纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	670 × 680 × 1280 mm
Overall footprint	670 x 680 x 1280 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Chair net weight	18.5 kg
Rated user weight	136 kg
Seat foam static load rating	160 kg
Gas lift vertical stroke	80 mm
Back recline range	95 to 120 degrees
Caster rolling durability target	100000 cycles
Base static load target	1134 kg
Recommended daily occupancy	8 hours
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Back and headrest suspension	Gray woven engineered mesh held in a rigid polymer frame, visible through the open back and headrest
Seat cushion	Molded polyurethane foam pad with gray woven or mesh-faced upholstery over a load-bearing seat shell
Seat foam specification	55 mm thick molded foam with 45 kg/m3 density and 40% rebound target
Upholstery fabric	Gray polyester mesh or textile with 30000-cycle Martindale abrasion acceptance target
Back frame and arm supports	Light gray injection-molded polymer frame with integral side rails and fixed arm supports
Mechanism and lifting column	Black steel multi-position tilt mechanism with a black telescoping gas lift and painted center sleeve

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Height adjustment	Pneumatic seat-height lift operates through an 80 mm stroke using the right-side lever under the seat
Recline and lock control	Synchro-tilt mechanism reclines the back to 120 degrees and provides up to 4 lock positions
Head and neck support	Curved mesh headrest moves 90 mm vertically and pivots 25 degrees to align with the cervical spine
Mobility and swivel	360-degree swivel seat and five 60 mm twin-wheel casters enable movement on hard floors or low-pile carpet

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Carton dimensions	760 x 650 x 380 mm
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Individual office workstation	Suited to desk-based staff requiring lumbar mesh support, adjustable head support, and 8-hour seated mobility
Home office or shared commercial workspace	Neutral gray finish and compact 670 mm footprint fit private offices, study rooms, and hot-desk stations

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 1335-1	Office furniture seating dimensions; use to verify seat-height range, seat dimensions, back support, and clearance
EN 1335-2	Office furniture seating safety requirements; use for structural stability, shear points, and mechanism integrity
EN 1335-3	Office furniture seating test methods; apply to static load, fatigue, impact, and caster durability verification
EN 1021-1 and EN 1021-2	Upholstered furniture ignition resistance using cigarette and match ignition sources

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.1	Commercial office chairs standard; verify back, seat, arm, base, tilt mechanism, casters, and stability to the applicable test sections

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 10357.3	Test method for furniture strength and durability of seating products; apply to backrest, seat, and arm static and cyclic loads
GB/T 28004.1	Office furniture seating part 1: ergonomic and structural requirements suitable for commercial task chairs
GB 18584	Indoor decorative and furnishing material limit for formaldehyde emission; apply to any wood-based or upholstered chair components

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 10357.3：Test method for furniture strength and durability of seating products; apply to backrest, seat, and arm static and cyclic loads；
2. GB/T 28004.1：Office furniture seating part 1: ergonomic and structural requirements suitable for commercial task chairs；
3. GB 18584：Indoor decorative and furnishing material limit for formaldehyde emission; apply to any wood-based or upholstered chair components；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · ERC-MESH-GY-HR5-01

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · ERC-MESH-GY-HR5-01

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · ERC-MESH-GY-HR5-01打开导出工具

页面快速操作

发布采购询价

产品描述

The Gray Mesh Ergonomic Task Chair with Height-Adjustable Headrest presents a clean, functional profile suited to prolonged desk work. Its high-back form uses gray woven engineered mesh across the back and headrest, held within a rigid light-gray polymer frame with integrated side rails and fixed arm supports. The open mesh structure gives the chair a breathable, streamlined appearance, while the curved headrest and contoured back create a structured ergonomic silhouette. A black steel tilt mechanism, gas-lift column, five-star base, and twin-wheel casters provide a visual contrast to the gray seating surfaces. The chair has an overall footprint of 670 x 680 x 1280 mm, with 540 mm of clear width between the fixed armrests. Construction combines a load-bearing seat shell, molded polyurethane foam cushion, and gray woven or mesh-faced upholstery. The finished seat cushion is 90 mm thick, while the molded foam specification references a 55 mm foam core at 45 kg/m3 density with a 40 percent rebound target. The backrest includes 70 mm of padding thickness and a lumbar support zone 240 mm high. Supporting components include a black steel multi-position tilt mechanism, black telescoping gas lift, painted center sleeve, five-star base, and five 60 mm twin-wheel casters. The chair has a net weight of 18.5 kg, a rated user weight of 136 kg, and a seat foam static load rating of 160 kg. The upholstery carries a 30,000-cycle Martindale abrasion acceptance target, while the caster rolling durability target is 100,000 cycles and the base static load target is 1134 kg. Practical adjustment is centered on daily seating comfort and movement. A right-side lever under the seat controls pneumatic seat-height adjustment through an 80 mm stroke. The synchro-tilt mechanism allows the back to recline to 120 degrees and offers up to four lock positions. The curved mesh headrest moves 90 mm vertically and pivots 25 degrees, helping users align support with the cervical spine. A 360-degree swivel seat and twin-wheel casters support mobility across hard floors and low-pile carpet. This unbranded model, ERC-MESH-GY-HR5is appropriate for individual office workstations, private offices, home studies, and shared hot-desk settings where a neutral gray finish and compact scale are preferred. Procurement teams should note the two-carton packaging, 23 kg packaged gross weight, 0.26 cubic meter carton volume, and assembly time of 40 minutes per set. Fixed armrests should be checked against desk clearance, while mesh support and adjustable headrest features should be matched to user needs and workplace seating standards.

Gray Mesh Ergonomic Task Chair with Height-Adjustable Headrest Specifications

供应商与现货