| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions (mattress 1800×2000mm) | 2270 x 1900 x 1100 mm | |
|---|---|---|
| Compatible mattress size | 1800 x 2000 mm | |
| Headboard integrated shelf depth | 80 mm | |
| Platform support height from floor | 300 mm | |
| Footboard height from floor | 350 mm | |
| Under-bed clearance height | 200 mm | |
| Single nightstand dimensions | 500 x 400 x 500 mm | |
| Individual slat dimensions | 60 mm wide, 15 mm thick | |
| Slat spacing gap | 40 mm | |
| Headboard upholstered panel thickness | 50 mm | |
| Side Rail Thickness | 40 mm | |
| Slat Spacing | 80 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
| Total bed frame static load capacity | 500 kg | |
|---|---|---|
| Headboard cushion durability (compression cycles) | 80000 | |
| Recommended mattress thickness | 250 mm | |
| Total packaged weight (bed + 2 nightstands) | 130 kg | |
| Recommended maximum user weight per side | 150 kg | |
| Standard frame warranty period | 3 years | |
| Bed Static Load Reference | 400 kg | |
| Per-slat Load Reference | 60 kg | |
| Recommended Procurement Warranty | Frame 10 years; hardware 5 years; upholstery 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Main bed frame material | Solid natural oak wood with matte eco-friendly lacquer finish | |
|---|---|---|
| Support slats | Kiln-dried New Zealand pine wood | |
| Headboard upholstery covering | Soft, wear-resistant linen-cotton blend fabric | |
| Headboard cushion core | 35kg/m³ high-density polyurethane foam | |
| Structural support legs | Solid oak wood, 60mm square cross-section | |
| Connection hardware | Zinc-plated steel bolts and corner brackets | |
| Nightstand construction | Solid oak frame and drawer fronts, pine drawer boxes | |
| Drawer slides | 3-section silent ball-bearing slides | |
| Slat Thickness | 15 mm bent plywood or solid timber | |
| Primary Connector Specification | Reference M8-M10 bolts with at least 2 fixing points per corner | |
| Reference Finish / Color Count | Recommended 6timber/upholstery options |
Adjustment / rotation / tilt / mobility / storage features
| Headboard open storage shelf | Full-width open shelf for storing small items like alarm clocks, books, and decor | |
|---|---|---|
| Upholstered split headboard | Two separate padded backrest panels for independent back support when sitting upright | |
| Slatted support system | Evenly spaced pine slats with central support beam for even mattress weight distribution | |
| Nightstand drawer storage | Two full-extension drawers per nightstand for bedside personal item storage | |
| Noise-reduction design | Felt pads at all slat and frame contact points to minimize squeaking during use | |
| Knock-down assembly | Flat-pack design with included hardware and assembly instructions for on-site installation | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| Primary application space | Master and guest bedrooms in residential apartments and homes | |
|---|---|---|
| Target user group | Adult users preferring minimalist Nordic natural wood style interiors | |
| Recommended supporting furniture | Matching 2-drawer nightstands, latex or spring mattresses 250 mm thick, bedroom wardrobes in matching oak finish | |
| Space size requirement | Minimum bedroom width 2900mm to accommodate bed plus 500mm nightstands on both sides | |
| Usage scenario | Daily sleep, upright sitting for reading or screen use in bed supported by padded headboard | |
| Cleaning compatibility | 200mm under-bed clearance supports access for most robot vacuum cleaners |
EU Market Access Requirements* EN Standards
| EN 1725:1998 | Domestic furniture - Beds and mattresses - Safety requirements and test methods, applicable for structural safety | |
|---|---|---|
| EN 1022:2005 | Domestic furniture - Seating and beds - Determination of stability, applicable for frame tilt stability | |
| EN 13986:2004 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking, applicable for panel components |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for frame structural integrity | |
|---|---|---|
| GB 18584-2001 | Limit of harmful substances in wooden furniture, applicable for formaldehyde emission control | |
| GB/T 1952.2-2011 | Technical requirements for upholstered furniture mattresses and bed soft parts, applicable for headboard padding |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for frame structural integrity; 2. GB 18584-2001: Limit of harmful substances in wooden furniture, applicable for formaldehyde emission control; 3. GB/T 1952.2-2011: Technical requirements for upholstered furniture mattresses and bed soft parts, applicable for headboard padding; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
