| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall bed dimensions | 1980 x 2230 x 1220 mm | |
|---|---|---|
| Recommended mattress size | 1800 x 2000 mm | |
| Headboard height | 1220 mm | |
| Headboard wing projection | 115 mm beyond each side rail | |
| Side rail height | 330 mm from floor to top of upholstered rail | |
| Foot rail height | 330 mm from floor to top edge | |
| Exposed leg height | 150 mm | |
| Under-bed clearance | 115 mm under the side rail | |
| Slat support width | 1800 mm clear inside side rails | |
| Slat support length | 2000 mm clear between headboard and foot rail | |
| Platform side rail thickness | 35 mm upholstered finished thickness | |
| Mattress support height | 300 mm from floor to slat surface | |
| Nightstand dimensions | 530 x 410 x 510 mm | |
| Nightstand drawer count | 2 drawers | |
| Side Rail Thickness | 40 mm | |
| Slat Spacing | 80 mm |
Net weight / load capacity / users / durability
| Bed static load capacity | 454 kg | |
|---|---|---|
| Recommended occupant capacity | 2 adults | |
| Net weight | 59 kg | |
| Slat count | 14 slats | |
| Slat spacing | 80 mm clear gap | |
| Center support legs | 3 legs along one central rail | |
| Recommended mattress thickness | 457 mm | |
| Minimum mattress thickness for headboard support | 254 mm | |
| Perimeter rail static point load | 90 kg per rail section | |
| Nightstand top load | 25 kg |
Core acceptance fields · Panels / hardware / frame / upholstery
| Headboard upholstery | Matte gray woven-look fabric with padded face and vertical channel seams | |
|---|---|---|
| Headboard internal panel | 25 mm engineered-wood or kiln-dried hardwood frame panel | |
| Headboard foam | 20 mm polyurethane padding on face and wings | |
| Side and foot rails | Gray upholstered engineered-wood rails with 15 mm visible padding | |
| Support slats | 9 mm bentwood or laminated poplar slats in fabric-covered retainers | |
| Center support rail | Rectangular steel or hardwood center rail with floor legs | |
| Bed legs | 25 mm diameter black powder-coated metal tapered legs | |
| Mounting hardware | M8 blackened steel bolts, barrel nuts and corner brackets | |
| Nightstand exterior | Matching gray upholstered or laminated engineered-wood case | |
| Nightstand drawer slides | Side-mounted 35 mm two-section drawer slides | |
| Nightstand legs | Black powder-coated metal angled legs | |
| Nightstand handles | 128 mm centered black bar pulls |
Adjustment / rotation / tilt / mobility / storage features
| Platform support | 14 slats mount across the frame and support the mattress directly without a box spring | |
|---|---|---|
| Center beam support | One longitudinal center rail transfers load to 3 floor legs, reducing slat deflection | |
| Wingback enclosure | Curved side wings extend beyond the headboard face and visually contain pillows at both ends | |
| Channel-tufted headboard | Three padded vertical channels form the backrest face and maintain a smooth tailored surface | |
| Low-profile entry | 300 mm slat height and 330 mm rail height give a modern low seating height | |
| Knock-down assembly | Headboard, side rails, foot rail, slat rolls and legs bolt together for flat-pack shipping | |
| Noise control | Slat retainers and bolted corner joints are specified with EVA contact pads to reduce metal or wood movement | |
| Mattress retention | Upholstered side and foot rails contain the mattress perimeter and limit lateral sliding | |
| Under-bed access | 115 mm ground clearance permits robotic vacuum access and limited air circulation | |
| Nightstand storage | Two stacked drawers provide separate storage for bedside items and personal accessories | |
| Vertical seam headboard | Two seams divide the padded face into 3 vertical backrest panels | |
| Noise-reduction contact system | EVA pads isolate slats, corner brackets and leg plates to suppress frame movement noise |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| Main bedroom | Suitable for a 1800 mm two-adult mattress in homes or serviced apartments where wingback styling is required. | |
|---|---|---|
| Hotel guest room | Pairs a 454 kg static-load bed with a compact two-drawer nightstand for overnight guest storage. | |
| Modern residential suite | Low 300 mm platform height and gray woven finish fit contemporary gray or neutral interiors. | |
| Small bedside zone | 530 mm wide nightstand fits beside the wing without blocking room circulation or the bed leg. | |
| Robotic-vacuum household | 115 mm under-bed clearance supports routine cleaning under the upholstered rails. | |
| Knock-down furnishing project | Flat-pack 3-carton bed suits multi-unit delivery and on-site assembly in apartments. | |
| Reading-in-bed use | Padded 1220 mm headboard and side wings provide back and pillow support for two users. |
EU Market Access Requirements* EN Standards
| EN 1725:1998 | Domestic bedding safety, strength and durability requirements applicable to bedsteads. | |
|---|---|---|
| EN 12521:2015 | Furniture strength, durability and safety requirements for domestic beds. |
Standards applicable to China-market projects
| GB/T 3324-2024 | General technical requirements for wooden furniture, applicable to frame strength, dimensions and workmanship. | |
|---|---|---|
| GB/T 3325-2017 | Metal furniture general technical requirements, applicable to coated steel legs and support rails. | |
| GB 18584-2001 | Indoor decorative materials limit formaldehyde emission from wood-based furniture components. | |
| GB/T 10357.6-2013 | Furniture test for single-bed strength and durability, applicable to slats, rails and legs. | |
| GB/T 10357.7-2013 | Furniture stability testing, applicable to the free-standing platform frame. |
This product must meet the following technical requirements: 1. GB/T 3324-2024: General technical requirements for wooden furniture, applicable to frame strength, dimensions and workmanship.; 2. GB/T 3325-2017: Metal furniture general technical requirements, applicable to coated steel legs and support rails.; 3. GB 18584-2001: Indoor decorative materials limit formaldehyde emission from wood-based furniture components.; 4. GB/T 10357.6-2013: Furniture test for single-bed strength and durability, applicable to slats, rails and legs.; 5. GB/T 10357.7-2013: Furniture stability testing, applicable to the free-standing platform frame.; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
