| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall set footprint when nested | 900 x 800 x 450 mm | |
|---|---|---|
| Large coffee table top diameter | 800 mm | |
| Large coffee table total height | 450 mm | |
| Large table cylindrical base diameter | 700 mm | |
| Large table top thickness | 12 mm | |
| Large table base height | 438 mm | |
| Small side table top diameter | 600 mm | |
| Small side table total height | 550 mm | |
| Small table central leg diameter | 120 mm | |
| Small table top thickness | 12 mm | |
| Floor clearance under small table | 538 mm | |
| Minimum nesting gap between tables | 50 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Total set net weight | 25 kg | |
|---|---|---|
| Large table distributed static load capacity | 100 kg | |
| Surface impact resistance | ≥2 J | |
| Surface abrasion resistance | ≥4000 cycles | |
| Structure stability tilt resistance | 15° | |
| Recommended maximum number of users | 4 adults | |
| Product warranty period | 10 years | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Large table top | 12mm thick sintered stone with polished white marble-vein finish | |
|---|---|---|
| Large table base | 1.2mm thick carbon steel with matte black powder coating | |
| Small table top | 12mm thick sintered stone with matching polished white marble-vein finish | |
| Small table central leg | 1.5mm thick carbon steel with matte black powder coating | |
| Table top edge treatment | Rounded polished edge with 2mm radius | |
| Base bottom pads | 5mm thick non-slip PE floor protection pads | |
| Fastener hardware | M8 zinc-plated steel assembly bolts | |
| Surface finish coating | Matte black epoxy powder coat with 60μm thickness | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Nesting storage function | Small table slides fully under the large table to reduce footprint to 0.72㎡ | |
|---|---|---|
| Height configuration | Fixed non-adjustable height for both tables, large table at lounge seating height | |
| Surface use function | Waterproof, stain-resistant sealed surface supports beverage service and decor display | |
| Multi-scene use flexibility | Small table can be pulled out for extra serving space or used as a standalone side table | |
| Assembly requirement | Knock-down assembly required, attaching tops to bases with included hardware | |
| Floor protection | Non-slip base pads prevent scratches to hard flooring and reduce sliding noise | |
| Edge safety design | Rounded table edges eliminate sharp corners to reduce impact injury risk | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Living room main coffee table | Sized for placement in front of 3seat sofas for beverage and decor service | |
|---|---|---|
| Small apartment space saving | Nesting design reduces required floor space when not in use for compact homes | |
| Hotel lounge area furnishing | Matches modern minimalist decor schemes for hotel guest room lounge seating areas | |
| Office reception area use | Suitable for placement in reception seating areas for guest beverage service | |
| Bedroom accent side table use | Small table can be deployed as a standalone bedside or dressing table side table | |
| Open-plan lounge configuration | Pull-out small table provides extra surface space for casual gatherings and game nights |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture – Strength, durability and safety for domestic tables | |
|---|---|---|
| EN 15372:2008 | Furniture – Durability of furniture surfaces for residential use |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to overall structural safety | |
|---|---|---|
| GB/T 4893.4-2013 | Surface adhesion and wear resistance test for furniture finishes | |
| GB 18584-2001 | Limit of harmful substances for interior decoration wood furniture |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to overall structural safety; 2. GB/T 4893.4-2013: Surface adhesion and wear resistance test for furniture finishes; 3. GB 18584-2001: Limit of harmful substances for interior decoration wood furniture; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
