| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1717 x 2197 x 1107 mm | |
|---|---|---|
| Inner mattress fit area | 1524 x 2032 mm | |
| Headboard dimensions | 1651 x 65 x 1000 mm | |
| Sleeping surface height from floor | 340 mm | |
| Underbed clearance | 267 mm | |
| Side rail thickness | 30 mm | |
| Headboard padding thickness | 65 mm | |
| Leg height | 267 mm | |
| Foot end rail height | 250 mm | |
| Slat width | 70 mm | |
| Slat spacing gap | 76 mm | |
| Slat Spacing | 80 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
| Static total load capacity | 363 kg | |
|---|---|---|
| Recommended mattress thickness | 305 mm | |
| Slat support count | 13 | |
| Center support leg count | 4 | |
| Net product weight | 47 kg | |
| Fabric upholstery abrasion resistance | 30000 double rubs | |
| Foam padding density | 32 kg/m³ | |
| Bed Static Load Reference | 400 kg | |
| Per-slat Load Reference | 60 kg | |
| Recommended Procurement Warranty | Frame 10 years; hardware 5 years; upholstery 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Bed frame and legs | Solid rubberwood with light oak matte finish | |
|---|---|---|
| Internal support structure | LVL engineered wood slats and cross beams | |
| Headboard upholstery | 100% polyester linen-look off-white fabric | |
| Headboard padding | High-resilience polyurethane foam | |
| Hardware connectors | Zinc-plated steel bolts and barrel nuts | |
| Frame surface finish | Low-VOC water-based clear lacquer | |
| Tufting fasteners | Matching fabric-covered buttons | |
| Center support brackets | 1.5mm thick powder-coated steel | |
| Slat Thickness | 15 mm bent plywood or solid timber | |
| Primary Connector Specification | Reference M8-M10 bolts with at least 2 fixing points per corner | |
| Reference Finish / Color Count | Recommended 6timber/upholstery options |
Adjustment / rotation / tilt / mobility / storage features
| Mattress support system | Wood slat platform eliminates requirement for box spring | |
|---|---|---|
| Underbed storage access | Open 267mm clearance for under-bed storage bins and footwear | |
| Headboard installation | Bolt-on attachment to side rails with pre-drilled mounting holes | |
| Assembly requirement | Knock-down assembly with included hex key and hardware | |
| Mattress retention | Recessed side rail lip prevents mattress sliding off platform | |
| Noise reduction design | Felt pads between slats and frame eliminate squeaking during use | |
| Headboard tufted design | Grid-pattern button tufting creates segmented padded panels | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Shipping carton dimensions | 2240 x 460 x 180 mm (largest carton) | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| Residential master bedroom | Suitable for queen size bedrooms with Scandinavian or mid-century modern decor | |
|---|---|---|
| Small urban apartment | Low-profile design creates visual openness without occupying excessive vertical space | |
| Guest bedroom furnishing | Neutral off-white and light oak finish matches varied guest room color schemes | |
| Studio apartment flexible layout | Open underbed storage maximizes usable floor space in compact units | |
| Pairing recommendation | Matches light wood two-drawer nightstands for coordinated bedroom set | |
| User suitability | Ideal for adult users preferring firm mattress support without box spring |
EU Market Access Requirements* EN Standards
| EN 1725:1998 | Domestic furniture - Beds and mattresses - Safety requirements and test methods | |
|---|---|---|
| EN 1022:2005 | Domestic furniture - Seating - Determination of stability, applicable to edge load testing |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to frame structural stability | |
|---|---|---|
| GB 18584-2001 | Indoor decorating and refurbishing materials limit of harmful substances for wooden furniture | |
| GB/T 1952.2-2011 | General technical requirements for upholstered furniture, applicable to upholstered headboard |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to frame structural stability; 2. GB 18584-2001: Indoor decorating and refurbishing materials limit of harmful substances for wooden furniture; 3. GB/T 1952.2-2011: General technical requirements for upholstered furniture, applicable to upholstered headboard; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
