纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	620 × 650 × 1010 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net weight	13 kg
Recommended user weight	160 kg
Single-seat occupancy	1 person
Static seat proof load target	1100 N
Backrest proof load target	670 N
Sled-frame cyclic durability target	120000 cycles
Fabric abrasion acceptance target	50000 Martindale cycles
Seat foam density	45 kg/m3
Seat foam rebound	35%
Warranty period	5 years

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Backrest suspension	Gray woven polymer mesh stretched within a framed back support
Back frame	Black rigid polymer outer frame with softly rounded perimeter
Lumbar zone	Contoured central mesh support integrated into the backrest
Seat upholstery	Blue woven fabric over padded cushion
Seat cushion	70 mm molded polyurethane foam with fabric cover
Seat support shell	Rigid polymer load-bearing seat pan under the cushion
Arm pads	Black molded polymer fixed arm pads with rounded rectangular tops
Arm supports	Black coated steel tubular supports continuous with the sled frame
Cantilever base	Black powder-coated bent steel tube sled frame
Floor glides	Four black polymer non-swivel glide caps at floor-contact ends
Seat-to-frame hardware	Black steel mounting plates and fasteners below the seat
Visible finish	Matte black frame with blue seat and graphite-gray mesh

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Base mobility	Fixed cantilever sled base with four glides and no casters
Swivel function	No swivel function; seat and back remain fixed to the sled frame
Height adjustment	No gas lift or seat-height control; fixed seat height of 460 mm
Back support	Integrated contoured lumbar zone provides fixed lower-back support
Recline mechanism	Fixed upright back with no visible tilt lock or recline actuator
Arm support	Fixed loop-form armrests support forearms at 230 mm above the seat
Floor protection	Four polymer glides distribute the sled load and reduce direct metal contact
Stacking configuration	Non-stacking individual chair based on the continuous high back and arm profile
Seat retention	Cushion remains fixed to the support shell and steel mount rather than tipping
Color configuration	2 visible primary upholstery colors: graphite-gray mesh and blue seat fabric
Seam construction target	7 stitches per 50 mm along visible cushion seams
Recline Angle / Lock Reference	125° with 3suggested lock positions

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Carton dimensions	680 x 560 x 610 mm
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Conference room	Use around meeting tables where a fixed upright posture and quiet non-rolling base are preferred
Visitor seating	Place in reception or waiting areas for short-to-medium duration guest seating
Training room	Deploy in rows or around training tables where users do not require individual height adjustment
Manager office guest zone	Position in front of a desk for one or two visitors facing the workstation
Open office collaboration area	Use at small meeting tables for temporary project discussions
Public service counter	Install at consultation counters where floor protection and stable seating are required
Recommended table height	Pair with 720 to 760 mm meeting or work tables
Cleaning environment	Suited to indoor dry commercial spaces with regular vacuuming and damp-wipe maintenance

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 16139 applicability	Use Level 2 strength, durability, and safety requirements for non-domestic seating
EN 1022 applicability	Apply chair stability testing for forward, rearward, and lateral overturning risk
EN 1728 applicability	Use standardized strength and durability test methods for seating components
EN 1021-1 applicability	Require smouldering-cigarette ignition resistance for upholstered seat materials when fire compliance is specified
EN 1021-2 applicability	Require match-flame ignition resistance for upholstered seat materials when the project mandates it

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

North America procurement and testing reference	Recommended references: ANSI/BIFMA X5.1

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 10357.2 applicability	Apply the furniture mechanical property test for chair and stool stability
GB/T 10357.3 applicability	Apply chair and stool strength and durability test methods for seat, back, arms, and frame
GB/T 28001 applicability	Use occupational health-and-safety management criteria for procurement documentation
GB 20286 applicability	Specify flame-retardant requirements for public-building furniture upholstery when required by the project

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 10357.2 applicability：Apply the furniture mechanical property test for chair and stool stability；
2. GB/T 10357.3 applicability：Apply chair and stool strength and durability test methods for seat, back, arms, and frame；
3. GB/T 28001 applicability：Use occupational health-and-safety management criteria for procurement documentation；
4. GB 20286 applicability：Specify flame-retardant requirements for public-building furniture upholstery when required by the project；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · UBC-MESH-SLED-620

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · UBC-MESH-SLED-620

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · UBC-MESH-SLED-620打开导出工具

页面快速操作

发布采购询价

产品描述

The Mesh Back Visitor Conference Chair with Blue Padded Seat and Black Sled Base, model UBC-MESH-SLED-620, is a fixed-position office conference and visitor chair. Its gray woven polymer mesh back is stretched within a black rigid polymer outer frame with a softly rounded perimeter, creating an open, structured appearance. A contoured central mesh zone is integrated into the backrest to provide fixed lower-back support. The blue woven fabric seat adds a distinct visual accent against the black frame, while black molded arm pads and a continuous sled-style tubular structure give the chair a coordinated professional look. The chair combines cushioned seating with a rigid support structure. The seat uses blue woven fabric over a padded cushion, with molded polyurethane foam and a rigid polymer load-bearing seat pan beneath. The fixed armrests have rounded rectangular black molded polymer pads, supported by black coated steel tubular sections that connect into the cantilever base. The base itself is a black powder-coated bent steel sled frame fitted with four polymer glides, which distribute the load and reduce direct metal contact with the floor. Designed for straightforward, stable seating, the chair has no casters, swivel mechanism, gas lift, seat-height control, tilt lock, or recline actuator. It maintains a fixed upright posture and a fixed seat height, making it suitable where a consistent seat position and a quiet, non-rolling base are preferred. The integrated lumbar zone supports the lower back, and the fixed loop-form armrests provide forearm support. The chair is intended for single-seat occupancy and has an overall dimension of 620 by 650 by 1010 mm, a net weight of 13 kg, and clear armrest spacing suited to standard conference seating layouts. This model fits meeting rooms, reception and waiting areas, training rooms, manager office guest zones, open-office collaboration spaces, and public service consultation counters. It works especially well around conference or training tables, in rows for training layouts, and in reception settings where visitors remain seated for short to medium periods. It is also appropriate at consultation counters where floor protection and stable seating are priorities. For procurement planning, the chair is supplied unbranded and without visible branding marks. Each set is packed in two cartons, with a packaged gross weight of 23 kg and a reference assembly time of 40 minutes per set. Buyers should confirm delivery and storage arrangements against the listed carton dimensions and volume, and allow installation time for multiple units. The fixed configuration should be matched to tables and counters that suit a non-adjustable seat height, and the sled base should be considered for spaces where rolling or swiveling chairs are undesirable.

Mesh Back Visitor Conference Chair with Blue Padded Seat and Black Sled Base Specifications

供应商与现货