纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	580 × 550 × 1050 mm
Seat width	480 mm
Seat depth	460 mm
Seat height range	500 mm
Backrest width	470 mm
Backrest height	520 mm
Armrest height from seat	210 mm
Five-star base diameter	600 mm
Caster diameter	50 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Recommended static weight capacity	120 kg
Net weight reference	12 kg
Seat foam density reference	25 kg/m³
Back mesh abrasion resistance reference	30000 cycles
Caster rolling durability reference	100000 cycles
Tilt angle range	12 degrees
Maximum tilt angle	12 degrees
Foam rebound rate	45%
Seam tensile strength	150 N/cm
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Backrest panel	Black woven nylon mesh stretched over a rigid plastic frame
Seat cushion	Black woven fabric upholstery over polyurethane foam padding
Armrests	Hard black plastic fixed arm supports with integrated top pads
Chair base	Black nylon five-star base with ribbed structural reinforcement
Gas lift cylinder	Chrome-plated steel pneumatic height adjustment cylinder
Tilt mechanism	Black steel under-seat tilt mechanism with single control lever
Casters	Black plastic twin-wheel casters with swivel stems
Back frame	Black rigid plastic outer frame securing the mesh panel
Seat inner frame	Plywood structural board with steel bracket mounting points, encased within foam and upholstery
Control lever	Black rigid plastic lever arm attached to the tilt mechanism steel plate with metal fasteners
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Seat height adjustment	Pneumatic height adjustment operated by left-side lever, with a maximum 100mm travel range
Swivel function	360-degree full rotation around the central gas lift axis, supported by a five-point rolling base
Center tilt mechanism	Single-lever activated backward tilt with a maximum 12-degree recline angle, including tension adjustment via rotary knob
Mobile rolling base	Five twin-wheel casters enabling smooth movement across hard floor and low-pile carpet surfaces
Fixed forearm support	Rigid fixed-position armrests that provide stable forearm support at a 210mm height above the seat cushion, without height, width or pivot adjustment
Full swivel function	360-degree continuous rotation around the central gas lift axis, supported by a five-point rolling base
Center tilt recline	Single-lever activated backward center tilt with a maximum 12-degree recline angle, including spring tension adjustment via under-seat rotary knob
Tilt tension control	Clockwise rotary knob adjustment to increase tilt resistance, with a maximum 5-turn adjustment range from minimum to maximum tension
Breathable back support	Tensioned nylon mesh backrest that conforms to upper back curvature and provides passive ventilation during seated use
Recline Angle / Lock Reference	125° with 3 suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Packaging units per set	1 carton
Reference carton dimensions	650 x 550 x 300 mm
Reference gross weight per carton	14 kg
Reference CBM per carton	0.107 CBM
Assembly time per unit	30 minutes
20ft container loading quantity	320 units
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Open-plan office workstations	Suitable for daily 8-hour desk work in open office environments, paired with standard height desks between 720mm and 760mm
Small and medium enterprise office use	Cost-effective seating solution for administrative staff, customer service teams and entry-level office positions
Conference and meeting rooms	Appropriate for fixed-seating meeting rooms as stackable or individually arranged visitor and participant seating
Home office work setups	Suitable for home study and remote work use, compatible with standard 1600 mm wide home office desks
Temporary workstations and training rooms	Suitable for training centers and temporary work areas due to simple assembly, easy mobility and durable mesh construction
Small and medium enterprise administrative offices	Cost-effective seating solution for administrative staff, customer service teams and entry-level office positions with standard daily use requirements
Shared co-working space seating	Suitable for shared co-working desk areas as durable, low-maintenance task seating for rotating users with standard body dimensions
Customer reception and visitor areas	Appropriate for office visitor zones and front-desk waiting areas as functional, space-efficient seating for short-duration stays

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

Office furniture - Office chairs - Requirements for safety, strength and durability	EN 1335:2020
Ergonomics of the work environment - Office furniture - Office chairs	EN 1335:2019
Furniture - Safety requirements for upholstered furniture	EN 1021:2014

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

Office Chairs - General Requirements for Stability and Structural Integrity	ANSI/BIFMA X2021
Legislative and Regulatory Requirements for Upholstered Furniture Flammability	ANSI/BIFMA X2017

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

General technical requirements for office furniture	GB/T 3326
Limits of harmful substances for wooden furniture	GB 18584
Upholstered furniture flammability requirements	GB 20286

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. General technical requirements for office furniture：GB/T 3326；
2. Limits of harmful substances for wooden furniture：GB 18584；
3. Upholstered furniture flammability requirements：GB 20286；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · OC-MB-MESH-001

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · OC-MB-MESH-001

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · OC-MB-MESH-001打开导出工具

页面快速操作

发布采购询价

产品描述

This mid-back mesh task office chair with fixed armrests presents a streamlined, practical visual profile suited to a range of work settings, with a compact rectangular mesh back panel, padded fabric seat, and strght fixed armrests mounted directly to the seat frame. Its black nylon five-star base supports five twin-wheel casters, creating a balanced, unobtrusive silhouette that aligns with neutral commercial and residential workspace aesthetics, with no decorative flourishes to distract from functional use. Construction centers on a tensioned black woven nylon mesh back stretched over a rigid plastic outer frame, paired with a seat featuring black woven fabric upholstery over polyurethane foam padding. The chair’s support structure includes a plywood inner seat frame with steel mounting brackets, a chrome-plated steel pneumatic gas lift cylinder, and a black steel under-seat tilt mechanism secured with metal fasteners. Fixed hard black plastic armrests with integrated top pads attach directly to the seat frame, while the ribbed-reinforced black nylon five-star base holds five swiveling black plastic twin-wheel casters. A single rigid plastic control lever sits on the left side of the seat, paired with an under-seat rotary tension knob for tilt adjustment. Key functional features include pneumatic seat height adjustment operated via the left-side lever, 360-degree full rotation around the central gas lift axis, and a center tilt mechanism with a maximum 12-degree backward recline angle, with tilt tension adjustable through the under-seat rotary knob. The mesh backrest delivers breathable passive ventilation and conforms to upper back curvature during seated use, while the fixed armrests provide stable forearm support above the seat cushion. The five-caster rolling base enables smooth movement across hard floor and low-pile carpet surfaces, supporting flexible space reconfiguration. This chair fits a diverse set of spaces, including open-plan office workstations paired with standard height desks, small and medium enterprise administrative offices, customer service teams, and entry-level positions as a cost-effective seating solution. It works well in conference and meeting rooms as individually arranged participant seating, in shared co-working spaces as low-maintenance task seating for rotating users, and in customer reception and visitor areas for short-duration stays. For residential use, it complements home office setups and study spaces, and it also suits temporary workstations and training rooms due to its simple assembly and easy mobility. Procurement teams should note this is an unbranded entry-level model with a recommended static weight capacity of 120 kg, intended for standard dly use. The chair ships in a flat-packed carton for cost-efficient freight, with single-person assembly using basic tools. For bulk orders, standard contner loading configurations support volume purchasing planning. Material grades, gas lift certification, and exact component performance data require direct supplier verification for projects with strict compliance or durability requirements.

Mid-Back Mesh Task Office Chair with Fixed Armrests Specifications

供应商与现货