Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	800 × 800 × 450 mm
Overall set footprint when fully nested	800 x 800 x 450 mm
Large table dimensions	800 x 800 x 450 mm
Small table dimensions	600 x 600 x 420 mm
Tabletop thickness	12 mm
Metal frame tube section	20 x 20 mm
Metal frame wall thickness	1.2 mm
Frame understructure height clearance	400 mm
Nesting overlap depth	600 mm
Height difference between tables	30 mm
Floor clearance under frame base	10 mm
Tabletop edge profile	1 mm chamfered eased edge
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Total set net weight	30 kg
Large table static distributed load capacity	100 kg
Tabletop surface abrasion resistance	4000 cycles
Powder coat finish scratch resistance	2H pencil hardness
Tabletop water absorption rate	0.02%
Frame rust resistance rating	48 hours neutral salt spray
Recommended maximum supported weight per table for regular use	50 kg
Wobble deflection under full rated load	2 mm
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Large table tabletop	12mm matte light gray sintered stone, polished non-porous surface
Small table tabletop	12mm matte light gray sintered stone, matching finish to large table
Structural frame	Matte black powder-coated mild steel square tubing, fully welded joints
Frame surface finish	Epoxy-polyester hybrid powder coating, 60 micron dry film thickness
Frame weld joints	TIG welded corner joints, ground smooth before coating
Floor contact pads	4mm thick non-marking TPE rubber pads on each frame corner
Tabletop bonding	Structural neutral silicone adhesive securing stone top to metal frame
Frame internal cross bracing	Single horizontal steel cross bar per table at lower frame rail
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Nesting operation	Small table slides bi-directionally under large table without tilting, no mechanical locks required
Surface use case compatibility	Waterproof non-porous top supports hot drink ware up to 180°C without discoloration
Cleaning access	Open frame design allows full floor access under both tables for vacuuming and mopping
Layout flexibility	Tables can be separated for use as independent side tables or arranged in stepped staggered configuration
Mobility for reconfiguration	Each table can be lifted and repositioned by two adults with no disassembly required
Load distribution	Welded frame distributes weight evenly across four corner support points
Scratch protection	Rubber floor pads prevent frame contact with hard flooring and low-pile rugs when moving units
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Primary residential use case	Modern minimalist, industrial or Scandinavian style living rooms placed in front of sofas
Small space layout suitability	Apartments and compact open-plan living areas where flexible space saving furniture is required
Commercial space use case	Office reception areas, lounge waiting zones or studio break rooms
Functional surface use	Holding beverages, decor items, reading materials or laptop for casual seated use
Recommended complementary furniture	Low-profile fabric or leather sofas with 450 mm seat height, low-pile area rugs
Surface maintenance suitability	High-traffic living areas where easy-to-clean, stain-resistant surfaces are required

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

Furniture stability test	EN 12521:2015
Surface resistance to cold liquids	EN 12720:2013

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

Tabletop material safety	GB 6566Class A
Metal furniture structural safety	GB/T 3324

Standardized tender description text

This product must meet the following technical requirements:
1. Tabletop material safety: GB 6566Class A;
2. Metal furniture structural safety: GB/T 3324;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · NCT-GY8060-MBK

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · NCT-GY8060-MBK

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · NCT-GY8060-MBKOpen Export Tool

Quick Actions

Post an RFQ

Product Description

The model NCT-GY806-MBK nesting coffee table set comprises two unbranded fixed-height tables aligned with minimalist and industrial design aesthetics. The set features matte light gray sintered stone tabletops with a subtle stone texture, paired with open matte black steel frames defined by clean, uncluttered lines. When fully nested, the two tables form a compact, unified square footprint; the smaller table slides smoothly bi-directionally beneath the larger unit without tilting or requiring mechanical locks, creating a neat layered silhouette. Users may also separate the tables for independent use as side tables, or arrange them in a stepped, staggered configuration to suit different spatial layouts. Each table uses a 12mm thick sintered stone top secured to its frame with structural neutral silicone adhesive. The frame is constructed from 20 by 20 mm mild steel square tubing with 1.2 mm wall thickness, featuring fully TIG-welded corner joints ground smooth before finishing, plus a single horizontal steel cross brace at the lower rail of each unit for stable weight distribution across four corner support points. The frame is finished with epoxy-polyester hybrid powder coating applied to a 60 micron dry film thickness, and 4mm non-marking TPE rubber pads are fitted to every frame corner. The non-porous, polished sintered stone surface resists water absorption and withstands hot drinkware up to 180°C without discoloration, supporting regular use loads of 50kg per table, with the larger table rated for 100kg of static distributed weight. The open frame structure provides unobstructed floor access under both tables, enabling straightforward vacuuming and mopping with no hidden gaps to trap debris. Two adults can lift and reposition each table without disassembly, and the rubber pads prevent scuffing to hard flooring and low-pile rugs during movement. This set is well suited for modern minimalist, industrial, or Scandinavian residential living rooms positioned in front of sofas, as well as compact apartments and open-plan living areas where space-saving flexible furniture is a priority. It also functions effectively in commercial settings including office reception areas, lounge waiting zones, and studio break rooms, offering durable surfaces for holding beverages, decor, reading materials, or laptops for casual seated use. It pairs cohesively with low-profile fabric or leather sofas with a 450mm seat height and low-pile area rugs, and its easy-to-clean, stain-resistant surface is ideal for high-traffic living areas. Procurement teams should note the set ships across two cartons, requires 40 minutes of assembly per set, and represents a total packaged gross weight of 90kg for delivery planning.

Set of 2 Minimalist Nesting Coffee Tables with Matte Gray Stone-Textured Top and Black Open Metal Frame Specifications

Suppliers and stock