基础物理尺寸
mm / 英寸自动双单位换算 · 工程采购基础规格
数据来源:工厂资料结构化字段,最终以实测值为准
| 产品外部尺寸(宽 × 深 × 高) | 4800 × 450 × 2200 mm | |
|---|---|---|
| Carcass Panel Thickness | 25 mm | |
| Back Panel Thickness | 9 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
重量、承重与性能参数
净重 / 最大承重 / 适用人数 / 耐久性能
数据来源:产品性能数据,采购前请核对具体测试口径
| Total storage bays | 8 upper bays and 1 continuous lower storage bank | |
|---|---|---|
| Long-garment hanging capacity | 4 compartments | |
| Display shelf count | 3 full-width central shelves | |
| Shelf static load capacity | 20 kg per shelf | |
| Display shelf static load | 20 kg per shelf | |
| Lower base distributed load | 120 kg | |
| Drawer slide durability | 50000 open-close cycles per drawer if drawers are fitted in the base | |
| Hinge durability | 100000 open-close cycles per glass-door hinge | |
| Hinge opening angle | 110 degrees per door | |
| Cabinet total static storage load | 500 kg |
材质与结构参数
工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料
数据来源:以工厂材质清单与验货报告为准
| Carcass panels | 25 mm engineered-wood panels with matched wood-grain veneer and sealed edges form the load-bearing cabinet body | |
|---|---|---|
| Interior and shelf finish | 18 mm light-gray matte engineered-wood boards form open shelves, dividers, and horizontal surfaces | |
| Lower base front | 18 mm wood-grain veneered engineered-wood doors or panels with continuous vertical grain | |
| Back panel | 9 mm engineered-wood backing board with light-gray matte finish in open display zones | |
| Glass doors | 5 mm smoked tempered glass panels set in narrow black perimeter framing | |
| Door hinges | Concealed metal cup hinges with mounting plates for framed glass doors |
功能与调节参数
升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能
数据来源:功能配置参数,以供应商正式规格为准
| Wardrobe storage | Four 540 mm wide glass-door compartments provide 1500 mm clear hanging height for coats, jackets, and shirts | |
|---|---|---|
| Open display storage | Three horizontal display levels present books, art, plants, and ornaments with 380 mm shelf depth | |
| LED illumination | Three warm-white LED circuits provide top-down lighting at 3000K with a low-voltage 24 V driver position in the base | |
| Door operation | Four hinged smoked-glass doors open 110 degrees and use self-closing or soft-close hinges where specified |
包装与物流参数
经核验的外箱 / 毛重 / 组装 / 装柜数据
数据来源:外贸报价与装柜测算参考
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
应用场景与使用方式
推荐空间 / 目标用户 / 使用方式
数据来源:依据产品结构与品类整理的推荐应用场景
| Executive office or boardroom anteroom | combines coat storage for four users with illuminated display for awards, books, and art. | |
|---|---|---|
| High-end residential walk-in or bedroom wall | stores jackets in glass-door bays while the open center displays curated personal objects. |
欧盟市场准入要求 * EN 标准
欧洲市场准入与化学品要求
北美市场采购验货参考 * ANSI/BIFMA 标准
美国及加拿大家具标准
| 北美市场选型与验收参考 | ANSI/BIFMA X5.9 办公储物单元 |
|---|
适用于中国市场项目的标准 * GB 标准
适用于中国市场项目的标准
| GB/T 3324-2017 General technical requirements for wooden furniture | recommended acceptance basis for panel dimensions, workmanship, stability, and finish. | |
|---|---|---|
| GB/T 3325-2017 General test methods for metal furniture | recommended for rod, hinge, trim, and restraint hardware inspection. | |
| GB/T 10357.5-2011 Furniture mechanical tests | recommended shelf, door, and storage-strength acceptance protocol. | |
| GB/T 28204-2020 Residential built-in cabinet | recommended guideline for wardrobe clearances, hardware, and installation tolerances. | |
| GB 17945-2023 or applicable electrical safety requirements for LED power supplies | recommended for low-voltage lighting and driver compliance verification. |
本产品须满足以下技术参数要求: 1. GB/T 3324-2017 General technical requirements for wooden furniture:recommended acceptance basis for panel dimensions, workmanship, stability, and finish.; 2. GB/T 3325-2017 General test methods for metal furniture:recommended for rod, hinge, trim, and restraint hardware inspection.; 3. GB/T 10357.5-2011 Furniture mechanical tests:recommended shelf, door, and storage-strength acceptance protocol.; 4. GB/T 28204-2020 Residential built-in cabinet:recommended guideline for wardrobe clearances, hardware, and installation tolerances.; 5. GB 17945-2023 or applicable electrical safety requirements for LED power supplies:recommended for low-voltage lighting and driver compliance verification.; 最终交付参数、检测报告和验收标准以双方采购合同为准。
一键导出完整商品资料
以下文件均根据当前已发布商品参数实时生成。
完整参数报告 PDF
直接下载英文参数报告,可选择公制或英制单位。
完整参数 Excel
导出全部商品信息与参数模块,文件内容统一使用英文。
外贸 Listing 模板
包含英文标题、规格、材质、标准和采购字段,可用于国际平台刊登。
海关申报数据
生成申报品名、材质、用途、尺寸及海关申报要素。
打开导出工具