| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1800 x 550 x 780 mm | |
|---|---|---|
| Desktop thickness | 18 mm | |
| Per-seat desktop length | 600 mm | |
| Knee clearance height under desk | 750 mm | |
| Modesty panel height | 450 mm | |
| Floor mounting footplate size | 150 x 150 mm | |
| Steel leg tube wall thickness | 2 mm | |
| Wire basket depth under desk | 150 mm | |
| Edge trim radius | 5 mm | |
| Row spacing requirement for installation | 1200 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Total desktop static load capacity | 180 kg | |
|---|---|---|
| Unit net weight | 65 kg | |
| Formaldehyde emission limit for wood panels | 0.5 mg/L | |
| Surface abrasion resistance rating | 2000 cycles | |
| Minimum service life | 5 years | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Desktop core and finish | 18mm MDF core with wood-grain melamine laminate | |
|---|---|---|
| Desktop edge trim | 2mm light gray PVC edge banding with rounded corners | |
| Frame and leg assembly | Powder-coated dark green cold-rolled steel | |
| Floor footrest plates | Textured galvanized steel footplates with anti-slip ridges | |
| Front modesty panel | Wood-grain laminate panel secured in steel frame | |
| Under-desk storage basket | Black epoxy-coated steel wire mesh basket | |
| Frame surface treatment | Acid pickled, phosphated, electrostatic powder coated | |
| Anchor hardware | Galvanized steel expansion bolts for concrete floor mounting | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Mounting system | Permanent floor anchoring via 3 leg assemblies with bolted footplates | |
|---|---|---|
| Storage provision | Continuous front undermount wire basket for student books and supplies | |
| Privacy barrier | Full-height front modesty panel blocking leg visibility for seated users | |
| Ergonomic seating support | Curved cantilever legs providing unobstructed knee clearance for 3 users | |
| Surface utility | Slightly sloped melamine writing surface with stain and water resistance | |
| Foot support | Integrated ridged footrests at each leg base for seated student comfort | |
| Durability performance | Welded steel joints with no sharp edges, meeting school safety requirements | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| K-12 and university standard classrooms | Permanent row seating for lecture-based learning with integrated storage | |
|---|---|---|
| Training and examination halls | Fixed forward-facing seating for high-use formal assessment environments | |
| Multimedia teaching rooms | Sloped writing surface suitable for note-taking during projected presentations | |
| Vocational education facilities | Heavy-duty construction suitable for daily long-term student use | |
| Auditorium and lecture hall auxiliary seating | Fixed installation for tiered or flat-floor large-group learning spaces |
EU Market Access Requirements* EN Standards
| EN 1729-1:2015 | Applicable safety and strength requirements for educational furniture | |
|---|---|---|
| EN 1729-2:2012 | Applicable test methods for strength, durability and stability of school desks |
Standards applicable to China-market projects
| GB/T 3976-2014 | Applicable to sizing and functional dimensions for school desks and chairs | |
|---|---|---|
| GB 18580-2017 | Applicable formaldehyde emission limit for wood-based panel components | |
| GB/T 3324-2017 | Applicable general technical requirements for wooden furniture |
This product must meet the following technical requirements: 1. GB/T 3976-2014: Applicable to sizing and functional dimensions for school desks and chairs; 2. GB 18580-2017: Applicable formaldehyde emission limit for wood-based panel components; 3. GB/T 3324-2017: Applicable general technical requirements for wooden furniture; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
