| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall set footprint (nested) | 860 x 860 x 460 mm | |
|---|---|---|
| Larger table diameter | 860 mm | |
| Larger table height | 460 mm | |
| Larger table top thickness | 12 mm | |
| Smaller table diameter | 510 mm | |
| Smaller table height | 410 mm | |
| Smaller table top thickness | 12 mm | |
| Frame vertical leg cross-section | 30 x 30 mm | |
| Frame lower ring diameter (larger table) | 760 mm | |
| Frame lower ring diameter (smaller table) | 450 mm | |
| Metal frame wall thickness | 1.2 mm | |
| Floor clearance under larger table | 430 mm | |
| Top edge trim width | 15 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall |
Net weight / load capacity / users / durability
| Larger table distributed static load capacity | 50 kg | |
|---|---|---|
| Frame static load rating | 80 kg | |
| Set total net weight | 26 kg | |
| Top surface scratch resistance | 3000 abrasion cycles | |
| Top surface stain resistance | Household liquid repellent | |
| Frame finish scratch resistance | 1000 abrasion cycles | |
| Recommended maximum number of users for adjacent seating | 4 | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Larger table top | 12mm polished white sintered stone, gold metal edge trim | |
|---|---|---|
| Smaller table top | 12mm polished black sintered stone, thin brass inlay line across surface | |
| Frame vertical legs | Brushed gold finished carbon steel, 30x30mm square section | |
| Frame lower support ring | Brushed gold finished carbon steel, continuous circular welded construction | |
| Top metal edge trim | Stamped gold plated stainless steel, 15mm width | |
| Small table surface inlay | Solid brass decorative strip, flush-set into black top surface | |
| Frame weld joints | Full penetration welded steel joints, ground smooth for finish | |
| Floor contact pads | Non-slip PE plastic foot pads, attached to bottom of ring base | |
| Frame surface finish | High-temperature baked gold paint, brushed texture | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel |
Adjustment / rotation / tilt / mobility / storage features
| Nesting storage function | Smaller table slides partially under larger table to reduce footprint | |
|---|---|---|
| Surface use function | Flat polished tops support drinks, reading materials, and decorative items | |
| Independent use function | Both tables can be separated and used as standalone side or accent tables | |
| Floor protection function | Underside foot pads prevent scratches to hard flooring and rugs | |
| Cleaning function | Non-porous smooth top surfaces wipe clean with a damp cloth | |
| Assembly requirement | Frame attaches to top with included hardware, no special tools needed | |
| Weight distribution | Circular ring base spreads load evenly to prevent tipping on soft rugs | |
| Color coordination | Two-tone black/white tops match neutral and luxury living room decor schemes | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Primary living room placement | Positioned in front of 3-seat sofas for serving drinks and decor | |
|---|---|---|
| Small apartment use | Nested configuration saves floor space in compact living areas | |
| Open concept lounge use | Separated tables provide extra surface space for gatherings | |
| Model home/staging use | Luxury two-tone gold finish fits contemporary upscale interior schemes | |
| Balcony/sunroom use | Compact size fits small lounge seating areas in covered outdoor spaces | |
| Home office lounge use | Placed beside lounge seating in office break areas for refreshments | |
| Recommended pairing | Matches upholstered velvet or linen sofas with gold metal accent furniture |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Strength, durability and safety requirements for domestic tables | |
|---|---|---|
| EN 15187:2006 | Assessment of surface resistance to dry heat for furniture surfaces | |
| EN 1022:2018 | Stability testing for domestic seating and tables |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to top panel performance | |
|---|---|---|
| GB/T 4893.4-2013 | Surface wear resistance test for furniture surfaces, applicable to top finish | |
| GB/T 1732-2020 | Impact resistance test for paint films, applicable to metal frame finish | |
| GB 18584-2001 | Limit of harmful substances for wooden furniture, applicable for indoor air safety |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to top panel performance; 2. GB/T 4893.4-2013: Surface wear resistance test for furniture surfaces, applicable to top finish; 3. GB/T 1732-2020: Impact resistance test for paint films, applicable to metal frame finish; 4. GB 18584-2001: Limit of harmful substances for wooden furniture, applicable for indoor air safety; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
