Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	1200 × 600 × 450 mm
Overall closed dimensions	1200 x 600 x 450 mm
Lifted total table height	700 mm
Lift-top panel dimensions	700 x 600 mm
Fixed left top panel dimensions	500 x 600 mm
Recessed open storage well internal dimensions	450 x 550 x 120 mm
Hidden under-lift storage compartment internal height	345 mm
Tabletop panel thickness	25 mm
Fluted front panel slat width	20 mm
Power module faceplate dimensions	100 x 40 mm
Plinth base foot height	20 mm
Corner radius on all edges	25 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Overall table static distributed load	204 kg
Lifted tabletop maximum static load	50 kg
Recessed storage compartment maximum load	91 kg
Hidden under-lift storage maximum load	91 kg
Lift mechanism travel distance	250 mm
Integrated AC outlet power rating	1500W
Integrated USB port output rating	12W
Power supply cord length	1.5 m
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Tabletop substrate	18mm thick CARB P2 grade MDF core
Tabletop surface finish	0.6mm light oak wood veneer with matte wear-resistant lacquer
Fixed side and end panels	15mm thick particleboard with off-white matte paint coating
Front decorative panel	12mm thick MDF with vertical fluted routing and off-white matte finish
Lift mechanism components	1.5mm thick powder-coated steel lift arms with soft-close buffer hinges
Plinth base trim	PVC edge banding with matte off-white finish, 2mm thick
Recessed storage well lining	Matching light oak laminate surface, wear-resistant easy-clean coating
Integrated power module housing	Flame-retardant ABS plastic casing with USB-A/AC outlets
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Lift-top height adjustment	Spring-assisted metal lift arm raises top to stable working height with one-hand operation
Dual-zone storage access	Recessed open well on fixed left section plus enclosed hidden compartment under lift top
Integrated device charging	Side-panel power module provides 2 AC outlets and 2 USB-A ports for laptop/phone charging
Lift-top stable locking	Mechanical lock holds raised tabletop in fixed elevated position
Soft-close lowering	Buffer hinges reduce lowering speed to prevent finger pinching and surface impact
Anti-collision edge design	All tabletop and base corners rounded to 25mm radius
Low-profile plinth support	Fully enclosed block base distributes weight evenly across floor
Surface stain resistance	Matte lacquer finish repels liquid spills and allows wipe-clean maintenance
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Residential living room use	Placed in front of sofas for snack service, laptop work, and remote control storage
Small apartment multi-function space	Serves as alternative dining or work surface when lift top is raised
Home media room setup	Integrated charging ports power streaming devices, phones and remotes without trailing cords
Modern minimalist interior schemes	Two-tone oak/off-white fluted design coordinates with Scandinavian and contemporary decor
Rental property furnishing	Durable easy-clean surface and built-in storage reduce need for additional furniture
Open-concept lounge areas	Wide rectangular footprint anchors seating groupings in large open living spaces

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 12521:2015	Safety, strength and durability requirements for domestic living room tables
EN 62368-1:2020	Safety standard for audio/video, information and communication technology equipment in furniture chargers
EN 312:2010	Performance requirements for particleboard substrates used in furniture construction

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to dimensional and structural acceptance
GB 18580-2017	Formaldehyde emission limits for wood-based panels, required for indoor air quality compliance
GB 7000.204-2008	Safety requirements for furniture-integrated electrical outlets and charging components

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to dimensional and structural acceptance;
2. GB 18580-2017: Formaldehyde emission limits for wood-based panels, required for indoor air quality compliance;
3. GB 7000.204-2008: Safety requirements for furniture-integrated electrical outlets and charging components;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · LCT-FL-OAKWH-1200

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · LCT-FL-OAKWH-1200

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · LCT-FL-OAKWH-1200Open Export Tool

Quick Actions

Post an RFQ

Product Description

The Two-Tone Fluted Lift-Top Coffee Table with Integrated Charging Station, model LCT-FL-OAKWH-1200, is an unbranded modern minimalist public and residential furnishing defined by clean, intentional form. Its rectangular silhouette pairs a light oak wood veneer tabletop with off-white matte finished side, end, and front panels, the latter featuring crisp vertical fluted detailing for subtle textural depth. All tabletop and base corners carry a soft rounded radius, paired with a low-profile, fully enclosed plinth base that sits flush to the floor for a streamlined, uncluttered visual presence. The surface is split between a fixed left panel and a larger right lift-top panel, creating a balanced asymmetric layout aligned with contemporary and Scandinavian design schemes. Constructed for durable daily use, the table is built on an engineered wood substrate, with an 18mm CARB P2 grade MDF core for the tabletop finished in 0.6mm light oak veneer with a matte wear-resistant lacquer. Side and end panels use 15mm particleboard coated in off-white matte paint, while the fluted front panel is formed from 12mm routed MDF with a matching off-white finish. The spring-assisted lift mechanism uses 1.5mm powder-coated steel arms fitted with soft-close buffer hinges, with plinth edges trimmed in 2mm matte off-white PVC. The integrated power module is housed in flame-retardant ABS plastic, and the recessed open storage well is lined with light oak laminate featuring an easy-clean, wear-resistant coating. Functional design centers on adaptable use: the lift-top operates smoothly with one hand, locking securely at a 700mm total raised height to create a stable work or casual dining surface, with soft-close hinges preventing finger pinching and surface impact during lowering. Dual storage zones include a recessed open well on the fixed left section for frequently accessed items, and a deep enclosed compartment under the lift top for concealed storage. The side-mounted power module integrates 2 AC outlets and 2 USB-A ports, supporting device charging without loose trailing cords. Rated static load capacity reaches 204kg across the full closed table, with 50kg supported on the raised tabletop and 91kg in each storage zone. This table fits seamlessly into residential living rooms positioned in front of sofas for snack service and media access, small apartment multi-function spaces as a compact alternative dining or work surface, home media rooms to power streaming devices and personal electronics, furnished rental properties to reduce the need for extra accent furniture, and open-concept lounge areas where its wide rectangular footprint anchors grouped seating arrangements. It also aligns with modern minimalist interior palettes through its coordinated two-tone finish. For procurement planning, note that each unit ships in 2 cartons with a total packaged gross weight of 90kg, requiring 40 minutes of assembly per set. Teams should account for the 1200 x 600 x 450mm closed footprint to ensure proper fit within intended seating layouts, and confirm access to power sources adjacent to placement to make full use of the integrated charging features. The durable, easy-clean surfaces reduce long-term maintenance demands for high-traffic shared and residential spaces.

Two-Tone Fluted Lift-Top Coffee Table with Integrated Charging Station Specifications

Suppliers and stock