| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall external dimensions | 1890 x 2150 x 1050 mm | |
|---|---|---|
| Compatible mattress size | 1800 x 2000 mm | |
| Headboard total height | 1050 mm | |
| Headboard panel thickness | 25 mm | |
| Sleeping surface height (with mattress) | 550 mm | |
| Under-bed storage compartment height | 400 mm | |
| Floor clearance under frame | 25 mm | |
| Slat dimensions | 1830 x 60 x 15 mm | |
| Slat spacing | 70 mm | |
| Total slat count | 18 | |
| Center support rail count | 3 | |
| Integrated support leg height | 25 mm | |
| Side Rail Thickness | 40 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
| Total bed frame static load capacity | 800 kg | |
|---|---|---|
| Maximum recommended mattress weight | 55 kg | |
| Lift mechanism open angle | 45 degrees | |
| Hydraulic strut rated cycle life | 10000 open/close cycles | |
| Storage compartment total volume | 680 L | |
| Net product weight | 80 kg | |
| Assembly time (two-person) | 60 minutes | |
| Bed Static Load Reference | 400 kg | |
| Per-slat Load Reference | 60 kg | |
| Recommended Procurement Warranty | Frame 10 years; hardware 5 years; upholstery 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Bed frame and side panels | 18mm thick rubberwood veneered MDF with matte natural finish | |
|---|---|---|
| Headboard frame | 25mm thick solid pine wood with rounded edge trim | |
| Headboard geometric inlay | 8mm thick off-white painted MDF chevron inserts | |
| Mattress support slats | 15mm thick multi-layer plywood with sanded smooth surface | |
| Lift mechanism hardware | 2mm thick black powder-coated steel frame with gas struts | |
| Integrated support legs | Solid rubberwood with natural matte finish, tapered profile | |
| Internal storage dividers | 12mm thick plywood partitions separating three storage zones | |
| Joinery hardware | Zinc-plated cam bolts and wood screws with dowel alignment | |
| Surface finish | Low-VOC matte clear lacquer, abrasion resistance 1000 cycles | |
| Slat Thickness | 15 mm bent plywood or solid timber | |
| Primary Connector Specification | Reference M8-M10 bolts with at least 2 fixing points per corner | |
| Reference Finish / Color Count | Recommended 6timber/upholstery options |
Adjustment / rotation / tilt / mobility / storage features
| Foot-end hydraulic lift operation | Gas struts assist lifting slat platform to 45 degrees, soft-close lowering prevents slamming | |
|---|---|---|
| Divided under-bed storage | Three separate compartment zones hold folded bedding, linens, and off-season clothing | |
| No box spring required | Plywood slat base provides direct support for all standard 300 mm thick mattresses | |
| Mattress anti-slide stop | 100mm high lip at head of slat platform prevents mattress shift during lift | |
| Wall-aligned headboard design | Flat rear headboard panel sits flush against wall with no gap | |
| Integrated leg floor protection | Felt pads pre-installed on leg bases prevent hardwood floor scratches | |
| Flat-pack assembly | Pre-drilled panels with included hex key and hardware for home assembly | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| Small urban master bedrooms | High-capacity storage eliminates need for separate dressers in compact spaces | |
|---|---|---|
| Nordic or Scandinavian style interiors | Light natural wood finish and geometric accent matches light neutral palettes | |
| Guest bedrooms with dual storage needs | Stores extra linens and guest supplies while providing standard sleeping surface | |
| Apartment dwellers with limited closet space | Under-bed storage holds off-season clothing and luggage without occupying floor space | |
| Teen or young adult bedrooms | Low-profile design and durable frame support daily long-term residential use |
EU Market Access Requirements* EN Standards
| EN 1725:1998 | Domestic furniture - Beds and mattresses - Safety requirements and test methods | |
|---|---|---|
| EN 12521:2015 | Furniture - Strength, durability and safety for domestic seating and beds |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to frame strength and finish quality | |
|---|---|---|
| GB 18584-2001 | Limit of harmful substances in wooden furniture, applicable to formaldehyde emission testing | |
| GB/T 10357.6-2013 | Furniture mechanical test for bed strength and durability, applicable to static load testing |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to frame strength and finish quality; 2. GB 18584-2001: Limit of harmful substances in wooden furniture, applicable to formaldehyde emission testing; 3. GB/T 10357.6-2013: Furniture mechanical test for bed strength and durability, applicable to static load testing; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
