Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	1500 × 800 × 450 mm
Overall assembled dimensions	1500 x 800 x 450 mm
Tabletop thickness	18 mm
Floor resting base plate length	1100 mm
Floor resting base plate width	400 mm
Base plate thickness	8 mm
Vertical Z-support panel height	380 mm
Tabletop corner radius	80 mm
Floor clearance under tabletop	432 mm
Base overhang from table centerline	750 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Net product weight	65 kg
Distributed static top load capacity	50 kg
Recommended maximum concentrated point load	15 kg
Base anti-slip pad count	4
Surface stain resistance rating	Grade 4
Powder coating scratch resistance	2H pencil hardness
Recommended user capacity	4 users
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Tabletop substrate and finish	Polished white marble-veined sintered stone, sealed with anti-fouling topcoat
Support base structure	Matte black powder-coated low-carbon steel, welded geometric Z-form
Base floor contact pads	3 mm thick non-marking EVA rubber pads
Tabletop to base connectors	M8 zinc-plated steel countersunk bolts with lock washers
Top edge treatment	Softly radiused polished stone edge, no sharp corners
Base surface coating thickness	80 micron matte black powder coat
Stone surface moisture absorption rate	0.02%
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support
Reference Finish / Color Count	Recommended 6top finishes and 3frame colors

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Cantilever Z-base design	Open floor clearance without center legs, allows foot placement and rug clearance
Floor protection function	Non-slip rubber base pads prevent hard floor scratching and reduce sliding noise
Surface use function	Polished sealed non-porous top supports drinkware, decor, and books with easy stain wipe-down
Assembly requirement	Two-piece assembly attaching stone top to pre-welded metal base, no complex hardware
Load distribution design	Wide flat floor base plate spreads weight to avoid indentation on thick pile carpets
Stability performance	Offset cantilever weight balance prevents tipping under normal front-edge loading
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Living room lounge placement	Positioned in front of 3-seat upholstered sofas for shared drink and decor placement
Residential apartment use	Suitable for modern, light luxury, and minimalist interior design schemes
Lounge and reception area use	Appropriate for small office reception lounges and hotel public seating areas
Recommended surface use	Hold coffee table books, decorative bowls, table lamps, and small serving trays
Rug compatible placement	Wide flat base distributes weight evenly for use on low and medium pile area rugs

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 15372:2016	Furniture - Strength, durability and safety for domestic non-seating furniture
EN 12520:2015	Furniture - Mechanical safety requirements for domestic tables
EN 13722:2004	Furniture - Test methods for surface resistance to cold liquids

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements for wooden furniture, applicable for structural safety and dimensional tolerance
GB 18584-2001	Limit of harmful substances in interior decoration wood-based furniture, applicable for formaldehyde emission control
GB/T 4893.9-2013	Furniture surface test method for impact resistance, applicable to stone and metal finish durability

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for structural safety and dimensional tolerance;
2. GB 18584-2001: Limit of harmful substances in interior decoration wood-based furniture, applicable for formaldehyde emission control;
3. GB/T 4893.9-2013: Furniture surface test method for impact resistance, applicable to stone and metal finish durability;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · CT-ZMB-1508

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · CT-ZMB-1508

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · CT-ZMB-1508Open Export Tool

Quick Actions

Post an RFQ

Product Description

The Contemporary White Marble-Veined Coffee Table with Geometric Black Metal Z-Base (model CT-ZMB-1508, unbranded) presents a sleek, low-profile silhouette defined by balanced minimalist geometry. Its softly radiused polished tabletop corners eliminate sharp edges, while the offset cantilever Z-form base creates an open, uncluttered visual flow without obstructive center legs, matching modern and light luxury interior aesthetics seamlessly. The polished white marble-veined sintered stone top is sealed with an anti-fouling topcoat, cut to 18 mm thickness with an 80 mm corner radius, and supported by a matte black powder-coated low-carbon steel base. The welded Z-structure features an 8 mm thick floor plate, connected to the tabletop with M8 zinc-plated steel countersunk bolts and lock washers. Four 3 mm thick non-marking EVA rubber pads line the base floor contact points, and the 80 micron powder coat finish delivers 2H pencil hardness scratch resistance. The non-porous stone surface has a 0.02% moisture absorption rate and Grade 4 stain resistance, allowing simple wipe-down of spills from drinkware, decor, books, and small serving trays. The open 432 mm floor clearance under the tabletop accommodates comfortable foot placement and unobstructed rug fit, while the wide 1100 mm by 400 mm floor plate spreads the table’s 65 kg net weight evenly to prevent carpet indentation. The anti-slip pads reduce sliding noise and protect hard flooring from scratches, while the offset weight balance resists tipping under normal front-edge loading. Integrated cable management supports 10 power or data cables with a 10 kg tray load capacity, and the table holds a 50 kg distributed static load or 15 kg concentrated point load for four designated users. Simple two-piece assembly between the stone top and pre-welded base takes 40 minutes per set, with no complex hardware required. The table is sized at 1500 x 800 x 450 mm, ideal for placement in front of 3-seat upholstered sofas in residential living rooms aligned with modern or minimalist design schemes. It also suits small office reception lounges and hotel public seating areas, and performs reliably on low and medium pile area rugs. Procurement teams should note the set ships in two cartons with a 90 kg total packaged weight and 0.55 m³ packaging volume, and plan for appropriate handling support given the solid stone construction weight.

Contemporary White Marble-Veined Coffee Table with Geometric Black Metal Z-Base Specifications

Suppliers and stock