纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	2850 × 350 × 2000 mm
Overall unit dimensions	2850 x 350 x 2000 mm
Single side cabinet bay width	950 mm
Center bay width	950 mm
Open top shelf interior height	250 mm
Center open display shelf interior height	650 mm
Lower closed cabinet interior storage height	700 mm
Shelf panel thickness	30 mm
Door panel thickness	20 mm
Back panel thickness	9 mm
Edge banding thickness	1.5 mm
Quatrefoil grille cutout diameter (side doors)	550 mm
Vertical slat grille spacing (center upper doors)	20 mm
Carcass Panel Thickness	25 mm
Door / Drawer Front Thickness	22 mm
Shelf Thickness	25 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Total unit net weight	350 kg
Per shelf static load capacity	35 kg
Hinge cycle rating	80000 open/close cycles
Door maximum opening angle	110 degrees
Wood moisture content	13%
Recommended maximum load per bay	180 kg
Standard warranty period	3 years
Shelf Distributed Load	30 kg/shelf
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Angle / Life	165°; 80000 cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Main frame and carcass	Solid hardwood with natural grain finish, mortise and tenon joinery
Decorative door grilles	Solid wood slats with quatrefoil and vertical lattice detailing
Lower solid door panels	Solid wood veneer over engineered wood core, matching wood finish
Cabinet shelves	30mm thick solid wood panels, sanded smooth with matching finish
Back panel	9mm thick plywood with wood veneer, sealed for dust protection
Door hardware pulls	Antique brass finish metal ring pulls, mounted flush on door centers
Door hinges	Soft-close concealed steel hinges with brass finish plating
Top edge trim	Woven lattice solid wood molding running full length of unit top
Surface finish	Low-VOC water-based clear wood coating, matte natural wood tone
Foot pads	Non-slip rubber foot pads at base corners to protect flooring
Edge Band Thickness	2 mm
Primary Connector Specification	Reference M6-M8 cam/bolt fittings with at least 2 fixing points at major joints

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Modular 3-bay configuration	Three independent cabinet bays joined to form a continuous wall unit
Open display storage	Top tier open shelves and central open shelf for decor, books and display items
Enclosed concealed storage	Lower solid-door cabinets and upper grille-door cabinets for dust-protected storage
Adjustable shelf positions	5 shelf pin holes per cabinet section to customize shelf height
Soft-close door operation	Hinges dampen door closure to prevent slamming and reduce noise
Anti-tip safety hardware	2 wall anchor straps included to secure unit to wall and prevent tipping
Optional LED strip lighting	Recessed LED strips can be installed under top shelves for display illumination
Leveling base adjustment	Adjustable foot pads to compensate for uneven floor surfaces
Cable / Vent Opening Reference	If fitted, 80 mm diameter

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 700× 350 mm/carton according to carcass split
Reference Packaged Gross Weight	100 kg/set in 3 cartons
Reference Packaging Volume	0.65 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Executive office back wall placement	Positioned behind executive desk for document storage and decorative display
Private study room storage	Used in home or corporate study rooms for book and collectible display
Tea room display storage	Suitable for tea room display of tea ware, art and cultural items
Reception area display	Can be used in formal reception areas to display corporate awards and decor
Meeting room auxiliary storage	Placed against meeting room walls for document and supply storage
Government and institutional office use	Compliant with standard procurement specs for solid wood office filing storage

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 14749:2016	Applicable to safety and strength requirements for domestic and office storage furniture
EN 71-3:2019+A1:2021	Applicable to migration of certain elements in surface coatings
EN 13986:2004+A1:2015	Applicable to wood-based panels used in construction and furniture

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

北美市场选型与验收参考	ANSI/BIFMA X5.9 办公储物单元

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	Applicable to general technical requirements for wooden office furniture
GB 18584-2001	Applicable to formaldehyde emission limits for interior wood furniture
GB 18581-2020	Applicable to limit of harmful substances in solvent-based wood coatings
GB/T 4897.3-2003	Applicable to particleboard used for furniture structural and non-structural parts

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：Applicable to general technical requirements for wooden office furniture；
2. GB 18584-2001：Applicable to formaldehyde emission limits for interior wood furniture；
3. GB 18581-2020：Applicable to limit of harmful substances in solvent-based wood coatings；
4. GB/T 4897.3-2003：Applicable to particleboard used for furniture structural and non-structural parts；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · OSB-NC3-2700

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · OSB-NC3-2700

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · OSB-NC3-2700打开导出工具

页面快速操作

发布采购询价

产品描述

The New Chinese-style 3-bay Solid Wood Office Storage Bookcase (model OSB-NC2700) is an unbranded floor-standing wall unit designed to blend traditional aesthetic detail with functional office storage. Visually, the unit features a symmetrical 3-bay layout framed by solid hardwood, accented with full-length woven lattice wood molding along its top edge. Its upper sections pair decorative solid wood grille doors, detailed with quatrefoil motifs and vertical slats, with tiered open display shelves, while the lower sections hold flush-mounted solid doors fitted with antique brass finish ring pulls centered on each panel. The matte natural wood tone finish highlights the material’s grain for a warm, understated presence. Constructed with mortise and tenon joinery for the solid hardwood frame, the unit incorporates 30mm thick sanded solid wood adjustable shelves, 20mm thick lower door panels with a solid wood veneer over engineered wood core, a 9mm plywood back panel sealed for dust protection, and soft-close concealed steel hinges plated in matching brass finish. All surfaces are coated with a low-VOC water-based clear wood finish, and wood components maintain a 13% moisture content for stable performance. Functionally, the modular unit combines open display space across its 250mm height top open shelves and 650mm height central open shelf, ideal for showcasing items, with enclosed storage behind upper grille doors and lower solid doors to shield contents from dust. Each cabinet section includes 5 shelf pin holes to customize shelf positioning, while soft-close hinges dampen closure to eliminate slamming and reduce operational noise. Doors open to a 110 degree angle, with hinges rated for 80000 open/close cycles. Each shelf supports a 35kg static load, with a 180kg maximum load per bay, and the unit ships with 2 anti-tip wall anchor straps for safety; optional recessed LED strip lighting can be fitted under top shelves to illuminate displayed items. The bookcase suits a range of formal and semi-formal spaces, including placement behind executive desks for document storage and decorative display, home or corporate private studies for book and collectible organization, tea rooms for showcasing tea ware and cultural artifacts, formal reception areas for displaying corporate awards, meeting room walls for auxiliary supply and document storage, and government or institutional offices that align with standard solid wood office filing storage procurement specifications. For procurement, note the unit measures 2850 x 350 x 2000 mm, with each of its three equal bays measuring 950mm in width, and carries a net weight of 350kg. It ships with reference packaging split across cartons, requires 40 minutes of assembly per set, and is backed by a 3-year standard warranty.

New Chinese-style 3-bay Solid Wood Office Storage Bookcase with Decorative Lattice Grille Doors Specifications

供应商与现货