Light Natural Wood Freestanding Two-Door Hinged Wardrobe with Mixed Hanging and Shelf Storage (model WD-LT2D-MIX-2000) is listed under Apartment Wardrobe. Dimensions: 980 × 570 × 2000 mm. Materials: 18mm thick wood-based panel with light natural oak veneer/foil finish. Load capacity: 15 kg. Product Features: Freestanding,Hinged,doors,Mixed,storage,Light,wood,finish,Raised,leg,base. This page consolidates 6 groups of specifications and GB / EN standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Brand | Zhenxi Muye | Model | WD-LT2D-MIX-2000 |
| Overall dimensions (W × D × H) | 980 × 570 × 2000 mm | Overall assembled dimensions | 980 x 570 x 2000 mm |
| Under-cabinet floor clearance | 200 mm | Top enclosed shelf compartment height | 350 mm |
| Full-height hanging compartment width | 480 mm | Right-side stacked shelf compartment width | 450 mm |
| Right-side shelf tier spacing | 360 mm | Right-side fixed shelf count | 3 units |
| Hanging rail height above base shelf | 1350 mm | Main frame panel thickness | 18 mm |
| Back panel thickness | 9 mm | Door panel thickness | 18 mm |
| Side Rail Thickness | 40 mm | Slat Spacing | 80 mm |
| Center Support Leg Count | Recommended 6legs | Total product net weight | 80 kg |
| Hanging rod static load capacity | 15 kg | Recommended maximum total storage load | 120 kg |
| Hanging compartment capacity | 30 standard adult shirts/hangers | Anti-tip wall anchor load rating | 50 kg |
| Door hinge cycle durability | 10000 open/close cycles | Recommended warranty period | 3 years |
| Bed Static Load Reference | 400 kg | Per-slat Load Reference | 60 kg |
| Recommended Procurement Warranty | Frame 10 years; hardware 5 years; upholstery 2 years | Exterior frame and door panels | 18mm thick wood-based panel with light natural oak veneer/foil finish |
| Interior cavity lining | Smooth darker brown wood-effect laminate finish | Support legs | Solid natural wood tapered angled legs with matte clear sealant |
| Hanging rod | 25mm diameter chrome-plated steel tube with anti-slip end caps | Door hinges | 304 stainless steel concealed soft-close hinges, 2 per door |
| Fixed internal shelves | 18mm thick wood-based panel matching interior laminate finish | Back panel | 9mm thick hardboard with moisture-resistant sealant |
| Door handles | Recessed integrated long pull handles matching exterior wood finish | Internal shelf brackets | Zinc-plated steel support brackets fastened to side panels |
| Slat Thickness | 15 mm bent plywood or solid timber | Primary Connector Specification | Reference M8-M10 bolts with at least 2 fixing points per corner |
| Reference Finish / Color Count | Recommended 6timber/upholstery options | Door operation | Two outward-opening hinged doors swing 110 degrees for full compartment access |
| Hanging storage | Full-height hanging zone supports long garments, dresses, coats and short tops on standard hangers | Shelf storage | Right-side 4-tier open shelving holds folded clothing, pillows, bags and soft goods |
| Top compartment storage | Enclosed upper shelf stores out-of-season bedding, quilts and bulky items | Base shelf storage | Lower open shelf under hanging zone holds storage boxes and footwear accessories |
| Anti-tip safety | Included wall anchor kit secures unit to wall to prevent tip-over when doors are open | Floor clearance access | 200mm under-cabinet gap allows robotic vacuum and cleaning tool access below unit |
| Door closure | Concealed hinges hold doors closed without external latches for clean minimalist aesthetic | Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
| Reference Package Count | 1 set / 2 cartons | Reference Assembly Time | 40 minutes per set |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | Reference Packaged Gross Weight | 130 kg/set |
| Reference Packaging Volume | 0.9 m³/set | Primary application space | Residential master or guest bedroom, sized for compact to medium room layouts |
| Target user | Adult users needing mixed hanging and folded clothing storage without built-in closets | Complementary furniture match | Pairs with light wood bed frames, nightstands and tapered leg dressers for cohesive minimalist interiors |
| Placement consideration | Position against solid wall for anti-tip anchor installation, keep 50mm gap from wall for door swing | Secondary use case | Studio apartment or rental property freestanding storage for clothing and household textiles |
| Recommended room size minimum | 10 sqm bedrooms, allows full door opening and walking clearance around unit | Care and maintenance | Wipe exterior with dry or lightly damp cloth, avoid liquid pooling on interior shelves |
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 980 × 570 × 2000 mm | |
|---|---|---|
| Overall assembled dimensions | 980 x 570 x 2000 mm | |
| Under-cabinet floor clearance | 200 mm | |
| Top enclosed shelf compartment height | 350 mm | |
| Full-height hanging compartment width | 480 mm | |
| Right-side stacked shelf compartment width | 450 mm | |
