| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 900 x 900 x 460 mm | |
|---|---|---|
| Table top thickness | 18 mm | |
| Frame wire diameter | 10 mm | |
| Base footprint | 880 x 880 mm | |
| Under-table floor clearance | 432 mm | |
| Side frame trapezoid angle | 72 degrees | |
| Bottom frame border width | 20 mm | |
| Diagonal X-brace spacing | 220 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Product net weight | 13 kg | |
|---|---|---|
| Distributed table top static load | 91 kg | |
| Frame static vertical load per leg joint | 350 N | |
| Surface scratch resistance | 3H pencil hardness | |
| Recommended occupancy | 4 users | |
| Weld joint durability | 10000 lbs static load test pass | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Table top substrate | High-density fiberboard or sintered stone | |
|---|---|---|
| Table top surface finish | Matte black wear-resistant laminate/coating | |
| Frame material | Q235 mild steel wire rod | |
| Frame surface finish | Matte black electrostatic powder coating | |
| Joint construction | Full penetration TIG welds at all wire intersections | |
| Floor contact points | Integrated steel frame bottom perimeter | |
| Assembly hardware | Zinc-plated steel M6 bolts and lock washers | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
Adjustment / rotation / tilt / mobility / storage features
| Assembly requirement | Knock-down assembly of table top to pre-welded base frame | |
|---|---|---|
| Surface use | Suitable for placing drinkware, books, decor and light serving items | |
| Stability feature | Intersecting diagonal X-brace frame eliminates lateral racking | |
| Floor protection | Optional self-adhesive felt glides for hard floor surfaces | |
| Positioning | Stationary central placement for lounge seating areas | |
| Under-table access | Open wire frame allows unobstructed floor cleaning under table | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential living room | Central placement in front of sofas for lounge serving and decor use | |
|---|---|---|
| Office reception area | Placement between guest seating for beverage and reading material display | |
| Studio apartment lounge | Compact square footprint suits small urban living spaces | |
| Recommended seating pairing | Paired with 4-seat modular or 3+1 seat sofa arrangements | |
| Surface use case | Supports decorative objects, coffee service, laptops for casual lounge work |
EU Market Access Requirements* EN Standards
| Domestic furniture safety | EN 12521:2015 |
|---|
Standards applicable to China-market projects
| Surface panel performance | GB/T 17657 | |
|---|---|---|
| Metal coating adhesion | GB/T 9286 | |
| Furniture stability | GB/T 10357.1 |
This product must meet the following technical requirements: 1. Surface panel performance: GB/T 17657; 2. Metal coating adhesion: GB/T 9286; 3. Furniture stability: GB/T 10357.1; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
