纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	3200 × 420 × 2200 mm
Carcass Panel Thickness	25 mm
Back Panel Thickness	9 mm
Door / Drawer Front Thickness	22 mm
Shelf Thickness	25 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

net weight	240 kg
Shelf distributed load	30 kg per shelf bay
Concentrated shelf load	15 kg at shelf center
Door panel static load	10 kg per door
Hinge cycle target	80,000 opening cycles
Overall wall-system load	260 kg evenly distributed
Recommended wall anchoring load	120 kg lateral restraint
Recommended users	8 to 12 office staff
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Angle / Life	165°; 80000 cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Structural panels	18 mm melamine-faced engineered-wood board with matching ABS edge banding
Horizontal shelves	25 mm melamine-faced board with concealed support fixing
Rounded end panels	30 mm light-gray curved engineered panel with laminated surface
Door faces	18 mm terracotta lacquered or melamine-faced engineered board
Door core	Moisture-resistant particleboard or MDF core, 18 mm nominal
Back panel	8 mm light-gray backing board in open and enclosed compartments
Base plinth	Black powder-coated steel or rigid PVC recessed plinth
Door hinges	Concealed steel cup hinges with 105-degree opening angle
Shelf supports	Steel cam-and-dowel or metal shelf-bracket connection system
Edge treatment	2 mm PVC or ABS edge banding on exposed door and shelf edges
Surface finish	Matte low-gloss laminate or painted surface on visible panels
Leveling system	Nylon-base adjustable feet concealed inside plinth, 15 mm adjustment

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Mixed storage layout	Four horizontal levels combine 10 open compartments with 8 hinged doors
Door operation	Side-opening hinged doors provide concealed storage with 105-degree maximum swing
Open display function	Three open shelf rows provide 480 mm clear height for books, awards, and samples
Module arrangement	Left and right terracotta door blocks balance two central open storage zones
Rounded safety corners	80 mm radius end panels reduce impact exposure at walkway-facing corners
Leveling and installation	Concealed feet provide 15 mm height adjustment behind the 80 mm black plinth
Anti-tip restraint	Wall anchor bracket recommended at upper rear rail for the 2200 mm tall unit
Door hinge adjustment	Hinges should allow 3 mm lateral, vertical, and depth adjustment at installation
Storage reconfiguration	Fixed central dividers define four bays; removable shelf pins can support future shelf adjustment
Cable and equipment use	One 60 mm rear cable grommet can be specified in an open bay for AV or charging equipment
Cable / Vent Opening Reference	If fitted, 80 mm diameter

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 700× 350 mm/carton according to carcass split
Reference Packaged Gross Weight	100 kg/set in 3 cartons
Reference Packaging Volume	0.65 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Executive office	Place behind or beside a desk to display books and conceal documents in four organized bays
Reception lounge	Use as a feature storage wall for awards, brochures, samples, and reception supplies
Meeting room	Store meeting materials, AV accessories, and reference documents while maintaining display space
Departmental workspace	Provide shared storage for 8 to 12 staff with a 260 kg distributed capacity target
Library or resource center	Arrange multiple units in a row for books and catalog materials with consistent shelf heights
Manager workroom	Separate confidential door storage from open reference display using the alternating modules
Showroom or gallery office	Use terracotta and light-gray color blocking as a spatial accent while retaining practical storage

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 16121 non-domestic storage strength	Use requirements for non-domestic storage furniture, including strength, durability, and stability
EN 16122 storage test methods	Use inspection and test methods for storage furniture to verify shelves, doors, and stability
EN 14073-2 office storage safety	Apply safety requirements for office storage furniture, including stability and safe movement
EN 14073-3 office storage stability	Use stability test requirements for tall freestanding cabinets
EN 717-1 formaldehyde emission	Specify board formaldehyde emission classification by chamber test method

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

北美市场选型与验收参考	ANSI/BIFMA X5.9 办公储物单元

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324 dimensional and structural guidance	Use General Technical Requirements for Wooden Furniture for panel flatness, dimensions, and assembly acceptance
GB/T 3325 metal hardware durability	Use General Technical Requirements for Metal Furniture for metal support and coating checks where steel hardware is supplied
GB 18580 formaldehyde control	Specify engineered-wood board formaldehyde emission acceptance under Indoor Decoration Materials
GB/T 10357 furniture strength tests	Use shelf, door, and structural strength test methods as factory acceptance references
GB 28007 furniture safety	Apply children's-furniture sharp-edge requirements only when installed in child-accessible spaces

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324 dimensional and structural guidance：Use General Technical Requirements for Wooden Furniture for panel flatness, dimensions, and assembly acceptance；
2. GB/T 3325 metal hardware durability：Use General Technical Requirements for Metal Furniture for metal support and coating checks where steel hardware is supplied；
3. GB 18580 formaldehyde control：Specify engineered-wood board formaldehyde emission acceptance under Indoor Decoration Materials；
4. GB/T 10357 furniture strength tests：Use shelf, door, and structural strength test methods as factory acceptance references；
5. GB 28007 furniture safety：Apply children's-furniture sharp-edge requirements only when installed in child-accessible spaces；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · OFC-RND-3200-01

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · OFC-RND-3200-01

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · OFC-RND-3200-01打开导出工具

页面快速操作

发布采购询价

产品描述

The Rounded Modular Office Display and Storage Cabinet is a contemporary storage wall designed to balance open presentation with concealed document storage. Its matte light-gray panel structure is paired with terracotta lacquered doors, open shelves, rounded end panels, and a recessed black plinth, creating a soft but structured appearance suitable for professional interiors. Four horizontal levels combine ten open compartments with eight side-opening hinged doors. The terracotta door modules are positioned at the left and right, balancing two central open storage zones and giving the composition a clear visual rhythm. Construction uses 18 mm melamine-faced engineered-wood panels with matching ABS edge banding for the main structure. Horizontal shelves are 25 mm melamine-faced boards fixed with concealed supports, while rounded end panels are 30 mm light-gray curved engineered panels with a laminated surface. Door faces use an 18 mm terracotta lacquered or melamine-faced engineered board over a moisture-resistant particleboard or MDF core. Open and enclosed compartments include a light-gray backing board, and the cabinet rests on a black powder-coated steel or rigid PVC recessed plinth. Concealed steel cup hinges allow doors to open through a 105-degree angle, and steel cam-and-dowel or metal shelf-bracket connections support the shelving. Functionally, the unit provides three open shelf rows with 480 mm clear height for books, awards, brochures, and samples, while the hinged doors conceal files, supplies, or confidential materials. Each shelf bay is rated for 30 kg distributed load, with a 15 kg concentrated load at shelf center. Door panels carry a 10 kg static load, and the overall wall-system target is 260 kg evenly distributed. The hinge target is 80,000 opening cycles. Rounded 80 mm radius end panels reduce impact exposure at walkway-facing corners, and concealed feet provide 15 mm height adjustment behind the 80 mm plinth. For the 2200 mm tall unit, an upper rear wall anchor bracket is recommended, with a 120 kg lateral restraint load. The cabinet works well behind or beside an executive desk, as a feature wall in a reception lounge, or in meeting rooms for AV accessories and reference documents. It can also serve departmental workspaces for eight to twelve staff, or be arranged in repeated runs in libraries and resource centers. Procurement planning should account for the unbranded model OFC-RND-3200240 kg net weight, assembly time of 40 minutes per set, and packaging records that vary between a two-carton split reference and a three-carton gross-weight entry. Confirm the final packing configuration, finish option, anchoring provision, and site access before order placement.

Rounded Modular Office Display and Storage Cabinet Specifications

供应商与现货