纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	900 × 600 × 2000 mm
Upper door height	1300 mm
Lower door height	640 mm
Side panel thickness	25 mm
Top panel overhang	20 mm
Plinth base height	60 mm
Internal hanging zone height	1200 mm
Internal fixed shelf height (upper zone)	300 mm
Lower storage zone internal height	580 mm
Door panel thickness	18 mm
Carcass Panel Thickness	25 mm
Back Panel Thickness	9 mm
Door / Drawer Front Thickness	22 mm
Shelf Thickness	25 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Assembled net weight	85 kg
Top panel static load capacity	50 kg
Recommended maximum user load for lower storage	60 kg
Door hinge cycle rating	80000 opening/closing cycles
Anti-tip device load rating	100 kg
Recommended maximum total internal load	60 kg
Anti-tip device pull-out load rating	100 kg
Shelf Distributed Load	30 kg/shelf
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Angle / Life	165°; 80000 cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Main cabinet panels	18mm/25mm E1-grade particleboard with matte dark grey thermofused laminate finish
Edge trim	Polished chrome-plated steel vertical edge profiles at front corners
Handle strip	Dark matte finish horizontal aluminum handle spanning full width at door division
Plinth and top trim	Matte dark grey PVC edge banding matching cabinet panels
Door hinges	Soft-close concealed steel cabinet hinges
Internal hanging rail	25mm diameter oval chrome-plated steel rail
Internal shelves	18mm matching matte grey laminated particleboard
Back panel	3mm hardboard with dark grey finish
Adjustable feet	15mm diameter nylon leveling feet under plinth
Main cabinet structural panels	25mm E1-grade particleboard with matte dark grey thermofused laminate finish, used for side, top and bottom structural components
Door panels	18mm E1-grade particleboard with matching matte dark grey thermofused laminate finish, routed for concealed hinge installation
Vertical corner trim	Polished chrome-plated steel profiles running full height of front cabinet corners, fitted to panel edges for impact protection

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Door operation	Four flat panels (two upper, two lower) hinged on outer edges, opening 110 degrees outward to expose full internal storage width
Soft-close door mechanism	Doors close with damped motion to prevent slamming, with 5 degree auto-close pull in
Internal storage zoning	Upper zone fitted with one hanging rail and one top shelf; lower zone fitted with one fixed shelf for folded storage
Shelf adjustability	Shelf supports accept 5mm shelf pins at 32mm vertical increments, allowing shelf height adjustment in 32mm steps
Anti-tip safety	Wall anchor bracket included to secure cabinet back to wall studs, preventing forward tipping when doors are open
Leveling adjustment	Concealed adjustable feet at base provide 10mm vertical adjustment to compensate for uneven floor surfaces
Door gap alignment	3mm uniform gap between adjacent door panels, with factory-adjusted hinge alignment for consistent fit
Shelf height adjustment	Shelf supports accept 5mm shelf pins at 32mm vertical increments across both upper and lower zones, allowing shelf height repositioning in 32mm steps
Cable / Vent Opening Reference	If fitted, 80 mm diameter

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Number of shipping cartons	2
Shipping carton dimensions (panel carton)	2050 x 650 x 120 mm
Shipping carton dimensions (hardware carton)	600 x 400 x 150 mm
Total shipping gross weight	95 kg
Total shipping volume (CBM)	0.196 CBM
Assembly time	120 minutes
20ft GP container loading quantity	132 units
40ft HQ container loading quantity	330 units
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Residential bedroom wardrobe	Primary use as compact two-person clothing storage in small to medium bedrooms, with dedicated space for long hanging garments and folded items
Apartment entryway storage	Suitable for entryway use as outerwear, shoe and accessory storage in urban apartments, with narrow footprint to save floor space
Home office document storage	Can be used in home offices to store files, office supplies and equipment behind closed doors for a clutter-free workspace
Hotel guest room wardrobe	Suitable for mid-tier hotel guest rooms as guest clothing storage, with durable laminate finish resistant to wear and frequent cleaning
Rental property furnishing	Ideal for furnished rental properties due to durable construction, simple assembly and neutral dark grey finish matching most interior schemes
Mid-tier hotel guest room wardrobe	Suitable for mid-tier hotel guest rooms as guest clothing storage, with durable matte laminate finish resistant to wear and frequent cleaning by housekeeping staff
Furnished rental property installation	Ideal for furnished rental properties due to durable construction, simple flat-pack assembly and neutral dark grey finish that matches most interior design schemes

