, suitable for compact ward spaces
Fixed stable seating mode	Four rubber-tipped fixed legs contact the floor to prevent sliding during standard chair use, no rocking
Easy surface cleaning	Smooth non-porous PU upholstery allows disinfection with standard medical surface cleaners without material damage
No-tool assembly	Unit ships mostly pre-assembled, only requires caster and foot cap installation if delivered knocked down
Conversion lock mechanism	Spring-loaded steel detents lock frame in both chair and bed positions to prevent accidental collapse
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Hospital ward use	Suitable for patient family members to use as daytime seating and overnight sleeping in inpatient wards
Office nap use	Suitable for office break rooms to provide compact seating and temporary napping surface for staff
Clinic waiting area backup	Suitable for clinic waiting areas to provide extra temporary resting space during high patient volume
Temporary guest accommodation	Suitable for small apartments to provide compact extra guest seating and sleeping without dedicated guest room
Elderly care facility use	Suitable for nursing homes to provide caregiver rest seating and overnight rest near resident rooms
Emergency shelter deployment	Suitable for emergency shelter setups to provide dual-function seating and sleeping with minimal storage space
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

Hospital furniture seating safety	EN 16139:2013
Furniture castor performance	EN 12528:2000
Upholstered furniture resistance to ignition	EN 1021:2014

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

北美市场选型与验收参考	ANSI/BIFMA X5.4 公共及休闲座椅

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

Furniture mechanical safety standard	GB 28007
Metal furniture general technical requirement	GB/T 3324
Upholstered furniture flame retardancy	GB 20286
Furniture hardware durability test	GB/T 10357.3

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. Furniture mechanical safety standard：GB 28007；
2. Metal furniture general technical requirement：GB/T 3324；
3. Upholstered furniture flame retardancy：GB 20286；
4. Furniture hardware durability test：GB/T 10357.3；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · MED-ACB01-BL

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · MED-ACB01-BL

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · MED-ACB01-BL打开导出工具

页面快速操作

发布采购询价

产品描述

The Foldable Convertible Hospital Attendant Chair Bed, model MED-ACB01-BL, is a dual-function public furniture piece designed to transition seamlessly between upright seating and a flat sleeping surface without the use of tools. Its folded chair form presents a compact, structured silhouette with a consistent blue upholstered seat and back, paired with light gray metal armrests and frame components; when extended, the pull-out nested frame and folding backrest form a continuous single sleeping surface. The folded configuration occupies a small footprint to support space-saving storage when the bed function is not in use. Built for regular, repeated conversion and long-term use, the chair bed features a 1.5mm wall thickness cold-rolled steel tube main frame finished with electrostatic light gray powder coating, supported by zinc-plated stamped steel hinge plates and anti-corrosion treated galvanized steel slide rails for smooth pull-out operation. The seat and back are padded with flame-retardant high-density polyurethane sponge, upholstered in 0.8mm thick medical-grade blue PU faux leather that is stain-resistant and wipes clean easily. Fixed contact points use non-marking TPE rubber anti-slip end caps that resist scratching hard flooring, while black nylon universal casters mounted to the extendable frame enable smooth repositioning during conversion. Full-loop curved steel armrests match the frame finish to provide stable upper body support when seated, and heavy-duty polyester stitched seams reinforce upholstery durability. In fixed seating mode, four rubber-tipped feet rest flush against the floor to prevent sliding or rocking during regular use. For conversion, users pull the nested frame forward and fold the backrest flat to create a sleeping surface, with the casters facilitating smooth movement before the fixed feet lock the unit into place. The non-porous upholstery tolerates disinfection with standard medical surface cleaners without damage. This chair bed suits a broad range of commercial and residential settings: it serves as daytime seating and overnight rest space for patient escorts in hospital wards, offers temporary napping accommodations in office break rooms, provides backup resting space for high-volume clinic waiting areas, acts as flexible guest seating and sleeping in small apartments without dedicated guest rooms, supports caregiver rest in elderly care facilities, and delivers dual-function, low-storage space furnishing for emergency shelter deployments. Procurement teams should note the unit ships in two cartons per set, with a reference assembly time of 40 minutes per unit if delivered knocked down, requiring only caster and foot cap installation. The design supports heavy repeated use across high-traffic shared spaces, with consistent material specifications suited for environments requiring regular cleaning and reliable, space-efficient dual-function furnishing.

Foldable Convertible Hospital Attendant Chair Bed Specifications

供应商与现货