纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	680 × 680 × 1280 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Recommended user weight capacity	150 kg
Chair net weight	16 kg
Seat foam density	45 kg/m3
Seat foam thickness	80 mm
Back mesh load rating	150 kg
Base static-load reference	1000 kg
Gas-lift cycle-life target	100000 height-adjustment cycles
Caster rolling durability target	100000 cycles
Recommended daily use duration	8 hours
Color options	1 visible black colorway

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Backrest mesh	Black flexible polyester mesh set within a molded polymer frame
Back frame	Black molded polymer outer frame with structural side supports
Seat cushion	80 mm molded polyurethane foam covered in black woven fabric
Seat support shell	Molded polymer seat pan with a steel mounting plate interface
Headrest	Black fabric-covered foam pad on a polymer and steel support bracket
Armrest pads	Black molded polymer pads with softly rounded contact surfaces
Armrest supports	Flip-up polymer arm supports with circular side pivot housings
Gas lift	Black-painted steel telescopic cylinder with polymer dust cover
Mechanism	Black steel tilt mechanism with polymer control lever and tension knob
Five-star base	Black molded nylon or glass-filled nylon five-star base
Casters	Black twin-wheel nylon casters with steel wheel axles
Internal back support	Elastic polymer lumbar band integrated behind the lower mesh zone

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Swivel function	360-degree seat rotation around the central gas-lift axis
Seat height adjustment	Pneumatic lift with 100 mm travel controlled by the right-side lever
Tilt action	Synchronized seat-and-back recline through a 15-degree rearward tilt angle
Tilt tension control	Rear-mounted rotary knob adjusts recline resistance for users up to 150 kg
Tilt lock	Multi-position lock mechanism secures the back at upright and reclined working positions
Flip-up armrests	Rear-pivoting arm pads rotate upward to allow sit-stand or side entry
Head support	Padded headrest attached above the backrest for upper-neck support
Lumbar support	Flexible lower mesh zone provides passive lumbar contouring
Mobility	Five twin-wheel casters enable rolling on hard floors and low-pile carpet
Seat-depth adjustability	Fixed seat depth of 480 mm with no visible sliding seat mechanism
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Private office workstation	Suited to executive or manager desks needing 8-hour seated support and mobility
Open-plan office	Suitable for assigned workstations where quiet black task seating is required
Home office	Appropriate for users combining computer work, calls and document tasks at a desk
Meeting or supervision room	Usable in long-duration meeting rooms and supervisor stations
Hot-desk environment	Suitable for shared desks when paired with height-adjustable work surfaces
Computer and coding workstation	Recommended for keyboard-and-monitor tasks requiring upright back support
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

Office chair safety standard	EN 1335applies to dimensional and safety requirements for office work chairs
Office chair mechanical testing	EN 1335applies to structural safety and strength test requirements
Office chair stability testing	EN 1022 applies to determination of chair stability
Upholstered furniture components	EN 1021applies to cigarette-ignition resistance when upholstered fabrics are supplied

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

Office chair safety and durability	ANSI/BIFMA X5.1 applies to general-purpose office chair safety and durability tests
Base and caster verification	ANSI/BIFMA X5.1 base, caster and mobility tests apply to the five-star base and twin-wheel casters
Static and cyclic load verification	ANSI/BIFMA X5.1 seat, back and arm load tests apply to visible load-bearing components

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

Office chair safety applicability	GB/T 28004.1:2022 applies to office chairs for general seated work use
Furniture structural testing applicability	GB/T 10357.3 applies to back-rest and seat strength/durability test methods
Formaldehyde and textile controls	GB 18587 applies when supplier declares textile or foam emissions performance

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. Office chair safety applicability：GB/T 28004.1:2022 applies to office chairs for general seated work use；
2. Furniture structural testing applicability：GB/T 10357.3 applies to back-rest and seat strength/durability test methods；
3. Formaldehyde and textile controls：GB 18587 applies when supplier declares textile or foam emissions performance；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · OC-HB-MESH-01

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · OC-HB-MESH-01

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · OC-HB-MESH-01打开导出工具

页面快速操作

发布采购询价

产品描述

The Black High-Back Mesh Ergonomic Office Chair, model OC-HB-MESH-01, is an unbranded task chair designed for focused desk work in commercial and residential settings. Its tall profile combines a black flexible mesh backrest, a padded fabric headrest, and a contoured fabric-covered foam seat, giving the chair a structured yet understated appearance suited to neutral office interiors. The black molded polymer frame and structural side supports define the backrest, while the nylon armrests, five-star base, twin-wheel casters, and black-painted gas-lift assembly maintain a consistent professional finish. The seat uses molded polyurethane foam covered in black woven fabric, supported by a molded polymer seat pan with a steel mounting plate interface. The backrest mesh is set within the polymer outer frame to create a breathable support surface, and a padded headrest mounted on a polymer and steel bracket provides upper-neck support. Armrest pads have softly rounded contact surfaces, and the rear-pivoting flip-up supports rotate upward to make side entry or sit-stand use easier. Functionally, the chair provides 360-degree swivel movement and pneumatic seat-height adjustment controlled by a right-side lever. Its synchronized tilt action moves the seat and back through a rearward recline, while the rear-mounted tension knob allows resistance to be adjusted for users up to 150 kg. A multi-position tilt lock secures the chair in upright and reclined working positions. The steel tilt mechanism, gas lift, and five-star caster base support mobility and regular height changes across individual workstations. This high-back chair is appropriate for private offices, executive or manager desks, open-plan assigned workstations, home offices, meeting rooms, supervisor stations, hot-desks paired with height-adjustable surfaces, and computer or coding workstations. Its quiet black appearance coordinates with standard desk furniture, while the headrest and lumbar-oriented back structure target users who spend long periods on keyboard, monitor, call, and document tasks. Procurement teams should plan for delivery as one set packed in two cartons, with assembly planned around the stated per-set reference time. The chair’s listed weight capacity, component materials, flip-up armrest action, tilt functions, and caster base should be checked against intended user needs and workspace layout before bulk purchase. Spare parts availability, replacement under local purchasing terms, and delivery handling should also be confirmed, particularly for multi-seat office rollouts.

Black High-Back Mesh Ergonomic Office Chair Specifications

供应商与现货