| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1580 x 2080 x 1000 mm | |
|---|---|---|
| Side Rail Thickness | 40 mm | |
| Slat Spacing | 80 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
| Total frame weight | 55 kg | |
|---|---|---|
| Total static load capacity | 350 kg | |
| Under-bed storage capacity | 0.64 cubic meters | |
| Recommended mattress thickness | 250 mm | |
| Single slat static load rating | 50 kg | |
| Frame joint durability | 10000 load cycles | |
| Bed Static Load Reference | 400 kg | |
| Per-slat Load Reference | 60 kg | |
| Recommended Procurement Warranty | Frame 10 years; hardware 5 years; upholstery 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Headboard panels | Solid natural oak with matte clear water-based finish | |
|---|---|---|
| Side rails and foot rail | Solid natural oak, 25mm thickness | |
| Support legs | Solid oak, tapered square profile, 65mm top cross-section | |
| Mattress support slats | Solid poplar slats, 20mm thickness, spaced 70mm apart | |
| Connection hardware | Zinc-plated steel bolts and barrel nuts | |
| Frame corner joints | Mortise and tenon wood joints reinforced with steel hardware | |
| Surface finish | Low-VOC matte clear lacquer, 0.1mm coating thickness | |
| Slat Thickness | 15 mm bent plywood or solid timber | |
| Primary Connector Specification | Reference M8-M10 bolts with at least 2 fixing points per corner | |
| Reference Finish / Color Count | Recommended 6timber/upholstery options |
Adjustment / rotation / tilt / mobility / storage features
| Mattress support | Slatted wood base eliminates requirement for separate box spring | |
|---|---|---|
| Assembly method | Knockdown assembly with included hex key, no specialized tools required | |
| Headboard function | Two-panel solid wood headboard provides back support for seated reading in bed | |
| Under-bed access | 200mm clearance allows standard under-bed storage bins to fit below frame | |
| Structural stability | Four tapered legs with wide floor contact prevent wobble on hard or carpeted floors | |
| Mattress retention | Raised side rail lip prevents mattress from sliding during regular use | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| Primary use case | Residential master or guest bedrooms for daily sleeping use | |
|---|---|---|
| Style compatibility | Scandinavian, minimalist, or Japanese-inspired interior design schemes | |
| Recommended pairing | Matching solid wood nightstands and low-profile bedroom dressers from the same product line | |
| Floor compatibility | Suitable for hardwood, laminate, or carpeted bedroom floors with attached floor protection pads on legs | |
| User suitability | Adult users weighing up to 160kg per person, standard residential use case | |
| Maintenance requirement | Dry or slightly damp cloth cleaning for wood surfaces, no abrasive cleaners required |
EU Market Access Requirements* EN Standards
| EN 1725:1998 | Applicable standard for safety and strength requirements for domestic beds | |
|---|---|---|
| EN 71-3:2019 | Applicable standard for migration of certain elements if used in children’s adjacent spaces |
Standards applicable to China-market projects
| GB/T 3324-2017 | Applicable standard for general technical requirements of wooden furniture for residential use | |
|---|---|---|
| GB 18584-2001 | Applicable standard for formaldehyde emission limits for wood-based interior furniture |
This product must meet the following technical requirements: 1. GB/T 3324-2017: Applicable standard for general technical requirements of wooden furniture for residential use; 2. GB 18584-2001: Applicable standard for formaldehyde emission limits for wood-based interior furniture; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