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 14749:2016	Applicable European standard for domestic and kitchen storage furniture, defining stability, strength and durability requirements for tall cabinets
EN 312:2010	Applicable standard for particleboard panels, defining minimum mechanical properties for load-bearing cabinet components
EN 13986:2004+A1:2015	Applicable standard for wood-based panels for construction use, defining formaldehyde emission classification requirements for CE marking
EN 12521:2015	Applicable European standard for domestic furniture strength, durability and safety requirements for storage units; no certification claimed

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

北美市场选型与验收参考	ANSI/BIFMA X5.9 办公储物单元

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	Applicable general technical requirement standard for wooden furniture cabinets, defining dimensional tolerance, edge quality and structural strength requirements for acceptance
GB 18580-2017	Applicable standard for formaldehyde emission limits from wood-based panels, requiring E1 grade (≤0.124mg/m³) emission for indoor use
GB/T 4893.8-2013	Applicable standard for surface abrasion resistance testing of furniture finishes, suitable for validating durability of the matte laminate surface
GB/T 10357.5-2011	Applicable standard for cabinet furniture strength and durability testing, covering shelf load, door operation and structural stability performance; no certification claimed

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：Applicable general technical requirement standard for wooden furniture cabinets, defining dimensional tolerance, edge quality and structural strength requirements for acceptance；
2. GB 18580-2017：Applicable standard for formaldehyde emission limits from wood-based panels, requiring E1 grade (≤0.124mg/m³) emission for indoor use；
3. GB/T 4893.8-2013：Applicable standard for surface abrasion resistance testing of furniture finishes, suitable for validating durability of the matte laminate surface；
4. GB/T 10357.5-2011：Applicable standard for cabinet furniture strength and durability testing, covering shelf load, door operation and structural stability performance; no certification claimed；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · WDM-TW900-2D2D-G

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · WDM-TW900-2D2D-G

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · WDM-TW900-2D2D-G打开导出工具

页面快速操作

发布采购询价

产品描述

The Tall Double-Door Freestanding Storage Wardrobe Cabinet (model WDM-TW900D2D-G, unbranded) presents a streamlined, vertically oriented silhouette defined by a uniform matte dark grey exterior, accented by polished chrome-plated steel trim running the full height of its front vertical corners and a continuous dark matte horizontal aluminum handle strip set at the division between its upper and lower door pairs. A subtle top panel overhang and matching dark grey PVC-trimmed rsed plinth base lend a polished, finished look to the unit, with consistent narrow gaps between the two upper and two lower outward-hinged door panels for a clean, aligned appearance. Constructed with 25mm thick E1-grade particleboard for structural side, top, and bottom carcass panels, and 18mm thick matching laminated particleboard for flat door panels, the cabinet features impact-protective metal corner trim, soft-close concealed steel hinges, and a 9mm thick dark grey finished hardboard back panel fitted into panel grooves for added rigidity. Its interior uses a 25mm thick matte grey laminated fixed shelf in the upper zone, paired with a chrome-plated oval steel hanging rl for long garments, while the lower enclosed zone offers open stacked storage space. Shelf positions are adjustable via standard 32mm-spaced pin holes, concealed nylon leveling feet at the plinth compensate for minor floor unevenness, and an included wall anchor anti-tip device secures the unit to wall studs for safety. The matte laminate surface resists visible fingerprints and minor scuffs, and hinges are rated to support extended regular use without performance decline. This cabinet fits a wide range of settings: it serves as primary clothing storage for small to medium residential bedrooms, works as space-saving outerwear and accessory storage in narrow apartment entryways, provides concealed document and supply storage for tidy home offices, acts as durable guest storage for mid-tier hotel rooms, and offers low-maintenance, style-neutral furnishing for furnished rental properties. Its narrow depth avoids obstructing standard walkway clearances in high-traffic areas. For procurement, note the unit ships in two flat-packed cartons, requiring assembly with basic hand tools. Buyers should confirm exact panel grade and hardware specifications with suppliers prior to bulk orders, as core material details are aligned to standard category construction. Shipping configurations support optimized full-contner loading for large volume orders, and the neutral finish coordinates with most existing interior palettes without additional design coordination.

Tall Double-Door Freestanding Storage Wardrobe Cabinet Specifications

供应商与现货