Product supplierAsymmetric Lift-Top Extendable Coffee Table with Integrated Charging Ports and Hidden Storage, E1-grade MDF with light oak wood grain veneer
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 1200 × 711 × 698 mm | |
|---|---|---|
| Tabletop panel thickness | 25 mm | |
| Storage base unit dimensions | 750 x 450 x 500 mm | |
| Cantilever support leg wall thickness | 40 mm | |
| Lift mechanism vertical travel height | 198 mm | |
| Extended tabletop cantilever overhang length | 450 mm | |
| Charging port panel recessed depth | 8 mm | |
| Floor clearance under storage base plinth | 10 mm | |
| Hidden under-top storage compartment internal dimensions | 700 x 400 x 120 mm | |
| Rounded corner radius on all panels | 20 mm | |
| Extended tabletop width across full span | 1200 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Total product net weight | 49 kg | |
|---|---|---|
| Static distributed load capacity (fixed top section over storage base) | 45 kg | |
| USB port power output per port | 12 W | |
| AC outlet power rating (if equipped) | 1500 W | |
| Lift mechanism cycle durability rating | 10000 cycles | |
| Recommended maximum number of seated users for lifted work/dining use | 2 | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Storage base structural panels | E1-grade MDF with light oak wood grain veneer | |
|---|---|---|
| Cantilever leg and lift trim panels | E1-grade MDF with matte off-white polyurethane paint finish | |
| Tabletop surface panels | E1-grade particle board with matching light oak laminate finish | |
| Lift and extension mechanism components | 2.5 mm thick hot-rolled steel with electrophoresis black anti-corrosion finish | |
| Edge banding on all panels | 1 mm thick PVC edge trim matching panel finish | |
| Base plinth floor contact pads | Non-marking 3 mm thick felt glides | |
| Charging port housing | ABS plastic with brushed silver metallic faceplate | |
| Internal storage compartment lining | Non-woven matte grey fabric lining | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Gas-spring assisted lift-top operation | Locks at fixed 698 mm work height, soft-close buffer prevents slamming | |
|---|---|---|
| Extendable rotating tabletop deployment | Swivels and slides out from storage base to create 900 mm total work depth | |
| Dual integrated USB charging ports | Provides 5V/2.4A output for charging mobile devices from sofa position | |
| Hidden enclosed storage compartment access | Revealed when lift top is raised, for stowing remote controls, blankets, or office supplies | |
| Cantilever leg anti-tip design | Structural steel bracket transfers extended top load to the storage base frame | |
| Flush-mounted top control slot | Houses lift release lever for one-handed operation without protruding hardware | |
| Fixed closed coffee table mode | Sits at 500 mm height for standard living room beverage and display use | |
| Lifted work/dining mode for sofa use | Positions top at ergonomic height for laptop work or casual dining while seated on sofa | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Small urban apartment living rooms | Dual-use coffee/dining/work surface saves floor space in compact open-plan layouts | |
|---|---|---|
| Sofa-side casual work setups | Lifted height supports laptop work for remote workers without a dedicated home office | |
| Casual in-front-of-sofa dining | Extended top provides sufficient surface area for takeout meals or movie-night snacks | |
| Open-plan lounge and reception areas | Two-tone oak/off-white finish fits modern minimalist, Nordic, and contemporary interior styles | |
| Charging station placement near seating | Integrated USB ports eliminate need for separate power strips near the sofa | |
| Hidden storage for living room clutter | Enclosed compartment stows remotes, charging cables, throw pillows, and reading materials |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 12521:2015 Furniture strength, durability, safety for residential tables | Applicable test standard for static load, impact, and stability performance | |
|---|---|---|
| EN 14749:2016 Safety requirements for domestic storage furniture and kitchens | Applies to structural safety of the integrated storage base unit | |
| EN 62368-1:2020 Safety for audio/video, information and communication technology equipment | Applies to safety of integrated USB/AC charging modules |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 3324-2017 General technical requirements for wooden furniture | Applies to structural safety, dimensional tolerance, and finish quality of wood-based components | |
|---|---|---|
| GB 18580-2017 Formaldehyde emission limits for wood-based panels | Requires E1 emission grade for all engineered wood panels used in indoor furniture | |
| GB/T 4897.3-2003 Particle board for furniture use | Applies to structural performance of particle board tabletop components | |
| GB 7000.204-2008 Safety requirements for built-in furniture power outlets | Applies to integrated USB and AC charging port electrical safety |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 3324-2017 General technical requirements for wooden furniture: Applies to structural safety, dimensional tolerance, and finish quality of wood-based components; 2. GB 18580-2017 Formaldehyde emission limits for wood-based panels: Requires E1 emission grade for all engineered wood panels used in indoor furniture; 3. GB/T 4897.3-2003 Particle board for furniture use: Applies to structural performance of particle board tabletop components; 4. GB 7000.204-2008 Safety requirements for built-in furniture power outlets: Applies to integrated USB and AC charging port electrical safety; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool