纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1800 × 700 × 780 mm
Seat height above floor	420 mm
Seat depth per position	480 mm
Seat width per seating position	560 mm
Backrest height above seat	360 mm
Armrest height above seat	200 mm
Coffee table lower shelf height above floor	150 mm
Table top glass thickness	10 mm
Steel frame tube diameter	32 mm
3-seater leg spread width	1650 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Total set weight	90 kg
3-seater unit static load capacity	450 kg
Recommended maximum occupancy	5 people
Frame surface abrasion resistance	50000 rub cycles
Expected service life under daily commercial use	5 years
Foot glide static floor load per leg	50 kg
Total assembled set net weight	90 kg
Maximum recommended occupancy	5 people
Frame chrome finish abrasion resistance	50000 rub cycles
Commercial service life under daily use	5 years

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Seat and backrest panels	Perforated steel mesh with chrome plating
Structural support frame	Chrome-plated cold-rolled steel tubing
Armrests	Curved chrome-plated steel
3-seater connecting crossbeam	Black powder-coated steel panel
Single chair under-seat support panel	Black powder-coated steel panel
Coffee table top and lower shelf	Clear tempered glass
Table frame and legs	Curved chrome-plated steel tubing
Floor contact glides	Chrome-plated steel with non-slip rubber pad
Assembly fasteners	Zinc-plated steel bolts and nuts
3-seater under-seat cross support	Black powder-coated cold-rolled steel panel, bolted between frame legs to eliminate seat flex
Single chair under-seat support	Black powder-coated cold-rolled steel panel, welded to chair leg assembly for seat base reinforcement
Coffee table frame and legs	Curved chrome-plated cold-rolled steel tubing, welded joints support both glass shelves with splayed leg bases

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Seating layout configuration	Symmetric arrangement: 1 single chair left, 3-seat center bench, 1 single chair right, coffee table centered in front
Mesh panel ventilation	Perforated seat and back mesh allows continuous air flow to prevent heat buildup during extended waiting periods
Floor leveling adjustment	Threaded glide feet at each leg end adjust up to 15mm to compensate for uneven hard floors
Armrest support function	Curved fixed armrests provide stable support for standing assistance and arm rest during seated use
Table storage function	Two-tier glass table provides upper surface for refreshments and reading materials, lower shelf for magazine or brochure storage
Structural anti-tip design	Four-point splayed leg base on all seating units and table creates wide stability footprint to prevent tipping under offset user weight
Surface cleaning compatibility	Smooth chrome and glass surfaces can be wiped with standard commercial cleaning solutions without staining or finish damage
Knockdown shipping design	Components ship disassembled to reduce freight volume, all required fasteners included for on-site assembly
Recline Angle / Lock Reference	125° with 3 suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Number of shipping cartons	5 cartons
Largest carton dimensions	1850 x 750 x 200 mm
Total shipping gross weight	105 kg
Total shipping volume	0.82 CBM
Required on-site assembly time	60 minutes
20ft GP container loading quantity	36 sets
40ft HQ container loading quantity	88 sets
Inner packaging material	Polyfoam wrapping + corner protectors for glass components, PE film for metal frames
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Office reception areas	Suitable for corporate lobby waiting zones, providing structured seating for 5 visitors with central table for document and refreshment placement
Medical clinic waiting rooms	Ventilated mesh construction and easy-to-clean metal/glass surfaces meet hygiene requirements for high-turnover healthcare waiting areas
Bank and public service hall waiting zones	Durable metal frame construction withstands high daily use traffic in public service locations, with stable seating for extended waiting periods
Small business meeting break areas	Compact set size fits small office break spaces, providing informal seating for short team discussions and visitor meetings
Transportation terminal waiting annexes	Anti-tip splayed leg design and durable finish withstand heavy use in train station, airport or bus terminal sub-waiting areas
Corporate office reception lobbies	Suitable for main entrance waiting zones, providing structured 5-person seating with central table for document and refreshment placement, matching formal professional interior design requirements
Small business break and meeting areas	Compact set footprint fits 15 sqm small office spaces, providing informal seating for short team discussions and visitor meetings with open sightlines from the low-profile glass table
Transportation terminal sub-waiting areas	Anti-tip splayed leg design and scratch-resistant chrome finish withstand heavy unattended use in train station, airport or bus terminal annex waiting zones, with fixed construction reducing theft risk

