| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1300 x 700 x 450 mm | |
|---|---|---|
| Tabletop thickness | 12 mm | |
| Corner radius of tabletop | 30 mm | |
| Metal leg tube wall thickness | 1.5 mm | |
| Under-table floor clearance | 100 mm | |
| Horizontal crossbar height from floor | 80 mm | |
| Central vertical support slat width | 40 mm | |
| End U-support outward projection | 80 mm | |
| Tabletop overhang past frame | 30 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Net weight | 40 kg | |
|---|---|---|
| Distributed static top load capacity | 150 kg | |
| Top surface heat resistance | 180 °C | |
| Top surface abrasion resistance | 4 grade | |
| Frame joint static load rating | 100 kg per leg | |
| Recommended maximum placed item weight | 50 kg | |
| Finish scratch resistance (top) | 6H pencil hardness | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop | 12mm polished white sintered stone, softly rounded corners | |
|---|---|---|
| End support frames | 1.5mm thick carbon steel, outward-curving U-shape, matte black powder coat | |
| Central vertical slats | Carbon steel flat bar, matte black powder-coated finish, welded to crossbars | |
| Lower connecting crossbars | Rectangular carbon steel tubing, matte black powder coat, welded assembly | |
| Frame surface finish | Matte black electrostatic powder coating, rust-preventive primer undercoat | |
| Tabletop backing panel | 12mm thick high-density fiberboard support layer | |
| Connection hardware | Zinc-plated steel bolts and lock washers for KD leg attachment | |
| Floor contact pads | 5mm thick non-slip PE plastic pads on each leg base | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Fixed height design | 450 mm low profile optimized for seating area use, no height adjustment | |
|---|---|---|
| Open base access | 100 mm floor clearance allows standard robot vacuum passage under the table | |
| Flat serving surface | Continuous smooth rectangular top supports drinkware, decor and reading materials | |
| Knock-down assembly | Frame attaches to tabletop with included hardware, no on-site welding required | |
| Rigid welded frame structure | Welded joints on metal base eliminate wobble under normal daily use | |
| Heat and stain resistant top | Polished sintered stone surface resists hot drink rings and common household stains | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Small apartment lounge areas | Compact footprint fits urban studio and small living space layouts | |
|---|---|---|
| Modern light luxury interior schemes | Black and white minimalist palette matches contemporary and minimalist decor styles | |
| Lounge reception waiting areas | Suitable for office reception or lounge spaces for light guest refreshment service | |
| Recommended surface use | Hold decorative vases, tea sets, books, remote controls and small serving trays |
EU Market Access Requirements* EN Standards
| EN 15372:2016 | Requirements for domestic non-upholstered furniture including coffee tables for strength and stability | |
|---|---|---|
| EN 12520:2015 | Mechanical safety requirements for domestic tables to prevent injury during use | |
| EN 10130:2006 | Specification for cold rolled carbon steel used in furniture frame construction |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for top backing panel quality | |
|---|---|---|
| GB/T 4893.4-2013 | Surface wear resistance test for furniture surfaces, applicable for top finishAcceptance | |
| GB/T 1732-2020 | Impact resistance test for paint films, applicable for metal frame powder coat |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for top backing panel quality; 2. GB/T 4893.4-2013: Surface wear resistance test for furniture surfaces, applicable for top finishAcceptance; 3. GB/T 1732-2020: Impact resistance test for paint films, applicable for metal frame powder coat; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
