纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	2000 × 400 × 2000 mm
Upper glass door section height	900 mm
Lower solid door section height	1100 mm
Single glass door width	400 mm
Right upper solid door width	400 mm
Single lower solid door width	400 mm
Internal shelf depth	360 mm
Plinth base height	80 mm
Aluminum door frame profile thickness	26 mm
Upper glass door thickness	4 mm
Lower solid door panel thickness	16 mm
Carcass side panel thickness	16 mm
Internal shelf thickness	16 mm
Back panel thickness	5 mm
Carcass Panel Thickness	25 mm
Door / Drawer Front Thickness	22 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Total product net weight	90 kg
Static load capacity per internal shelf	35 kg
Key lock open/close cycle rating	5000 cycles
Door hinge cycle rating	80000 cycles
Laminate surface scratch resistance	2000 revolutions
Tempered glass impact resistance	10 J
Shelf Distributed Load	30 kg/shelf
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Angle / Life	165°; 80000 cycles
Anti-tip Fixing Reference	Products above 1200 mm should use at least 2 wall fixing points

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Carcass panels	E1 grade particleboard with walnut woodgrain laminate finish
Upper door frames	Silver anodized aluminum alloy with matte finish
Upper door panels	4mm thick clear tempered safety glass
Lower door panels	16mm thick MDF core with matching walnut woodgrain laminate
Back panel	5mm thick hardboard with smooth matte finish
Door pull handles	150mm long black metal vertical bar pulls
Lock hardware	Zinc alloy keyed cam locks for lower compartments
Door hinges	Cold-rolled steel concealed hinges with nickel plating
Shelf support pins	Nickel-plated steel shelf pins for 32mm system adjustable holes
Plinth base	Matching walnut woodgrain laminate panel with PVC edge banding
Edge banding	1mm thick PVC edge banding matching walnut woodgrain finish
Internal shelves	16mm thick white laminate particleboard

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Upper glass door compartments	4 hinged doors with full-length vertical pulls, opening to 105 degrees for access to open storage
Lower solid door compartments	5 hinged lockable doors with keyed cam locks, restricting unauthorized access to stored documents
Adjustable internal shelves	8 height-adjustable shelves on 32mm spaced pin holes, allowing customized compartment heights for different storage items
Dust protection	Fully enclosed door seals on all compartments prevent dust accumulation on stored documents and supplies
Anti-tip safety	Wall anchoring hardware included to secure cabinet to interior wall, preventing tip-over during full load use
Door operation	All doors open outward via concealed hinges, no protruding hardware to snag clothing or supplies
Storage zone split	Upper zone provides visible document/display storage, lower zone provides concealed secured storage for files and supplies
Cable / Vent Opening Reference	If fitted, 80 mm diameter

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 700× 350 mm/carton according to carcass split
Reference Packaged Gross Weight	100 kg/set in 3 cartons
Reference Packaging Volume	0.65 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Office document storage	Suitable for placement in open office areas, executive offices and administrative work zones for organized file and supply storage
Background wall placement	Designed for flat alignment against interior walls as a background storage unit behind workstations or reception areas
Mixed storage use	Ideal for storing frequently referenced documents in upper glass compartments and confidential files in lower locked sections
Small office break rooms	Suitable for supply and tableware storage in office pantries with dust-protected enclosed compartments
Government and education facilities	Durable construction and lockable storage suitable for school administrative offices and government document rooms
Matching office furniture sets	Coordinates with walnut woodgrain office desks, conference tables and bookcases for uniform workspace design

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 14073-2:2004	Office furniture - Storage furniture - Part 2: Safety requirements, applicable to anti-tip and structural safety checks
EN 14073-3:2004	Office furniture - Storage furniture - Part 3: Test methods for stability and strength, applicable to load testing
EN 12150-1:2015	Glass in building - Thermally toughened soda lime silicate safety glass, applicable to upper door glass acceptance

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.9-2019	Storage Furniture Safety and Performance Standard, applicable to commercial office storage cabinet testing
ANSI/BIFMA e3-2014	Furniture Sustainability Standard, applicable to environmental attribute verification for commercial projects

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to dimensional and structural quality inspection
GB 18580-2017	Formaldehyde emission limit for wood-based panels, applicable to E1 grade panel acceptance
GB/T 28202-2011	Office furniture general specifications, applicable to structural and performance testing
GB/T 28204-2011	Office storage cabinets performance test methods, applicable to load and durability testing

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable to dimensional and structural quality inspection；
2. GB 18580-2017：Formaldehyde emission limit for wood-based panels, applicable to E1 grade panel acceptance；
3. GB/T 28202-2011：Office furniture general specifications, applicable to structural and performance testing；
4. GB/T 28204-2011：Office storage cabinets performance test methods, applicable to load and durability testing；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · OSC-W2000-D400-H2000-GL4-LD5

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · OSC-W2000-D400-H2000-GL4-LD5

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · OSC-W2000-D400-H2000-GL4-LD5打开导出工具

页面快速操作

发布采购询价

产品描述

This tall floor-standing office storage cabinet features a balanced two-section vertical layout aligned to sit flush against interior walls, creating a streamlined, cohesive backdrop for workspaces. The upper zone holds four clear tempered safety glass doors set in silver anodized matte aluminum frames, paired with 150mm black metal vertical bar pulls, while the lower zone features five solid walnut woodgrain doors fitted with matching hardware, anchored by an 80mm plinth base for a polished, elevated profile. The cabinet measures 2000mm wide, 400mm deep, and 2000mm tall, with a 900mm tall upper glass section and 1100mm tall lower solid door section to separate visible and concealed storage. Its core structure is built from E1 grade particleboard finished with scratch-resistant walnut woodgrain laminate, supported by durable hardware across all components. Upper door panels use 4mm thick tempered safety glass, while lower door panels consist of 16mm MDF core clad in matching walnut laminate. The 5mm smooth matte hardboard back panel encloses the unit fully, with cold-rolled steel nickel-plated concealed hinges, zinc alloy keyed cam locks, and nickel-plated steel shelf pins supporting the internal fit-out. All doors open outward to 105 degrees without protruding hardware that could snag clothing or supplies, with seals that block dust from accumulating on stored contents. Functional design supports flexible, secure organization: eight height-adjustable shelves fit into 32mm spaced pin holes, letting users customize compartment heights for different items, with each shelf supporting 35kg of static load. The upper glass compartments offer visible, easy access to frequently referenced materials, while the lower lockable compartments restrict unauthorized access to confidential documents. Wall anchoring hardware is included to prevent tip-over during fully loaded use, with rated durability for 80,000 door hinge cycles, 5000 lock operation cycles, 2000 revolutions of scratch resistance on laminate surfaces, and 10J impact resistance for the tempered glass panels. This cabinet suits a range of commercial spaces, including open office floors, executive offices, administrative work zones, reception backdrops, office pantries, school administrative offices, and government document rooms. It coordinates seamlessly with matching walnut woodgrain desks, conference tables, and bookcases for uniform workspace design, supporting dual use for displayed reference materials and secured, dust-protected file and supply storage. For procurement, note the unit ships in split cartons with a total packaged gross weight of 100kg and 0.65 cubic meters of packaging volume, requiring 40 minutes of on-site assembly per set. Confirm site wall suitability for anti-tip anchoring and layout alignment prior to installation to ensure proper fit.

Tall Floor-Standing Office Storage Cabinet with Upper Aluminum-Framed Glass Doors and Lower Lockable Walnut Woodgrain Doors Specifications

供应商与现货