纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	2400 × 450 × 2000 mm
Carcass Panel Thickness	25 mm
Back Panel Thickness	9 mm
Door / Drawer Front Thickness	22 mm
Shelf Thickness	25 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

net weight	165 kg
Recommended total static load	180 kg
Per-open-shelf load	20 kg
Per-drawer load	15 kg
Per-lower-cabinet-shelf load	25 kg
Recommended wall anchoring force	1.5 kN
Drawer and door cycle reference	50,000 cycles
Intended users	1 to 3 people
Shelf Distributed Load	30 kg/shelf
Drawer Slide Load / Life	45 kg/pair; 50000 cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Outer cabinet frame	Matte ivory lacquered wood-composite panels with 35 mm visible side thickness
Recessed back panel	Charcoal matte board with segmented panel seams
Lower cabinet doors	Walnut-veneer or walnut-look engineered wood with vertical grain
Open display shelves	Walnut-finish engineered wood or veneered board at 25 mm thickness
Drawer fronts	Quilted ivory upholstered or embossed composite panels with dark horizontal pulls
Drawer body	18 mm melamine-faced moisture-resistant composite board
Interior shelf boards	18 mm laminated composite board with edge banding
Top and perimeter trim	Dark matte rigid edge banding or painted metal profile
Drawer slides	Side-mounted full-extension steel runners with soft-close damping
Door hinges or tracks	Concealed steel hinges with integrated soft-close dampers
Base plinth	Matte dark composite or metal recessed plinth
Assembly hardware	Zinc-plated steel cam bolts, dowels and wall-anchor brackets

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Drawer storage function	Three vertically stacked drawers provide 660 mm of divided front storage for documents, media or personal items
Drawer extension	Full-extension slides provide 450 mm travel, with 45 kg pair rating and self-retracting soft close
Lower cabinet access	Three hinged doors open 105 degrees and conceal one adjustable shelf per bay
Open display function	Two staggered shelves create separate left and right display zones with 20 kg capacity per shelf
Adjustable shelf planning	Interior cabinet shelves use 32 mm pitch holes and support 25 kg per shelf
Soft-close operation	Doors and drawers close with damper-controlled final travel of 45 mm
Tip-over restraint	Two metal anti-tip brackets secure the rear top rail to wall studs or equivalent anchors
Leveling adjustment	Four concealed adjustable feet provide 12 mm vertical leveling range behind the plinth
Cable management option	Back panel can be fitted with one 60 mm grommet per open bay for AV or lighting cables
Module configuration	Left drawer tower and right door cabinet form one aligned wall unit with continuous top and base framing
Cable / Vent Opening Reference	If fitted, 80 mm diameter

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 700× 350 mm/carton according to carcass split
Reference Packaged Gross Weight	100 kg/set in 3 cartons
Reference Packaging Volume	0.65 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Executive office storage wall	Place behind a desk or alongside a meeting zone for files, display objects and concealed office materials
Upscale bedroom dressing area	Use the three soft-front drawers for clothing and the door cabinets for folded items or luggage accessories
Hotel suite or lounge	Install as a minibar, wardrobe supplement or guest amenity wall with open display lighting potential
Reception display zone	Store documents below and place awards, samples or decorative objects on staggered shelves
Study or library room	Use lower doors for books and archives and upper shelves for frequently referenced materials
Shared executive lounge	Suitable for 1 to 3 regular users needing both concealed and open organization
Installation condition	Locate against a reinforced wall and anchor at two upper rear points before loading drawers

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 16121 storage furniture safety reference	Specify EN 16121 requirements for strength, durability and stability of non-domical storage furniture
EN 14749 structural reference	Reference EN 14749 for storage units and worktops used in domestic and contract environments
EN 15185 abrasion reference	Use EN 15185 abrasion testing for horizontal laminate and veneered surfaces
EN 717-1 emissions reference	Request E1 classification under EN 717for wood-based panel formaldehyde release

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

北美市场选型与验收参考	ANSI/BIFMA X5.9 办公储物单元

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324 dimensional and workmanship reference	Apply GB/T 3324 general technical requirements for wooden furniture dimensions, tolerances and workmanship
GB/T 3325 durability reference	Use GB/T 3325 test methods for wooden furniture strength, stability and durability
GB 18580 emissions reference	Recommended references: GB 18580
GB/T 10357.4 wall cabinet reference	Use GB/T 103557.4 cabinet strength and stability test principles where applicable

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324 dimensional and workmanship reference：Apply GB/T 3324 general technical requirements for wooden furniture dimensions, tolerances and workmanship；
2. GB/T 3325 durability reference：Use GB/T 3325 test methods for wooden furniture strength, stability and durability；
3. GB 18580 emissions reference：Recommended references: GB 18580；
4. GB/T 10357.4 wall cabinet reference：Use GB/T 103557.4 cabinet strength and stability test principles where applicable；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · SWC-2400-CMB-01

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · SWC-2400-CMB-01

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · SWC-2400-CMB-01打开导出工具

页面快速操作

发布采购询价

产品描述

The Modern Combination Storage Wall with Drawers, Doors and Open Shelves, model SWC-2400-CMB-01, is a freestanding mixed-material storage cabinet designed to combine concealed storage, drawer organization, and open display within a structured wall-like composition. It is offered as an unbranded piece suited to interiors where a modern, tailored storage wall is desired without a fully built-in installation. Visually, the cabinet balances a matte ivory outer frame with a recessed charcoal back panel, segmented panel seams, walnut-veneered or walnut-look lower doors and shelves, and quilted ivory drawer fronts. Dark horizontal pulls, dark perimeter trim, and concealed hardware reinforce the clean, layered appearance. Two staggered open shelves form separate left and right display zones, while three vertically stacked drawers and three lower hinged doors create an orderly lower storage section. Construction uses 25 mm cabinet and shelf panels, a 9 mm back panel, and 22 mm door and drawer fronts. The visible side thickness is 35 mm. Drawer bodies are made from 18 mm melamine-faced, moisture-resistant composite board, while interior shelves use 18 mm laminated composite board with edge banding. Side-mounted full-extension steel runners provide a 450 mm travel, a 45 kg pair rating, and soft-close damping. Doors and drawers share damper-controlled closing action, with the doors opening to 105 degrees for access to one adjustable shelf per bay. The interior shelf positions use 32 mm pitch holes. The open shelves support display objects at 20 kg per shelf, lower cabinet shelves are rated for 25 kg each, drawers are rated for 15 kg each, and the recommended total static load is 180 kg. The drawers provide divided front storage for documents, media, clothing, or personal items, while the door cabinets accommodate archives, folded goods, luggage accessories, or other materials intended to remain out of view. A 50,000-cycle reference is provided for drawer and door operation. This storage wall is appropriate behind an executive desk, beside a meeting area, in an upscale bedroom dressing zone, or within a hotel suite or lounge. It also works in reception areas for awards and samples, in studies or libraries for books and reference materials, and in shared executive lounges serving up to three regular users. Procurement planning should account for a net weight of 165 kg and the need to secure the rear top rail with the two included-style metal anti-tip brackets to wall studs or equivalent anchors; the recommended wall anchoring force is 1.5 kN. Freight handling should be confirmed against the supplied packing records, which list carton splits and packaged weights. Installation time is referenced at 40 minutes per set.

Modern Combination Storage Wall with Drawers, Doors and Open Shelves Specifications

供应商与现货