纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	660 × 680 × 1280 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Recommended user weight capacity	150 kg
Net weight	18 kg
Seat foam density	45 kg/m3
Back mesh static load	150 kg
Gas-lift vertical performance	100,000 height-adjustment cycles
Seat sliding endurance	100,000 cycles
Caster rolling durability	100,000 cycles
Recommended user height range	190 cm; published value 190 cm
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Backrest suspension	Teal flexible woven mesh over a contoured black support frame
Headrest cover	Teal woven mesh or mesh-look fabric over padded core
Seat upholstery	Teal woven fabric with visible perimeter seam over foam cushion
Seat cushion	Molded polyurethane foam, target thickness 80 mm and density 45 kg/m3
Internal seat shell	12 mm glass-fiber-reinforced polypropylene seat plate
Back frame	Black molded polypropylene or nylon frame with flexible central mesh zone
Armrest supports	Black rigid nylon or polypropylene T-shaped supports with fixed vertical posts
Arm pads	Black polyurethane or polymer contact pads with molded flat top
Gas-lift assembly	Black powder-coated steel telescopic tube with 50 mm outer diameter
Five-star base	Black reinforced nylon or powder-coated metal five-spoke base
Casters	Black hard-wearing polyurethane twin-wheel casters with swivel stems
Under-seat mechanism	Black steel tilt and height-control plate with actuation levers

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Seat height adjustment	Pneumatic gas lift provides 80 mm vertical travel, 540 mm seat height
Swivel function	360-degree rotational seat and back on central gas-lift bearing
Back recline	Synchronized tilt movement with 125degree back angle; published value 125 degrees
Tilt tension	Under-seat tension knob adjusts resistance over 3 complete turns
Tilt lock	Three-position lock at 105, 115, and 125 degrees
Head support	Padded curved headrest supports rear head and neck in upright or reclined posture
Lumbar support	Raised lower padded back zone provides passive lumbar contact
Arm support	Fixed-height T-armrests provide forearm support during keyboard tasks
Mobility	Five dual-wheel casters enable rolling on hard floors and low-pile carpet
Seat movement	Recommended 60 mm seat-depth slide for thigh-depth adjustment
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Private office workstation	Fits executive or staff desks where long-duration seated support and headrest comfort are required
Home office	Suitable for a dedicated study or home workstation with standard 760 mm desk height
Open-plan workspace	Suited to task seating in shared offices where quiet rolling and 360-degree access are useful
Meeting and computer work	Appropriate for keyboard, video conference, reading, and screen-based tasks
Facility procurement package	Suitable for standardized bulk seating with fabric, mechanism, and load-test acceptance criteria
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 1335-1 applicability	Use for office-chair dimensional safety and ergonomic geometry evaluation
EN 1335-2 applicability	Applicable standards and test results require confirmation
EN 1335-3 applicability	Use for office-chair structural and safety test methods
EN 1022 applicability	Use for seating stability assessment on castor-based office chairs

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.1 applicability	Use for office-chair safety, strength, stability, and durability acceptance
Back-rest test target	Validate backrest to ANSI/BIFMA X5.1 cyclic and static load procedures
Base and caster test target	Validate base, caster retention, and rolling wear under ANSI/BIFMA X5.1

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 10357.3 applicability	Use for seat and back strength and durability test scope on office chairs
GB/T 10357.2 applicability	Use for caster and chair-base mobility/durability assessment where applicable
GB 18584 applicability	Use for indoor furniture formaldehyde and harmful-substance release limits

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 10357.3 applicability：Use for seat and back strength and durability test scope on office chairs；
2. GB/T 10357.2 applicability：Use for caster and chair-base mobility/durability assessment where applicable；
3. GB 18584 applicability：Use for indoor furniture formaldehyde and harmful-substance release limits；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · OC-MESH-TEAL-HR-5P

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · OC-MESH-TEAL-HR-5P

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · OC-MESH-TEAL-HR-5P打开导出工具

页面快速操作

发布采购询价

产品描述

The Teal Ergonomic Mesh Executive Task Chair with Headrest is a high-back office task chair designed for long-duration desk work. Its teal mesh back and matching headrest create a distinct contemporary appearance, while the black frame, armrests, base, and gas lift provide a structured commercial contrast. The chair has a contoured back frame with a flexible central mesh zone and a raised lower padded section for passive lumbar contact. The padded, curved headrest supports the rear head and neck in both upright and reclined seating positions. Its overall form includes a fabric-upholstered seat, fixed T-shaped arm supports, and a mobile five-star base suited to executive, staff, and home office settings. Construction combines upholstered comfort with durable structural components. The backrest uses teal flexible woven mesh over a molded black polypropylene or nylon support frame. The headrest is finished in teal woven mesh or mesh-look fabric over a padded core. The seat features teal woven fabric with a visible perimeter seam over molded polyurethane foam, supported by a glass-fiber-reinforced polypropylene seat plate. Black polymer or nylon armrests include polyurethane or polymer contact pads with molded flat tops. The black powder-coated steel telescopic gas lift and polyurethane casters complete the mobile central base. The chair has a stated recommended user weight capacity of 150 kg and a net weight of 18 kg. Functionality is centered on adjustability and movement. Pneumatic seat-height adjustment provides 80 mm of vertical travel and reaches a seat height of 540 mm. The seat and back rotate 360 degrees on the central gas-lift bearing. The synchronized recline mechanism offers a 125-degree back angle and a three-position tilt lock at 105, 115, and 125 degrees. An under-seat tension knob adjusts recline resistance over three complete turns, helping users tailor support to different working postures. These features make the chair appropriate for keyboard work, video conferences, reading, screen-based tasks, and general computer use.

Teal Ergonomic Mesh Executive Task Chair with Headrest Specifications

供应商与现货