| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| overall desk dimensions | 2600 x 2000 x 750 mm | |
|---|---|---|
| main desktop thickness | 25 mm | |
| modesty panel thickness | 16 mm | |
| side return width (each wing) | 600 mm | |
| knee clearance width | 1200 mm | |
| knee clearance height | 650 mm | |
| knee clearance depth | 600 mm | |
| desktop edge band thickness | 2 mm | |
| support column cross-section | 180 x 180 mm | |
| cable grommet diameter | 80 mm | |
| Finished Top Thickness | 50 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| desktop static load capacity | 120 kg | |
|---|---|---|
| drawer slide load rating (if fitted) | 45 kg | |
| drawer slide cycle rating | 50000 cycles | |
| hinge cycle rating (if fitted) | 80000 cycles | |
| surface abrasion resistance | 2000 cycles | |
| desk net weight range | 180 kg | |
| recommended maximum user weight at work surface | 150 kg | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| desktop substrate | E0-grade MDF/particle board core | |
|---|---|---|
| desktop finish | Matte dark grey melamine facing | |
| front modesty panel | Vertical ribbed off-white MDF with matching melamine finish | |
| corner support columns | Two-tone off-white and dark grey engineered wood with rounded edge trim | |
| edge banding | 2mm thick color-matched ABS edging | |
| internal support frame | Powder-coated rectangular steel tube understructure | |
| cable management components | ABS plastic grommets and steel cable tray | |
| drawer hardware (if fitted) | Cold-rolled steel three-section ball-bearing slides | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| cable management | Dual desktop grommets with under-desk cable tray to route power and data cords | |
|---|---|---|
| storage integration | Pre-drilled mounting points for matching mobile file pedestal under side returns | |
| seated work access | Central knee opening provides unobstructed legroom for executive office chair | |
| surface durability | Stain, water and scratch resistant melamine surface for daily office use | |
| leveling adjustment | Adjustable feet on base to stabilize desk on uneven office flooring | |
| modesty coverage | Full-height front ribbed panel blocks knee view for office privacy | |
| extended work surface | Dual symmetric side returns provide additional space for peripherals and documents | |
| locking storage compatibility | Compatible with lockable drawer pedestal for secure document storage | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | Main top 2500× 1050× 350 mm; return/pedestal packed separately | |
| Reference Packaged Gross Weight | 180 kg/set in 4 cartons | |
| Reference Packaging Volume | 1 m³/set |
Recommended spaces / users / usage modes
| private executive office | Primary use for CEO/manager private office, supports daily desk work and meetings | |
|---|---|---|
| high-end corporate workspace | Suitable for premium corporate headquarters and grade-A office buildings | |
| paired matching cabinetry | Designed for use with matching full-height back wall bookcase and storage units | |
| single user dedicated workstation | Optimized for single senior employee use with extended surface for documents and peripherals | |
| visitor meeting at desk | Wide front profile supports short seated visitor meetings across the desk surface | |
| formal office reception for senior staff | Suitable for formal meetings with internal staff and visiting clients | |
| office carpet or hard flooring installation | Leveling feet support installation on both low-pile carpet and hard commercial flooring |
EU Market Access Requirements* EN Standards
| EN 527-1:2011 | Office work tables - Part 1: Dimensions, applicable for work surface height and clearance verification | |
|---|---|---|
| EN 527-2:2002 | Office work tables - Part 2: Mechanical safety requirements for structural stability | |
| EN 13722:2004 | Furniture - Assessment of surface resistance to abrasion for desktop finish performance | |
| EN 717-1:2004 | Wood-based panels - Formaldehyde release testing for indoor air quality compliance |
US and Canada office-furniture standards
| ANSI/BIFMA X5.5-2021 | Desk Products standard, applicable for structural load and durability testing for commercial office use | |
|---|---|---|
| ANSI/BIFMA X5.9-2019 | Storage Units standard, applicable if fitted with integrated drawer or cabinet components | |
| ANSI/BIFMA e3-2019 | Furniture sustainability standard for material emissions and environmental impact assessment |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for desk panel and structural integrity checks | |
|---|---|---|
| GB/T 4897.3-2003 | Particleboard for furniture use, applicable for substrate formaldehyde emission and strength verification | |
| GB 18584-2001 | Indoor decorating and refurbishing materials - limit of harmful substances for wooden furniture | |
| GB/T 1931-2009 | Wood moisture content determination method for furniture production quality control |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for desk panel and structural integrity checks; 2. GB/T 4897.3-2003: Particleboard for furniture use, applicable for substrate formaldehyde emission and strength verification; 3. GB 18584-2001: Indoor decorating and refurbishing materials - limit of harmful substances for wooden furniture; 4. GB/T 1931-2009: Wood moisture content determination method for furniture production quality control; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