| Right-side shelf tier spacing | 360 mm | |
| Right-side fixed shelf count | 3 units | |
| Hanging rail height above base shelf | 1350 mm | |
| Main frame panel thickness | 18 mm | |
| Back panel thickness | 9 mm | |
| Door panel thickness | 18 mm | |
| Side Rail Thickness | 40 mm | |
| Slat Spacing | 80 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Total product net weight | 80 kg | |
|---|---|---|
| Hanging rod static load capacity | 15 kg | |
| Recommended maximum total storage load | 120 kg | |
| Hanging compartment capacity | 30 standard adult shirts/hangers | |
| Anti-tip wall anchor load rating | 50 kg | |
| Door hinge cycle durability | 10000 open/close cycles | |
| Recommended warranty period | 3 years | |
| Bed Static Load Reference | 400 kg | |
| Per-slat Load Reference | 60 kg | |
| Recommended Procurement Warranty | Frame 10 years; hardware 5 years; upholstery 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Exterior frame and door panels | 18mm thick wood-based panel with light natural oak veneer/foil finish | |
|---|---|---|
| Interior cavity lining | Smooth darker brown wood-effect laminate finish | |
| Support legs | Solid natural wood tapered angled legs with matte clear sealant | |
| Hanging rod | 25mm diameter chrome-plated steel tube with anti-slip end caps | |
| Door hinges | 304 stainless steel concealed soft-close hinges, 2 per door | |
| Fixed internal shelves | 18mm thick wood-based panel matching interior laminate finish | |
| Back panel | 9mm thick hardboard with moisture-resistant sealant | |
| Door handles | Recessed integrated long pull handles matching exterior wood finish | |
| Internal shelf brackets | Zinc-plated steel support brackets fastened to side panels | |
| Slat Thickness | 15 mm bent plywood or solid timber | |
| Primary Connector Specification | Reference M8-M10 bolts with at least 2 fixing points per corner | |
| Reference Finish / Color Count | Recommended 6timber/upholstery options |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Door operation | Two outward-opening hinged doors swing 110 degrees for full compartment access | |
|---|---|---|
| Hanging storage | Full-height hanging zone supports long garments, dresses, coats and short tops on standard hangers | |
| Shelf storage | Right-side 4-tier open shelving holds folded clothing, pillows, bags and soft goods | |
| Top compartment storage | Enclosed upper shelf stores out-of-season bedding, quilts and bulky items | |
| Base shelf storage | Lower open shelf under hanging zone holds storage boxes and footwear accessories | |
| Anti-tip safety | Included wall anchor kit secures unit to wall to prevent tip-over when doors are open | |
| Floor clearance access | 200mm under-cabinet gap allows robotic vacuum and cleaning tool access below unit | |
| Door closure | Concealed hinges hold doors closed without external latches for clean minimalist aesthetic | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Primary application space | Residential master or guest bedroom, sized for compact to medium room layouts | |
|---|---|---|
| Target user | Adult users needing mixed hanging and folded clothing storage without built-in closets | |
| Complementary furniture match | Pairs with light wood bed frames, nightstands and tapered leg dressers for cohesive minimalist interiors | |
| Placement consideration | Position against solid wall for anti-tip anchor installation, keep 50mm gap from wall for door swing | |
| Secondary use case | Studio apartment or rental property freestanding storage for clothing and household textiles | |
| Recommended room size minimum | 10 sqm bedrooms, allows full door opening and walking clearance around unit | |
| Care and maintenance | Wipe exterior with dry or lightly damp cloth, avoid liquid pooling on interior shelves |
EU Market Access Requirements* EN Standards
| EN 14749:2016 | Domestic and kitchen storage furniture safety requirements, including anti-tip stability testing | |
|---|---|---|
| EN 14073-2:2004 | Office storage furniture strength/durability reference, applicable for static load verification | |
| EN 13722:2004 | Furniture test methods for strength and durability of storage units | |
| EN 71-3:2019+A1:2021 | Migration of certain elements, applicable for low-VOC and material safety checks |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for structural and dimensional acceptance | |
|---|---|---|
| GB 18584-2001 | Limits of harmful substances in wooden furniture, required for indoor air quality compliance | |
| GB/T 4893.8-2013 | Surface abrasion resistance test for furniture finishes, applicable for wear durability verification |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for structural and dimensional acceptance; 2. GB 18584-2001: Limits of harmful substances in wooden furniture, required for indoor air quality compliance; 3. GB/T 4893.8-2013: Surface abrasion resistance test for furniture finishes, applicable for wear durability verification; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp