| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| TV console overall dimensions | 2000 x 414 x 450 mm | |
|---|---|---|
| TV console individual drawer front width | 480 mm | |
| TV console top overhang | 20 mm | |
| TV console leg height | 120 mm | |
| TV console drawer internal usable depth | 380 mm | |
| Large round coffee table diameter | 762 mm | |
| Large round coffee table height | 508 mm | |
| Small round nesting side table diameter | 457 mm | |
| Small round nesting side table height | 610 mm | |
| Console top thickness | 30 mm | |
| Metal leg width (console) | 80 mm | |
| Recessed rotating extension travel (large coffee table) | 280 mm | |
| Carcass Panel Thickness | 25 mm | |
| Back Panel Thickness | 9 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
Net weight / load capacity / users / durability
| TV console top static load capacity | 68 kg | |
|---|---|---|
| Drawer slide cycle rating | 50000 open/close cycles | |
| Set net weight (total) | 125 kg | |
| Maximum supported TV size | 85 in | |
| Rotating table extension load rating | 15 kg | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points | |
| Recommended Procurement Warranty | Carcass 5 years; hardware 3 years; finish 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| TV console carcass | E1-grade MDF with matte off-white painted finish | |
|---|---|---|
| TV console and table tops | Faux white marble engineered stone veneer over MDF core | |
| TV console legs and vertical dividers | 1.5mm thick brushed gold-finished carbon steel | |
| Edge trim for all units | Polished gold-finished metal banding | |
| Large coffee table base | Rotating gold-finished metal ring base with matte white lower carcass | |
| Small side table pedestal | Sculptural twisted 2mm thick brushed gold-finished steel | |
| Drawer slides | Full-extension soft-close cold-rolled steel hardware | |
| Back panel (TV console) | 3mm thick hardboard with pre-cut cable openings | |
| Edge Band Thickness | 2 mm | |
| Primary Connector Specification | Reference M6-M8 cam/bolt fittings with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Drawer operation | 4 equal soft-close full-extension drawers with push-to-open release | |
|---|---|---|
| Cable management | Rear cable cutouts to route TV and media device power cords | |
| Large coffee table extension | Recessed rotating secondary surface swivels out to expand tabletop area | |
| Nesting configuration | Small side table nests partially under large coffee table to save floor space | |
| Floor protection | Non-marking felt pads on all metal base feet to prevent hard floor scratches | |
| Edge safety | All console and table corners have smooth rounded edges to reduce impact injury | |
| Drawer storage layout | Four equal enclosed bays separate media accessories, remote controls and living room clutter | |
| Surface maintenance | Stain-resistant smooth top finish allows wipe-clean care with soft damp cloth | |
| Cable / Vent Opening Reference | 80 mm diameter; recommend 4rear cable/vent openings |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
Recommended spaces / users / usage modes
| Primary application space | Modern residential living rooms positioned below wall-mounted flat screen TVs | |
|---|---|---|
| Complementary use | Coordinated set for open-plan living areas paired with standard depth sofas | |
| Target user | Consumers seeking light luxury aesthetic living room furniture with hidden storage | |
| Arrangement flexibility | Small side table can be pulled adjacent to sofas as an end table for drinks or decor | |
| Recommended styling pairings | Matches neutral upholstery, light tile or wood flooring and textured area rugs | |
| Storage function use | Console drawers conceal game consoles, media remotes, cords and living room clutter |
EU Market Access Requirements* EN Standards
| Domestic furniture safety (tables) | EN 12521:2015 | |
|---|---|---|
| Domestic furniture safety (storage) | EN 14749:2016 | |
| Furniture surface resistance | EN 12720:2009+A1:2013 |
Standards applicable to China-market projects
| Formaldehyde emission | GB 18584 | |
|---|---|---|
| Furniture mechanical performance (cabinets) | GB/T 10357.5 | |
| Furniture mechanical performance (tables) | GB/T 10357.1 |
This product must meet the following technical requirements: 1. Formaldehyde emission: GB 18584; 2. Furniture mechanical performance (cabinets): GB/T 10357.5; 3. Furniture mechanical performance (tables): GB/T 10357.1; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
