Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	1800 × 550 × 2030 mm
upper short hanging compartment clear height	1300 mm
lower trouser hanging compartment clear height	1000 mm
top bedding storage compartment height	500 mm
long coat hanging compartment clear height	1500 mm
integrated drawer internal dimensions	800 x 450 x 190 mm
folded clothing shelf vertical spacing	400 mm
hanging rail diameter	23 mm
integral base leg floor clearance	100 mm
carcass panel thickness	18 mm
back panel thickness	9 mm
edge band thickness	1 mm
hinge/drawer slide clearance	12 mm
anti-tip connector mounting height	1900 mm
Door / Drawer Front Thickness	22 mm
Shelf Thickness	25 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

total unit static load capacity	363 kg
product net weight	80 kg
recommended user count per unit	2 users
drawer slide cycle rating	50000 cycles
floor contact point count	4
Shelf Distributed Load	30 kg/shelf
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Angle / Life	165°; 80000 cycles
Anti-tip Fixing Reference	Products above 1200 mm should use at least 2 wall fixing points
Recommended Procurement Warranty	Carcass 5 years; hardware 3 years; finish 2 years

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

main carcass panels	18mm E1-grade laminated particleboard with light oak wood grain finish
unit back panel	9mm MDF hardboard backing matching light wood finish
hanging rods	23mm diameter powder-coated steel horizontal rails
integrated drawer front	18mm matching laminated engineered wood with recessed pull cutout
drawer slides	Cold-rolled steel side-mount drawer slides with zinc plating
integral support legs	18mm solid wood composite legs matching cabinet finish
shelf surfaces	18mm laminated engineered wood with 1mm PVC edge banding
anti-tip hardware	Steel wall anchor brackets with included mounting screws
drawer base panel	9mm MDF panel supporting stored items inside drawer
Edge Band Thickness	2 mm
Primary Connector Specification	Reference M6-M8 cam/bolt fittings with at least 2 fixing points at major joints
Reference Finish / Color Count	Recommended 6finish options

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

upper short hanging storage	Full-width steel rail holds short garments, shirts and blouses 1300 mm long
lower trouser hanging storage	Full-width steel rail holds trousers, pants and bottoms 1000 mm long
top bedding storage	Wide open top shelf holds folded duvets, pillows and seasonal bedding
long coat hanging storage	Dedicated rail holds long overcoats, dresses and outerwear up to 1500mm long
folded item open shelving	Four stacked right-side open shelves hold folded garments, accessories and storage boxes
integrated accessory drawer	Pull-out drawer stores socks, undergarments and small accessories with recessed pull
raised base design	100mm floor clearance enables robot vacuum and mop access under the unit
anti-tip wall anchoring	Included hardware secures top of unit to wall to prevent tipping under unbalanced load
Cable / Vent Opening Reference	If fitted, 80 mm diameter

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 700× 350 mm/carton according to carcass split
Reference Packaged Gross Weight	100 kg/set in 3 cartons
Reference Packaging Volume	0.65 m³/set

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

bedroom clothing storage	Suits master or secondary bedrooms for two-person daily clothing organization
walk-in closet built-in use	Fits as a modular component in custom walk-in closet layouts
apartment compact storage	Works in small urban apartments where closed-door units feel overly bulky
rental property furnishing	Suitable for furnished rental units requiring durable, easy-to-assemble storage
entryway coat storage	Can be placed in large entryways for outerwear, bag and accessory storage

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 14749:2016	Safety and performance requirements for domestic storage furniture
EN 312:2010	Particleboard performance specification for furniture panel use
EN 13986:2004+A1:2015	Wood-based panel formaldehyde emission Class E1 limit for indoor use

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to this wardrobe cabinet
GB 18580-2017	Formaldehyde emission limit for wood-based panels, E1 grade minimum for acceptance
GB/T 10357.5-2011	Furniture mechanical performance test for storage units, static load verification
GB/T 4897-2015	Particleboard specification, applicable to main carcass panel material verification

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to this wardrobe cabinet;
2. GB 18580-2017: Formaldehyde emission limit for wood-based panels, E1 grade minimum for acceptance;
3. GB/T 10357.5-2011: Furniture mechanical performance test for storage units, static load verification;
4. GB/T 4897-2015: Particleboard specification, applicable to main carcass panel material verification;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · OW-2BAY-1DRW-LW

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · OW-2BAY-1DRW-LW

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · OW-2BAY-1DRW-LWOpen Export Tool

Quick Actions

Post an RFQ

Product Description

This light wood freestanding open wardrobe balances minimalist modern styling with multi-zone, purpose-built clothing storage for residential and light commercial settings. Its unobtrusive open structure features a light natural oak wood grain finish that blends seamlessly with neutral, contemporary, or warm-toned interior palettes, with a clean layout that eliminates visual clutter from bulky closed door panels. Storage zones are arranged to cover every common clothing and linen need: a wide open top shelf sits at the highest point for folded duvets, pillows, and seasonal bedding, while three dedicated hanging compartments below accommodate long overcoats and dresses, short shirts and blouses, and trousers and bottoms respectively. The right side of the unit holds four stacked open shelves for folded garments, accessories, and storage boxes, paired with a single integrated pull-out drawer at the lower section for small items like socks and undergarments, fitted with a flush recessed pull that maintains the unit’s sleek lines. The unit sits on matching support legs with floor clearance that allows robot vacuum and mop access beneath the base. The wardrobe is constructed with durable, thoughtfully selected materials: main carcass panels, drawer fronts, support legs, and shelf surfaces use laminated engineered wood with a light oak finish, with shelves finished with smooth PVC edge banding. Hanging rails are powder-coated steel, paired with zinc-plated cold-rolled steel drawer slides for smooth operation, and steel anti-tip wall anchor hardware is included for secure installation. It is sized to support daily use for two users, with static load ratings distributed appropriately across shelves, hanging rails, and the integrated drawer to hold regular household storage volumes. This wardrobe fits a wide range of spaces: it works as primary clothing storage in master or secondary bedrooms, as a modular component in custom walk-in closet layouts, as compact storage for small urban apartments where closed cabinetry feels overly bulky, as durable easy-to-assemble furnishing for rental properties, and as outerwear and accessory storage in spacious entryways. For procurement, note that the unit ships across multiple cartons, with a straightforward assembly process suitable for on-site setup; all required anti-tip mounting hardware is included, and the unbranded design supports flexible integration with existing furnishing schemes without restrictive brand styling constraints.

Light Wood Freestanding Open Wardrobe with Multi-Zone Storage Specifications

Suppliers and stock