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

Office and public seating safety recommendation	EN 16139:2013
Furniture glass safety recommendation	EN 12150:2015
Metal surface finish recommendation	EN 12543:1998
Non-domestic seating safety recommendation	EN 16139:2013
Furniture toughened glass safety recommendation	EN 12150:2015
Metal chrome finish recommendation	EN 12543:1998

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

北美市场选型与验收参考	ANSI/BIFMA X5.4 公共及休闲座椅

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

Metal furniture structural safety recommendation	GB/T 3324
Tempered glass furniture safety recommendation	GB 15763.2
Public seating durability recommendation	GB/T 35607

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. Metal furniture structural safety recommendation：GB/T 3324；
2. Tempered glass furniture safety recommendation：GB 15763.2；
3. Public seating durability recommendation：GB/T 35607；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · RCP-SET-5P-001

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · RCP-SET-5P-001

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · RCP-SET-5P-001打开导出工具

页面快速操作

发布采购询价

产品描述

The KERTE RCP-SET-5P-001 5-Piece Mesh Metal Reception Seating Set with Glass Coffee Table is a coordinated public waiting solution built for consistent, high-traffic use. The set follows a symmetric, formal layout: a central three-seater bench is flanked by one single visitor chair on each side, with a two-tier glass coffee table positioned directly in front of the seating group to support face-to-face interaction. All seating pieces share a uniform polished chrome finish, with curved integrated armrests and splayed, four-point leg bases that create a wide, stable footprint. Perforated chrome-plated steel mesh forms the seat and back panels, paired with padded seat and back cushions and a contoured lumbar support zone for upright sitting posture. The coffee table features clear tempered glass for its top surface and lower shelf, framed by curved chrome-plated steel tubing that matches the seating finish. Black powder-coated steel support panels reinforce the underside of each seating unit to eliminate structural flex, while threaded adjustable glides at every leg end compensate for uneven hard flooring, with non-slip rubber pads to prevent floor indentation. The set ships in knockdown packaging to reduce freight volume, with included zinc-plated steel fasteners for on-site assembly. The perforated mesh panels support continuous r flow to prevent heat buildup during short-term waiting stays, and the smooth, non-porous chrome and glass surfaces wipe clean with standard commercial cleaning solutions without finish damage. The two-tier coffee table offers an upper surface for refreshments and reading materials, plus a lower shelf for brochure and magazine storage, with open clearance beneath the lower shelf to support unobstructed floor cleaning. Fixed armrests provide stable support for users when standing from a seated position, and the anti-tip leg geometry resists tipping under offset weight loads. Each seating position supports a distributed static load suited for diverse adult users, and the chrome frame finish resists abrasion from regular high-traffic contact to mntn its appearance over time. This set is well suited for corporate office reception lobbies, medical clinic waiting rooms, bank and public service hall waiting zones, small business break and meeting areas, and transportation terminal sub-waiting spaces. Its compact, structured footprint fits smaller reception footprints while mntning open sightlines, and its fixed, non-mobile construction reduces risk of misplacement or theft in unattended public areas. For procurement teams, note that core material specifications including steel gauge, plating grade, glass impact ratings, and hardware performance grades require confirmation via supplier bill of materials prior to final order placement. The set’s flat-packed design supports efficient bulk shipping for large facility rollouts, with assembly achievable by two workers using standard hand tools. Routine maintenance supports a reliable commercial service life for dly high-traffic use.

5-Piece Mesh Metal Reception Seating Set with Glass Coffee Table Specifications

供应商与现货