纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	620 × 600 × 1010 mm
Seat width	500 mm
Seat depth	480 mm
Seat height range	500 mm
Backrest width	480 mm
Backrest height	460 mm
Armrest height above seat	210 mm
Armrest width	60 mm
5-star base diameter	600 mm
Caster diameter	50 mm
Gas lift outer tube diameter	50 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Recommended maximum user weight	120 kg
Chair net weight range	12 kg
Seat foam density	30 kg/m³
Back mesh abrasion resistance reference	30000 cycles
Caster rolling durability reference	100000 cycles
Gas lift cycle reference	100000 cycles
Recommended maximum user static load	120 kg
Back mesh Martindale abrasion resistance	30000 cycles
Gas lift cycle rating	100000 cycles
Seam tensile strength	200 N

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Backrest frame	Black hard plastic injection-molded frame supporting the mesh panel
Backrest support surface	Tensioned woven black mesh with breathable grid structure
Seat cushion	Foam-padded seat upholstered in solid black fabric
Armrests	Fixed one-piece black hard plastic armrests with open rectangular side profile
Gas lift column	Steel gas lift cylinder with black outer casing and chrome-plated inner rod section
Tilt mechanism internal plate	2.5 mm thick cold-rolled steel plate forming the core of the tilt mechanism
5-star base	Black 5-point base with metal inner structure and matte black outer finish
Casters	Twin-wheel black casters with light-colored tread ring, 5 pieces total
Seat inner frame	Plywood or steel inner support frame inside seat cushion
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Five-star Base Material Thickness	Metal base wall 3.5 mm; diameter 700 mm

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Seat height adjustment	Pneumatic height adjustment via right-side lever, with 80 mm total vertical stroke range and 500 mm maximum seat height
Swivel function	360-degree continuous rotation around central gas lift axis, supported by 5-point caster base
Seat tilt function	Synchro or knee-tilt recline mechanism with lever-activated lock, limited to 12 degrees of backward tilt from upright
Fixed armrest support	Rigidly mounted plastic armrests on both sides, non-adjustable in height, width or depth
Mobility	5 twin-wheel casters for rolling on hard and low-pile carpet floors, paired with 600 mm diameter 5-star base for stability
Breathable back support	Tensioned mesh back panel provides passive ventilation and flexing lumbar support without active lumbar adjustment
Weight-activated tilt tension	Self-adjusting or manually set tilt resistance proportional to user weight, controlled through internal mechanism spring
Full swivel function	360-degree continuous smooth rotation around central gas lift axis, supported by 5-point caster base
Seat tilt recline	Knee-tilt recline mechanism with lever-activated locking, providing 12 degrees of backward tilt from the upright position
Fixed armrest load bearing	Rigidly mounted plastic armrests on both sides, supporting 80 kg vertical static load per arm with no height, width or depth adjustment
Rolling mobility	5 twin-wheel 50 mm diameter casters for rolling on hard flooring and low-pile carpet, paired with 600 mm diameter 5-star base for anti-tip stability
Tilt tension adjustment	Manual tilt resistance adjustment via under-seat rotary knob, matching user weight range up to 120 kg

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Packing units per carton	1 unit per carton
Carton dimensions	650 x 520 x 350 mm
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

General office workstations	Suitable for open-plan and individual office workstations with standard 760 mm height desks, supporting daily 8-hour seated computer work
Staff and administrative use	Targeted at daily staff, administrative and clerical users up to 120 kg body weight seeking basic ergonomic support and breathability
Meeting and training rooms	Appropriate for meeting rooms and training areas requiring stackable or mobile seating with uniform black appearance and easy maneuverability
Home office use	Suitable for home office setups with standard desk heights, offering compact footprint and tool-light assembly for end users
Co-working and shared spaces	Ideal for co-working environments where durable, easy-to-clean and visually consistent seating is required across multiple desks
Temporary workstations	Suitable for temporary project workstations and hot-desking areas with high user turnover, requiring low maintenance and quick height adjustment
Small and medium enterprise offices	Recommended for SME office bulk procurement with balanced cost performance and basic ergonomic compliance
Recommended Matching Desk Size	2.4 m executive desk

