Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	1300 × 710 × 430 mm
Overall set footprint when fully extended	1600 x 710 mm
Large table top thickness	12 mm
Small table top thickness	12 mm
Large table leg metal tubing section	40 x 20 mm
Small table leg metal tubing section	30 x 30 mm
Metal frame wall thickness	1.2 mm
Clearance under large table	390 mm
Clearance under small table	520 mm
Large table corner radius	80 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Distributed static load capacity per table	90 kg
Total set net weight	32 kg
Top surface heat resistance	1200 °C
Top surface abrasion resistance	Grade 3
Frame rust resistance	500 hours salt spray
Floor protection pad diameter	25 mm
Suggested maximum seating group size	3 person sofa
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Large table top	12mm dark sintered stone with subtle geometric line pattern, polished finish
Small table top	12mm white sintered stone, matte white finish
Large table frame	Powder-coated black carbon steel, cross-braced sled support structure
Small table frame	Powder-coated black carbon steel, T-shaped three-point support base
Frame finish	Baked matte black powder coating, chip and rust resistant
Foot pads	PVC non-slip non-scratch floor protection pads fitted to all leg ends
Hardware connectors	Zinc-plated steel M6 assembly bolts with lock washers
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support
Reference Finish / Color Count	Recommended 6top finishes and 3frame colors

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Nesting storage function	Small round table slides fully under edge of large oval table to reduce footprint
Fixed height design	No adjustable height or moving mechanisms on either table
Surface utility	Smooth non-porous tops support placement of drinks, books, and decorative objects
Independent use capability	Both tables can be used separately as a main coffee table and side accent table
Assembly requirement	Knock-down assembly requiring attachment of legs to tops with included hardware
Floor protection	Soft PVC pads on all leg bases prevent scratching hard flooring surfaces
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Primary residential use	Placement in front of living room sofas for holding drinks, reading materials, and decor
Small space application	Suitable for compact apartments and studios due to space-saving nesting design
Office reception use	Applicable for lounge and reception seating areas in modern office spaces
Styling compatibility	Pairs with upholstered leather or fabric sofas in neutral grey, black, or white color schemes
Side table versatility	Small table can be pulled out for use as an independent side table next to accent chairs
Surface care suitability	Non-porous sintered stone tops are suitable for daily use without coasters for cold and hot drinks

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

Surface safety recommendation	EN 12721:2000
Stability recommendation	EN 1730:2000
Edge safety recommendation	EN 12521:2015

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

Surface durability recommendation	GB/T 37667
Frame finish recommendation	GB/T 13667.1
Stability recommendation	GB/T 10357.1
Load bearing recommendation	GB/T 10357.3

Standardized tender description text

This product must meet the following technical requirements:
1. Surface durability recommendation: GB/T 37667;
2. Frame finish recommendation: GB/T 13667.1;
3. Stability recommendation: GB/T 10357.1;
4. Load bearing recommendation: GB/T 10357.3;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · NCT-OBW-2PC-MF

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · NCT-OBW-2PC-MF

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · NCT-OBW-2PC-MFOpen Export Tool

Quick Actions

Post an RFQ

Product Description

This two-piece nesting coffee table set balances minimalist modern styling with flexible, space-efficient functionality for both residential and commercial settings. The set features two distinct top profiles: a larger oval table with a dark sintered stone top marked by subtle geometric line patterns and a smooth polished finish, paired with a smaller round table topped with matte white sintered stone. Both tabletops measure 12mm thick, creating a cohesive visual weight across the pair, supported by matching matte black powder-coated carbon steel frames. The large table uses a cross-braced sled support structure built from rectangular metal tubing, while the smaller table sits on a T-shaped three-point support base with square-section metal tubing, and all leg ends are fitted with soft PVC pads to protect hard flooring from scratches. Designed for flexible layout, the smaller round table slides fully under the edge of the large oval table to reduce overall footprint when not in active use, and both tables can be deployed independently: the larger oval works as a primary coffee table, while the smaller round functions as a side accent table pulled close to seating. Both tables feature a fixed height design with no moving adjustment mechanisms, and their smooth non-porous sintered stone tops support everyday placement of drinks, books, and decorative objects, withstanding hot and cold beverages without requiring coasters for regular daily use. Each table supports a distributed static load of 90kg, and the set is sized to pair effectively with seating groups anchored by a three-person sofa, complementing upholstered leather or fabric sofas in neutral grey, black, or white palettes. This set is well suited for compact residential living rooms, apartments, and studios where space optimization is a priority, as well as modern office lounge and reception areas. Procurement teams and residential buyers should note the set ships in two cartons, requires knock-down assembly with included zinc-plated steel hardware, and has a reference assembly time of 40 minutes per set. The frames feature a chip and rust resistant baked powder coating, and the cable management integration supports tidy routing of power and data cables for tech-enabled lounge setups.

2-Piece Nesting Coffee Table Set with Dark Geometric Oval Top and White Round Top Specifications

Suppliers and stock