| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall nested set dimensions (large oval table) | 1100 x 700 x 400 mm | |
|---|---|---|
| Small round table dimensions | 600 x 600 x 500 mm | |
| Large oval tabletop thickness | 30 mm | |
| Large table pedestal base diameter | 350 mm | |
| Small round tabletop thickness | 25 mm | |
| Small table pedestal base diameter | 300 mm | |
| Raised tray lip height on both tops | 15 mm | |
| Underside floor clearance for large table | 10 mm | |
| Nesting overlap depth (small table under large) | 300 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Large table distributed static load capacity | 50 kg | |
|---|---|---|
| Finish abrasion resistance (tabletops) | 2000 cycles | |
| Set total net weight | 42 kg | |
| Recommended maximum place setting/object weight per table | 15 kg | |
| Minimum floor contact stability (tilt angle) | 15 degrees | |
| Surface heat resistance (veneer/lacquer) | 80 °C | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Large oval tabletop substrate | 18 mm thick MDF core with dark walnut wood veneer | |
|---|---|---|
| Large tabletop finish | Matte open-pore wood sealant coating | |
| Small round tabletop substrate | 18 mm thick MDF core | |
| Small tabletop finish | Matte taupe lacquer coating | |
| Large table pedestal base | Cylindrical solid wood composite with matching walnut veneer | |
| Small table pedestal base | Tapered cylindrical MDF with matching taupe matte lacquer | |
| Tray edge construction | Integrally routed solid wood lipping around table perimeter | |
| Base bottom pads | 4 mm thick non-slip felt floor protectors | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Space-saving nesting design | Small table tucks partially under large table to reduce footprint | |
|---|---|---|
| Raised tray edge containment | 15 mm perimeter lip prevents small items, books or decor from sliding off | |
| Flexible dual-surface layout | Tables can be separated for extended surface area or nested for compact use | |
| Single central pedestal support | No peripheral leg obstructions around table edges for unobstructed legroom | |
| Hard floor protection | Felt base pads prevent scuffing on polished concrete, wood or tile floors | |
| Easy surface maintenance | Matte finish wipes clean with damp soft cloth, no special sealant required | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential living room placement | Positioned in front of sofas or sectionals for drinks, decor and reading material use | |
|---|---|---|
| Small apartment and open-plan space use | Nesting design reduces footprint when not in use for compact living areas | |
| Modern wabi-sabi and minimalist interior schemes | Two-tone walnut and taupe palette complements neutral toned upholstery and decor | |
| Light commercial lounge use | Suitable for boutique waiting areas or studio lounge spaces for guest refreshments | |
| Flexible side table use | Small round table can be used standalone as an accent side table next to armchairs |
EU Market Access Requirements* EN Standards
| EN 12521:2015 Furniture – Strength, durability and safety – Requirements for domestic tables | Applicable for domestic coffee table strength, stability and durability testing | |
|---|---|---|
| EN 13722:2004 Furniture – Test methods for the assessment of surface resistance to cold liquids | Applicable for tabletop finish stain resistance verification |
Standards applicable to China-market projects
| GB/T 3324-2017 General technical requirements for wooden furniture | Applicable for wooden furniture dimensional stability and structural safety verification | |
|---|---|---|
| GB 18584-2001 Indoor decorating and refurbishing materials – Limit of harmful substances of wood based furniture | Applicable for formaldehyde emission limit verification for wood-based substrates |
This product must meet the following technical requirements: 1. GB/T 3324-2017 General technical requirements for wooden furniture: Applicable for wooden furniture dimensional stability and structural safety verification; 2. GB 18584-2001 Indoor decorating and refurbishing materials – Limit of harmful substances of wood based furniture: Applicable for formaldehyde emission limit verification for wood-based substrates; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
