| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall set footprint (nested) | 800 x 800 x 500 mm | |
|---|---|---|
| Large table diameter | 800 mm | |
| Large table total height | 450 mm | |
| Large tabletop thickness | 18 mm | |
| Small table diameter | 600 mm | |
| Small table total height | 500 mm | |
| Base spread diameter (per table) | 580 mm | |
| Vertical support column section | 30 x 30 mm | |
| Base foot length (prong) | 280 mm | |
| Nesting clearance between tables | 50 mm | |
| Table edge radius | 9 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Set total net weight | 18 kg | |
|---|---|---|
| Large tabletop distributed static load | 23 kg | |
| Small tabletop distributed static load | 15 kg | |
| Base floor contact static load rating | 50 kg per table | |
| Surface horizontal impact resistance | 10 J | |
| Recommended maximum user weight for temporary edge seating | 100 kg | |
| Finish abrasion resistance (tabletop) | 2000 cycles | |
| Powder coating salt spray resistance (base) | 48 hours | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Large tabletop substrate | 18mm MDF core with white marble-look melamine laminate | |
|---|---|---|
| Small tabletop substrate | 18mm MDF core with matching white marble-look melamine laminate | |
| Table edge banding | 1mm matching PVC edge banding | |
| Vertical support columns | 30x30mm square steel tube, matte black powder-coated finish | |
| Three-prong base feet | 2mm thick flat steel bar, matte black powder-coated finish | |
| Floor contact pads | 5mm thick non-slip rubber pads at each prong end | |
| Connection hardware | M8 zinc-plated steel bolts and pre-installed threaded inserts | |
| Surface finish texture | Low-sheen smooth marble-vein finish with subtle gray veining | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Nesting storage function | Small table slides partially under large table to reduce footprint to 0.64 sqm | |
|---|---|---|
| Dual-height use function | Two distinct table heights support separate drink, decor and reading material placement | |
| Independent table use | Both tables can be separated and used as standalone side tables in different room zones | |
| Floor protection function | Rubber base pads eliminate metal-to-floor contact and prevent skid marks on hard flooring | |
| Assembly requirement | Knock-down assembly requires attaching base columns to tabletop with included hardware | |
| Surface maintenance | Non-porous laminate surface allows wipe-clean with damp cloth, no sealing required | |
| Weight distribution design | Three-prong base spreads load evenly across three floor contact points to prevent wobble on low-pile carpet | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Primary application space | Residential living rooms placed on area rugs in front of upholstered sofas | |
|---|---|---|
| Secondary application space | Small apartment lounge areas or studio open-plan living zones | |
| Target user group | Urban homeowners and renters seeking minimalist modern accent furniture | |
| Recommended decor pairing | Neutral upholstered sofas, light neutral wall finishes, textured low-pile rugs | |
| Use case suitability | Holding drinks, small decor objects, books, and table lamps for daily living room use | |
| Commercial secondary use | Lounge areas in boutique offices, hotel lobbies, and modern cafe waiting spaces |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture – Strength, durability and safety for domestic tables, applicable for load testing | |
|---|---|---|
| EN 13722:2004 | Furniture – Test methods for surface finish resistance to wear and staining |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applies to tabletop substrate performance | |
|---|---|---|
| GB/T 17657-2013 | Test methods for wood-based panels, applicable for surface wear and formaldehyde verification | |
| GB/T 19001-2016 | Quality management system guideline for consistent manufacturing tolerance control |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applies to tabletop substrate performance; 2. GB/T 17657-2013: Test methods for wood-based panels, applicable for surface wear and formaldehyde verification; 3. GB/T 19001-2016: Quality management system guideline for consistent manufacturing tolerance control; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
