Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	900 × 800 × 450 mm
Overall nested footprint (side by side)	900 x 800 x 450 mm
Large white tabletop diameter	800 mm
Small dark tabletop diameter	600 mm
Tabletop thickness	20 mm
Table height (both tables)	450 mm
Metal frame tube diameter	30 mm
Frame wall thickness	1.5 mm
Under-table floor clearance	100 mm
Frame base ring diameter (large table)	700 mm
Frame base ring diameter (small table)	520 mm
Table edge radius	10 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Set total net weight	28 kg
Static distributed load per tabletop	73 kg
Surface scratch resistance rating	3000 abrasion cycles
Surface heat resistance	180 °C
Frame static load capacity	150 kg
Recommended maximum users for simultaneous use	4
Frame rust protection durability	5 years indoor use
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Large tabletop	White marble-vein sintered stone, polished smooth finish
Small tabletop	Dark matte black sintered stone, low-sheen textured finish
Support frames	Matte black powder-coated carbon steel, C-shaped open ring base
Frame joints	TIG welded steel connections, ground smooth at seams
Tabletop backing	12mm high-density MDF reinforcement layer
Tabletop to frame connectors	M6 zinc-plated steel screws with rubber washers
Frame surface treatment	Electrostatic powder coat, 60μm thickness, anti-rust phosphate pre-treatment
Foot pads	5mm thick non-slip PVC pads at frame base contact points
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Nesting storage function	Small table slides fully under large table to reduce footprint to 0.5㎡
Flexible layout function	Tables can be separated for extra serving surface, or arranged in staggered formation
Surface maintenance function	Non-porous sintered stone surface resists stains, wipes clean with damp cloth
Knock-down assembly function	Frames attach to tabletops with included hex key and hardware, no special tools required
Anti-slip function	PVC foot pads grip hard flooring and carpet, prevent unwanted movement during use
Edge safety function	Fully rounded table edges eliminate sharp corners to reduce impact injury
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Small apartment living room	Suitable for 90㎡ compact living spaces, nests to save floor space when not in use
Open-plan lounge area	Pairs with 4seater sofas for serving drinks, magazines and decorative display
Modern minimalist interior schemes	Matches monochrome, light luxury, Scandinavian and industrial decor styles
Home office reception area	Functions as a guest refreshment table in casual meeting or reception zones
Rental property furnishing	Durable, easy-clean finish and flexible layout suit short-term and long-term rental fit-outs
Studio apartment multi-use space	Can be repositioned for use as a temporary laptop table or light dining surface

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 12521:2015	Furniture – Strength, durability and safety for domestic tables, applicable to structural load requirements
EN 15187:2006	Furniture – Assessment of surface resistance to cold liquids, applicable to tabletop stain resistance
EN 1022:2018	Furniture – Seating stability, referenced for adjacent use with domestic living room seating

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to tabletop backing and structural performance
GB/T 4893.1-2021	Surface wear resistance test method for furniture surfaces, applicable to tabletop finish durability
GB/T 17657-2013	Test methods for wood-based panels, applicable to MDF backing mechanical performance

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to tabletop backing and structural performance;
2. GB/T 4893.1-2021: Surface wear resistance test method for furniture surfaces, applicable to tabletop finish durability;
3. GB/T 17657-2013: Test methods for wood-based panels, applicable to MDF backing mechanical performance;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · NCT-RND2-BLKFW-8060

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · NCT-RND2-BLKFW-8060

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · NCT-RND2-BLKFW-8060Open Export Tool

Quick Actions

Post an RFQ

Product Description

This 2-piece nested round coffee table set features a cohesive modern minimalist aesthetic anchored by contrasting tabletops and sleek black metal framing. The set includes two circular tables of matching height, with a larger white marble-vein polished sintered stone top and a smaller dark matte black sintered stone top with a low-sheen textured finish. Both pieces are supported by open C-shaped matte black carbon steel frames, whose streamlined open ring base creates a light, uncluttered visual profile. The tables can be arranged side by side, staggered for layered visual interest, pulled apart to create additional serving space, or nested completely with the smaller table sliding fully under the larger unit to minimize occupied floor space when not in active use.
Each tabletop is constructed from durable sintered stone, reinforced with a high-density MDF backing layer for structural stability, and finished with fully rounded edges to eliminate sharp corners and reduce impact injury risk. Frames are built from carbon steel tubing joined with smooth-ground TIG welded connections, finished with an electrostatic powder coat applied over anti-rust phosphate pre-treatment for long-term indoor rust resistance. Non-slip PVC pads fitted at the base of each frame protect flooring surfaces and prevent unwanted movement during use, while rubber washers on the zinc-plated steel connecting hardware reduce loosening over time.
The non-porous sintered stone surfaces resist staining and wipe clean easily with a damp cloth, supporting straightforward regular maintenance. The set supports up to four simultaneous users, and each table offers stable static load capacity for serving drinks, displaying decor, holding reading materials, or serving as a temporary work or light dining surface. An integrated cable management feature accommodates power and data cords as needed for connected spaces.
This set suits a wide range of residential and light commercial spaces, including compact apartment living rooms, open-plan lounge areas paired with standard seating, home office reception zones, studio multi-use spaces, and both short-term and long-term rental properties. It complements monochrome, light luxury, Scandinavian, and industrial interior design schemes.
Procurement teams and buyers should note the set ships in two cartons, requires assembly with the included hex key and hardware with no special tools needed, and should be matched to space plans that can accommodate the set’s full side-by-side footprint when in use. The durable, easy-care finish and flexible layout make it a practical choice for high-traffic casual spaces where adaptability and low maintenance are key priorities.

2-Piece Nested Round Coffee Table Set, White Marble-Look and Dark Sintered Stone Tops with Black Metal C-Frames Specifications

Suppliers and stock