| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall set dimensions (nested) | 800 x 800 x 470 mm | |
|---|---|---|
| Large table diameter | 800 mm | |
| Large table height | 470 mm | |
| Large tabletop thickness | 15 mm | |
| Small table diameter | 600 mm | |
| Small table height | 414 mm | |
| Leg diameter (per leg) | 15 mm | |
| Leg splay angle from vertical | 15 degrees | |
| Edge trim width | 10 mm | |
| Nested footprint depth | 800 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Large table static distributed load | 55 kg | |
|---|---|---|
| Small table static distributed load | 27 kg | |
| Total product net weight | 9 kg | |
| Surface stain resistance rating | Level 2 for household liquid spills | |
| Surface scratch resistance | 2H pencil hardness | |
| Recommended maximum user weight for edge seating | 80 kg | |
| Wobble tolerance on level floor | 2 mm maximum | |
| Finish abrasion cycles (metal legs) | 1000 cycles | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Large tabletop substrate | High-density MDF core with white marble-effect laminate | |
|---|---|---|
| Small tabletop substrate | High-density MDF core with matching white marble-effect laminate | |
| Tabletop edge trim | 0.8mm thick gold-finished steel band | |
| Table legs | 15mm diameter tapered cold-rolled steel with brushed gold powder coating | |
| Leg-to-tabletop connectors | M6 steel threaded inserts with zinc plating | |
| Surface finish coating (tabletop) | UV-cured clear wear layer | |
| Leg foot pads | 5mm thick non-slip TPE rubber pads | |
| Assembly hardware | Zinc-plated steel screws and Allen key | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Nesting storage function | Small table slides fully under large table to reduce floor space by 44% when not in use | |
|---|---|---|
| Independent use function | Both tables can be separated and used as standalone accent tables for drinks or decor | |
| Floor protection function | Rubber foot pads on each leg prevent scuffing on hardwood, tile, and carpet surfaces | |
| Level stability function | Three-leg splayed base maintains stable contact on slightly uneven residential floors | |
| Stain cleanup function | Smooth non-porous tabletop surface allows wet wiping of spills without water damage | |
| Assembly requirement | Legs attach to pre-installed threaded inserts on tabletop underside with included Allen key | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Shipping carton dimensions | 880 x 680 x 180 mm | |
|---|---|---|
| Total packaged gross weight | 18 kg | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Living room center seating area | Placed in front of 3seater sofas for holding drinks, reading materials and decor | |
|---|---|---|
| Small apartment and studio spaces | Nesting design saves floor space when extra surface area is not required | |
| Reception and waiting areas | Used in office or salon waiting zones for guest refreshments and reading materials | |
| Balcony casual lounge zones | Used as light accent tables for covered outdoor seating areas | |
| Bedroom accent placement | Separated tables used as nightstands for bedside lighting and personal items |
EU Market Access Requirements* EN Standards
| Household furniture safety for tables | EN 12521:2015 | |
|---|---|---|
| Surface formaldehyde emission for panels | EN 312:2010 P2 grade |
Standards applicable to China-market projects
| Tabletop formaldehyde emission | GB/T 18580E1 grade | |
|---|---|---|
| Metal furniture coating adhesion | GB/T 9286Grade 1 | |
| Furniture mechanical stability | GB/T 10357.1 |
This product must meet the following technical requirements: 1. Tabletop formaldehyde emission: GB/T 18580E1 grade; 2. Metal furniture coating adhesion: GB/T 9286Grade 1; 3. Furniture mechanical stability: GB/T 10357.1; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
