Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	1830 × 2150 × 960 mm
mattress compatibility	1800 x 2000 mm
headboard panel height	960 mm
sleeping surface height	350 mm
under-bed clearance	305 mm
headboard panel thickness	30 mm
side rail thickness	25 mm
support leg cross-section	80 x 80 mm
slat thickness	15 mm
slat width	60 mm
slat gap spacing	40 mm
center support rail count	1
center support leg count	3
Slat Spacing	80 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

net weight	37 kg
total static load capacity	300 kg
recommended mattress thickness	220 mm
slat system static load	250 kg
mattress slip resistance	Yes
finish abrasion resistance	Grade 2
warranty period	3 years
available color options	1
Bed Static Load Reference	400 kg
Per-slat Load Reference	60 kg

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

headboard panel	Solid oak finger-jointed panel, natural matte clear lacquer
bed side rails	Solid oak frame, same finish as headboard
support legs	Solid oak block legs, squared profile, floor-protecting felt pads
support slats	Solid pine or oak wood slats, sanded smooth, unfinished
center support beam	Solid wood longitudinal beam, metal screw connected to side rails
connecting hardware	Zinc-plated steel bolts, barrel nuts, and pre-drilled assembly points
surface finish	Water-based matte clear lacquer, low VOC, natural wood tone
floor protection pads	Felt pads affixed to bottom of all legs to prevent floor scratching
Slat Thickness	15 mm bent plywood or solid timber
Primary Connector Specification	Reference M8-M10 bolts with at least 2 fixing points per corner
Reference Finish / Color Count	Recommended 6timber/upholstery options

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

box spring requirement	No box spring required
assembly requirement	Knockdown assembly required, included hex key and hardware
under-bed storage access	Full open access on all four sides between support legs
headboard mounting	Pre-drilled bolt-on headboard fixed directly to side rail ends
mattress retention	Raised 20mm lip along side and head rails
structural stability	Three additional center support legs eliminate frame flex
noise reduction	Pre-installed buffer pads between slats and frame rails
compatibility	Fits standard 1800x2000mm mattresses without custom sizing
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2300× 900× 450 mm/carton in 4 cartons
Reference Packaged Gross Weight	130 kg/set
Reference Packaging Volume	0.9 m³/set

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

residential master bedroom	Suitable for 18sqm modern or Nordic style master bedrooms
guest bedroom furnishing	Durable solid wood construction suitable for frequent guest use
apartment and small space use	Open under-bed clearance adds functional storage without extra furniture
matching furniture sets	Pairs with matching light oak nightstands and dressers for coordinated bedroom sets
mattress showroom display	Neutral natural wood finish showcases mattress products without visual distraction
rental property furnishing	Sturdy solid wood construction withstands repeated assembly and tenant use

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 1725:1998	Domestic furniture - Beds and mattresses - Safety requirements, applicable for structural strength
EN 747-1:2012	Furniture - Beds and mattresses - Test methods for strength and durability
EN 12521:2015	Furniture - Strength, durability and safety requirements for domestic seating and beds

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements for wooden furniture, applicable for structural safety
GB 18584-2001	Limit of harmful substances in wood furniture, applicable for formaldehyde emission
GB/T 4893.4-2013	Surface abrasion resistance test for furniture finishes, applicable for lacquer durability

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for structural safety;
2. GB 18584-2001: Limit of harmful substances in wood furniture, applicable for formaldehyde emission;
3. GB/T 4893.4-2013: Surface abrasion resistance test for furniture finishes, applicable for lacquer durability;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · LB-OAK-Q-001

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · LB-OAK-Q-001

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · LB-OAK-Q-001Open Export Tool

Quick Actions

Post an RFQ

Product Description

The Light Oak Solid Wood Low-Profile Platform Bed with Wide Panel Headboard (Queen Size, Model LB-OAK-Q-001) features a streamlined Nordic minimalist design, with no footboard to maintain an open, uncluttered visual silhouette. Its wide, solid oak finger-jointed panel headboard sits 960mm tall, matched with low-profile side rails set to deliver a 350mm sleeping surface height, creating a grounded, relaxed layout that feels balanced in residential bedroom settings. Built entirely with solid wood framing, the bed uses solid oak for its headboard, side rails, and 80x80mm squared block support legs, all finished with a low-VOC water-based natural matte clear lacquer that highlights the wood’s natural grain while offering Grade 2 abrasion resistance. The support system includes 15mm thick sanded smooth slats cut from solid pine or oak, paired with a longitudinal solid wood center beam secured to side rails with zinc-plated steel bolts and barrel nuts at pre-drilled assembly points. Three additional center support legs eliminate frame flex, while pre-installed buffer pads between slats and rails reduce operational noise, and felt pads affixed to all leg bases prevent floor scratching. Designed for practical daily use, the bed does not require a box spring, supporting mattresses sized 1800x2000mm with a recommended 220mm thickness. A 20mm raised lip along side and head rails prevents mattress slippage, and 305mm of open under-bed clearance across all four sides allows easy access to stored items without enclosing storage compartments. All required hardware and a hex key are included for knockdown assembly, which takes 40 minutes to complete; the frame withstands repeated assembly and disassembly without structural compromise. The bed holds a total static load capacity of 300kg, with the slat system supporting 250kg, and is covered by a 3-year warranty. This platform bed suits 18sqm modern or Nordic-style master bedrooms, durable enough for frequent use in guest rooms and rental properties. Its low-profile frame works well in apartments and small spaces by leveraging under-bed space instead of requiring additional storage furniture, and its neutral natural finish makes it suitable for mattress showroom display. It pairs seamlessly with matching light oak nightstands and dressers for coordinated room sets. When procuring, note that each unit ships across multiple cartons with a total packaged gross weight of 130kg and 0.9m³ packaging volume, and plan for on-site assembly upon delivery.

Light Oak Solid Wood Low-Profile Platform Bed with Wide Panel Headboard, Queen Size Specifications

Suppliers and stock