纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	610 × 620 × 1010 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net weight	11.5 kg
Recommended user weight capacity	160 kg
Recommended occupant height range	190 cm
Seat foam density	35 kg/m3
Seat foam compression set	8 percent maximum
Back mesh tensile capacity	120 kg
Frame static vertical load	450 kg
Frame cyclic durability	120,000 cycles
Seat surface contact width	470 mm
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Backrest outer panel	Black woven mesh over a molded polymer frame with a large central ventilation insert
Lumbar support band	Solid black woven lower back panel providing continuous lumbar contact
Seat upholstery	Black woven polyester fabric over a contoured padded cushion
Seat cushion	70 mm polyurethane foam with a rounded waterfall front edge
Internal seat support	12 mm molded plywood or composite seat board anchored to the steel frame
Back frame	Black rigid polymer perimeter frame with a visible side hinge or recline-pivot cover
Armrests	Black molded fixed polymer arm pads and curved supports attached to the back/seat structure
Cantilever frame	25 mm round powder-coated steel tube formed into a continuous sled base
Floor glides	Injected polymer glide pads at four rail ends to protect hard floors
Frame finish	Black powder coating or coated tubular finish with welded/bent continuous runners
Hardware	Steel connecting bolts and hidden pivot brackets under the seat and arm supports
Fabric surface mass	320 g/m2

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Fixed cantilever seating	Continuous sled legs provide controlled flex without casters or height adjustment
Back recline movement	8 degree maximum flexible back tilt through the side pivot connection
Back tilt lock	No position lock; the back returns through frame and pivot resistance
Arm support	Fixed curved armrests provide forearm support at 680 mm above floor
Seated entry	Open front sled frame permits approach from either side with 500 mm base width
Floor protection	Four polymer glide pads distribute load and reduce scratching on hard floors
Stacking	Non-stacking single-chair construction with a full-width rigid sled base
Ventilation	Open mesh insert covers 55 percent of the backrest area
Lumbar contact	Solid lower band contacts the lumbar region while the upper mesh allows airflow
Swivel	No swivel function; seat and back remain fixed to the stationary sled frame
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Conference room	Fixed armless-swivel geometry aligns occupants at tables while preserving a uniform executive appearance
Visitor seating	The 450 mm seat height and fixed arms support short-to-medium meetings across reception desks
Training room	Cantilever glides reduce rolling distractions and protect hard training-room floors
Open office touchdown	Black neutral finish and breathable back fit temporary work or guest seating beside desks
Reception lounge	Pairs with side tables or reception counters where mobility is not required
Hard-floor installation	Polymer end glides suit tile, wood, laminate, and vinyl floors without adding chair mats
Standard adult users	450 mm seat height and 500 mm seat width accommodate most adult office users
Recommended Matching Desk Size	2.4 m executive desk

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

该市场暂无标准数据。

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

North America procurement and testing reference	Recommended references: ANSI/BIFMA X5.1

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

该市场暂无标准数据。

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. 技术标准与检测报告由供应商在投标或采购确认阶段提供；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · CF-MESH-SLED-01

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · CF-MESH-SLED-01

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · CF-MESH-SLED-01打开导出工具

页面快速操作

发布采购询价

产品描述

The Black Mesh Cantilever Conference Chair with Fixed Arms is an unbranded visitor and meeting chair built for settings that call for a tidy, consistent seating profile. Its upright mesh back, contoured fabric seat, fixed armrests, and continuous sled base create a streamlined executive appearance suitable for conference tables, reception areas, and flexible workplace seating. Visually, the chair combines a black woven mesh back with a black rigid polymer perimeter frame and a large central ventilation insert. A solid woven lower-back panel forms a continuous lumbar support zone, while the visible side pivot covers give the backrest a structured, mechanical detail. The black woven polyester seat is paired with molded fixed polymer arm pads and curved supports, all supported by a powder-coated steel cantilever frame finished in black. The open sled base keeps the silhouette light and makes side approach straightforward. Construction centers on a 25 mm round steel tube formed into a full-width sled frame. The seat uses a contoured cushion with polyurethane foam, a rounded waterfall front edge, and a molded plywood or composite internal board anchored to the frame. The backrest places woven mesh over a molded polymer frame, and the fixed armrests attach to the back and seat structure. Injected polymer glides are fitted at all four rail ends to help protect tile, wood, laminate, and vinyl floors. The chair provides controlled flex through its cantilever base rather than casters or height adjustment. It also allows an 8 degree maximum flexible back tilt through the side pivot connection; there is no tilt lock, and the back returns through frame and pivot resistance. Fixed curved armrests offer steady forearm support, while the open front frame permits seated entry from either side. The chair is non-stacking and intended for single-chair placement. This model is well suited to conference rooms, visitor seating near reception desks, training rooms, open-office touchdown points, and reception lounges used with side tables or counters. Its neutral black finish and breathable back make it appropriate for short-to-medium meetings and temporary work or guest use. The glided, non-rolling design is particularly useful on hard floors where chair movement should remain quiet and controlled. For procurement, buyers should note the fixed geometry, non-stacking build, and lack of casters or seat-height adjustment before specifying. Delivery is packed as one set in two cartons, with reference assembly time of 40 minutes per set. The listed weight capacity, net weight, overall dimensions, arm clearance, seat height, and packaged weight should be reviewed against table heights, storage space, delivery access, and installation planning.

Black Mesh Cantilever Conference Chair with Fixed Arms Specifications

供应商与现货