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 1335-1:2020	Applicable European office chair standard Part 1 for dimensions, safety and strength requirements, suitable for commercial office use specification
EN 1022:2018	Applicable standard for office chair stability testing, used for tilt and base stability acceptance checks

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.1-2021	Recommended references: BIFMA compliance
BIFMA X5.5-2014	Applicable standard for office task chair armrest strength and durability evaluation, for acceptance testing planning

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 38608-2020	Applicable standards and test results require confirmation
GB/T 10357.2-2013	Applicable for seat and back static load testing per furniture mechanics test standard Part 2, for office chair load verification
GB/T 10357.3-2013	Applicable for office chair armrest and base strength testing per furniture mechanics test standard Part 3

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 38608-2020：Applicable standards and test results require confirmation；
2. GB/T 10357.2-2013：Applicable for seat and back static load testing per furniture mechanics test standard Part 2, for office chair load verification；
3. GB/T 10357.3-2013：Applicable for office chair armrest and base strength testing per furniture mechanics test standard Part 3；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · OC-MESH-BK-001

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · OC-MESH-BK-001

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · OC-MESH-BK-001打开导出工具

页面快速操作

发布采购询价

产品描述

The Black Mesh Back Task Office Chair with Fixed Arms (model OC-MESH-BK-001) is an unbranded entry-level office task chair designed for balanced functionality and understated visual appeal. It features a uniform black aesthetic across its entire structure, with a mid-back mesh panel set within a hard plastic frame, a fabric-upholstered padded seat, fixed one-piece plastic armrests with an open rectangular side profile, and a 5-point base fitted with twin-wheel casters. Its streamlined form fits seamlessly into spaces requiring consistent, unobtrusive seating arrangements. Construction of the chair combines durable, practical materials tailored to regular office use. The backrest uses a tensioned woven black mesh with a breathable grid structure, supported by an injection-molded black hard plastic frame and an internal reinforced bent plywood or composite frame. The seat holds a foam-padded core wrapped in solid black fabric, with an internal plywood or steel support frame for structural stability. Fixed hard plastic armrests mount rigidly to the seat frame, while a steel gas lift cylinder with a black outer casing connects the seat assembly to the 5-star base, which has a metal inner structure and matte black outer finish. Five twin-wheel casters complete the mobility system, with steel and cold-rolled steel forming the core of the tilt mechanism. The chair delivers core task seating functions for daily use. Pneumatic seat height adjustment is controlled via a right-side lever, with a maximum seat height of 500 mm above the floor. It offers 360-degree continuous swivel rotation and a knee-tilt recline mechanism with lever-activated lock, supporting 12 degrees of backward tilt from the upright position. The fixed armrests provide rigid vertical support, while the tensioned mesh back delivers passive ventilation and flexing lumbar support without active lumbar adjustment. Five twin-wheel casters enable smooth rolling on hard flooring and low-pile carpet, paired with the wide 5-star base for steady anti-tip performance. This chair is suited for a wide range of commercial and residential settings. It works well in general office workstations, including open-plan layouts and individual offices with standard 760 mm height desks, supporting 8-hour daily seated computer work for staff, administrative, and clerical users. It is appropriate for meeting rooms, training areas, co-working spaces, temporary project workstations, and hot-desking environments, where its uniform appearance, easy maneuverability, and low maintenance requirements support flexible, high-usage operations. For residential use, it fits standard home office desk setups, with a compact footprint and straightforward assembly accessible to end users. It is also well-suited for bulk procurement by small and medium enterprises seeking unified office furniture with balanced cost performance. For procurement planning, the chair supports a maximum user weight of 120 kg, with a net weight of 12 kg for freight calculation purposes. It ships in a knock-down configuration, with one unit per primary carton for standard flat packing. Assembly time aligns with typical task chair self-installation timelines for end users. When evaluating supplier quotes, buyers should confirm exact material specifications, component grade details, and certified performance ratings to align with specific project durability and compliance requirements.

Black Mesh Back Task Office Chair with Fixed Arms Specifications

供应商与现货