| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall set footprint (fully extended) | 1650 x 1200 x 630 mm | |
|---|---|---|
| Large drum table dimensions | 900 mm diameter x 460 mm height | |
| Large table tabletop thickness | 30 mm | |
| Large drum base wall thickness | 25 mm | |
| Medium brass pedestal table dimensions | 650 mm diameter x 550 mm height | |
| Tall brass pedestal table dimensions | 500 mm diameter x 630 mm height | |
| Brass pedestal base diameter (floor contact) | 350 mm | |
| Brass pedestal metal wall thickness | 1.5 mm | |
| Floor clearance under brass pedestal tables | 10 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Total set net weight | 50 kg | |
|---|---|---|
| Large drum table static distributed load capacity | 100 kg | |
| Surface abrasion resistance (tabletop finish) | Class 2, 2000 abrasion cycles | |
| Brass finish corrosion resistance (salt spray) | 48 hours | |
| Recommended number of users for lounge use | 6 | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years; finish 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Large drum table top | 18mm MDF substrate with black faux marble veneer, white linear veining, sealed matte finish | |
|---|---|---|
| Large drum base body | MDF cylindrical core wrapped in matching black marble-patterned laminate | |
| Large drum base edge trim | 10mm wide brushed brass metal band along bottom perimeter | |
| Pedestal table tops | 1mm thick brushed brass plated steel disc, dished concave profile | |
| Pedestal base frames | 1.5mm thick cold-rolled steel hourglass form, brushed brass PVD finish | |
| Floor protection pads | 5mm thick non-marking felt pads applied to all base bottoms | |
| Structural connectors | M8 steel bolts connecting tabletops to pedestal bases, thread-locking treatment | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
Adjustment / rotation / tilt / mobility / storage features
| Nesting flexibility | Two brass tables can tuck partially over/around large drum table to reduce footprint | |
|---|---|---|
| Freestanding support | No wall mounting required, all three tables rest independently on level floors | |
| Surface function | Smooth sealed tabletops support drinkware, decor, books and lounge accessories | |
| Anti-tip stability | Wide weighted base designs prevent tipping under normal residential lounge use | |
| Cleaning compatibility | Non-porous sealed surfaces support wiping with mild household cleaning agents | |
| Assembly requirement | Minimal assembly only for attaching tabletops to pedestal bases, no permanent installation | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Primary placement | Contemporary residential living rooms, positioned in front of sofas for lounge service | |
|---|---|---|
| Secondary use cases | Upscale hotel lobbies, reception lounge areas, luxury open-plan apartment spaces | |
| Space saving suitability | Small urban apartments where flexible, multi-height surfaces reduce required floor space | |
| Style compatibility | Modern glam, minimalist, art deco, and contemporary luxury interior design schemes | |
| Companion furniture recommendation | Pair with low-profile fabric or leather sofas in neutral, black or tan tones |
EU Market Access Requirements* EN Standards
| Domestic table safety recommendation | EN 12521:2015 | |
|---|---|---|
| Surface chemical resistance recommendation | EN 12720:2009+A1:2013 |
Standards applicable to China-market projects
| Tabletop surface durability recommendation | GB/T 4893.4 | |
|---|---|---|
| Structural stability recommendation | GB/T 10357.1 | |
| Metal base corrosion recommendation | GB/T 1993 |
This product must meet the following technical requirements: 1. Tabletop surface durability recommendation: GB/T 4893.4; 2. Structural stability recommendation: GB/T 10357.1; 3. Metal base corrosion recommendation: GB/T 1993; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
