| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1450 x 800 x 450 mm | |
|---|---|---|
| Glass top thickness | 10 mm | |
| Metal tube wall thickness | 1.5 mm | |
| Frame leg section size | 30 x 30 mm | |
| Lower underframe ground clearance | 20 mm | |
| X-brace end support angle from table edge | 45 degrees | |
| Glass top overhang beyond frame | 10 mm | |
| Lower frame perimeter width | 1380 mm | |
| Lower frame perimeter depth | 730 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Net product weight | 30 kg | |
|---|---|---|
| Distributed static top load capacity | 100 kg | |
| Recommended maximum single point load | 30 kg | |
| Floor contact point count | 4 | |
| Frame static lateral load resistance | 50 kg | |
| Expected service life under residential use | 5 years | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop | 10 mm thick tempered smoked black glass with smooth reflective surface | |
|---|---|---|
| Frame structure | Matte black powder-coated square steel tubular construction | |
| End supports | Angled X-shaped steel tube braces welded to vertical leg sections | |
| Lower perimeter frame | Continuous steel tube connecting all four leg assemblies for rigidity | |
| Glass mounting hardware | EPDM rubber gaskets and M6 steel mounting screws | |
| Surface finish on metal | Textured matte black powder coat, 60 micron thickness | |
| Glass edge treatment | Flat polished smooth edge with rounded corners | |
| Frame weld joints | Ground smooth welded joints with matching powder coat touch-up | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Surface use | Flat level top for holding drinks, decor, reading materials and small items in lounge settings | |
|---|---|---|
| Floor protection | Fixed plastic glide pads at each frame corner to prevent floor scratching | |
| Base stability | Rigid X-brace end supports prevent lateral frame racking during regular use | |
| Cleaning access | Open frame design with no lower shelf allows full floor access under the table for cleaning | |
| Assembly type | Knocked-down flat-pack assembly with bolted frame joints for shipping | |
| Glass safety property | Tempered glass breaks into small blunt granules to reduce injury risk if damaged | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential living rooms | Placed centrally in front of sofas for shared use during casual seating and gatherings | |
|---|---|---|
| Office reception lounges | Used in guest waiting areas paired with upholstered seating to hold refreshments and reading materials | |
| Studio apartment open plan spaces | Compact open-frame design maintains visual lightness in small seating zones | |
| Modern industrial themed interiors | Matte black metal and smoked glass aesthetic complements minimalist and industrial decor schemes |
EU Market Access Requirements* EN Standards
| Domestic furniture glass safety | EN 12150 | |
|---|---|---|
| Furniture strength and stability | EN 12521 |
Standards applicable to China-market projects
| Tempered glass safety requirement | GB 15763.2 | |
|---|---|---|
| Metal furniture coating durability | GB/T 3325 | |
| Furniture structural stability test | GB/T 10357.1 |
This product must meet the following technical requirements: 1. Tempered glass safety requirement: GB 15763.2; 2. Metal furniture coating durability: GB/T 3325; 3. Furniture structural stability test: GB/T 10357.1; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
