| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions (W x D x H) | 1300 x 700 x 550 mm | |
|---|---|---|
| Top surface thickness | 12 mm | |
| Lower shelf height from floor | 200 mm | |
| Vertical clearance between top and lower shelf | 280 mm | |
| Metal frame tube section size | 30 x 30 mm | |
| Vertical slat spacing on side frames | 80 mm | |
| Lower shelf thickness | 8 mm | |
| Integrated tea station recess depth | 20 mm | |
| Foot pad diameter | 30 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Product net weight range | 42 kg | |
|---|---|---|
| Top surface static load capacity | 80 kg | |
| Recommended user capacity | 4 people | |
| Surface abrasion resistance (top) | 6000 cycles | |
| Frame static load safety factor | 2.5 | |
| Integrated electric tea set power rating | 1350 W | |
| Recommended seated user capacity | 4 people | |
| Powder coat finish scratch resistance | 3H pencil hardness | |
| Leveling foot adjustment range | 10 mm | |
| Top Static Load Reference | 150 kg uniformly distributed |
Core acceptance fields · Panels / hardware / frame / upholstery
| Top surface | Polished black sintered stone with gold geometric line inlay | |
|---|---|---|
| Primary frame | Matte black powder-coated carbon steel square tube | |
| Lower storage shelf | Black tempered glass | |
| Integrated tea service set | Food-grade 304 stainless steel | |
| Tea tray | Food-grade melamine with stainless steel drain grid | |
| Frame weld joints | Full penetration welded joint with ground smooth finish | |
| Foot pads | Non-slip TPE adjustable leveling pads | |
| Surface coating on frame | Epoxy polyester powder coat | |
| Top surface edge profile | 45-degree chamfered polished edge, 1mm radius | |
| Assembly hardware | M8 zinc-plated steel hex bolts with lock washers, 16 total count | |
| Recessed tea station mounting panel | 15mm thick high-density particleboard with heat-resistant melamine finish | |
| Drain tubing for tea tray | 10mm diameter food-grade silicone tubing |
Adjustment / rotation / tilt / mobility / storage features
| Integrated tea preparation station | Recessed mount for electric kettle, sterilizer pot, and automatic water pump to support gongfu tea service without separate countertop appliances | |
|---|---|---|
| Two-tier open storage | Upper top for tea service and display, lower tempered glass shelf for books, tea caddies, and remote control storage | |
| Leveling adjustment | Adjustable TPE foot pads at each frame corner to compensate for uneven floor surfaces, eliminating table wobble | |
| Integrated drain system | Matching slotted tea tray with hidden drain connection to collect wastewater during tea preparation | |
| Open side access | Vertical slat frame design eliminates solid side panels, allowing leg clearance and access from all four sides of the table | |
| Floor protection | Soft TPE foot pads prevent scratching of hard flooring and low-pile carpet during use and repositioning | |
| Heat-resistant work zone | Recessed appliance mounting panel withstands continuous 120°C surface temperature from boiling kettles without damaging the table top | |
| Knock-down assembly | Frame and shelf components ship flat-packed, requiring only a hex key for assembly with pre-drilled alignment holes to reduce installation error | |
| Stain-resistant work surface | Non-porous polished sintered stone top resists tea, coffee and water ring stains, allowing wet cleaning without surface damage | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Number of shipping cartons | 2 | |
|---|---|---|
| Main carton dimensions (W x D x H) | 1380 x 780 x 180 mm | |
| Accessory carton dimensions (W x D x H) | 450 x 350 x 300 mm | |
| Total shipping gross weight | 48 kg | |
| Total shipping volume (CBM) | 0.24 m³ | |
| Assembly time | 30 minutes | |
| 20ft GP container loading quantity | 110 units | |
| 40ft HQ container loading quantity | 270 units | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set |
Recommended spaces / users / usage modes
| Living room tea service setup | Positioned in front of a sofa in residential living rooms for daily tea drinking and guest reception | |
|---|---|---|
| Office reception lounge use | Suitable for executive lounge areas and meeting waiting zones to serve tea to visiting clients | |
| Studio and small apartment use | Open frame design creates a light visual profile suitable for compact urban living spaces without appearing bulky | |
| Matching furniture coordination | Pairs with contemporary black and gray fabric or leather sofas, and light-tone wood or tile flooring | |
| Recommended accessory pairing | Matched with ceramic teaware sets, fabric coasters, and floor rugs positioned under the table to define the seating area | |
| Cleaning and maintenance suitability | Smooth sintered stone top and powder coated frame allow quick wipe-down cleaning after tea service, suitable for daily use | |
| Modern minimalist interior coordination | Pairs with contemporary black and gray fabric or leather sofas, and light-tone wood or polished tile flooring, with matte black frame and black stone finish complementing monochrome interior schemes | |
| Home tea room configuration | Used as primary tea preparation surface in dedicated home tea rooms, with integrated drain system and recessed appliance mount supporting full gongfu tea ceremony setups |
EU Market Access Requirements* EN Standards
| Domestic furniture safety general requirements | EN 12521:2015 | |
|---|---|---|
| Toughened safety glass for furniture | EN 12150:2004 | |
| Surface resistance to cold liquids for furniture tops | EN 12720:2009+A1:2013 | |
| Metal furniture coating performance | EN 16675:2016 |
Standards applicable to China-market projects
| General safety requirement for furniture | GB 28007 | |
|---|---|---|
| Glass furniture safety specification | GB/T 32438 | |
| Sintered stone for furniture | GB/T 39156 | |
| Indoor furniture harmful substance limit | GB 18584 |
This product must meet the following technical requirements: 1. General safety requirement for furniture: GB 28007; 2. Glass furniture safety specification: GB/T 32438; 3. Sintered stone for furniture: GB/T 39156; 4. Indoor furniture harmful substance limit: GB 18584; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
