| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions (W x D x H) | 1300 x 700 x 550 mm | |
|---|---|---|
| Tabletop thickness | 12 mm | |
| Frame vertical bar width | 25 mm | |
| Lower storage shelf height from floor | 100 mm | |
| Kettle cutout recessed dimensions | 370 x 250 mm | |
| Tea tray dimensions | 650 x 400 mm | |
| Vertical bar spacing on long sides | 120 mm | |
| Frame tube wall thickness | 1.2 mm | |
| Clear legroom height under tabletop front edge | 528 mm | |
| Lower shelf usable depth | 640 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Net weight | 42 kg | |
|---|---|---|
| Tabletop static load capacity | 150 kg | |
| Suitable number of users | 4 | |
| Tabletop impact resistance | 6 mm steel ball drop 300 mm no crack | |
| Tabletop surface abrasion resistance | Grade 4, 6000 abrasion cycles | |
| Frame weld static joint strength | 1000 N per joint | |
| Net product weight | 42 kg | |
| Standard seating capacity for tea service | 4 users | |
| Frame welded joint static strength | 1000 N per joint | |
| Adjustable foot uneven floor compensation | 10 mm |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop slab | 12mm dark grey matte sintered stone, polished matte finish, anti-scratch and heat-resistant to 180°C | |
|---|---|---|
| Support frame | 1.2mm thick carbon steel square tube, matte black electrostatic powder coating, welded construction | |
| Cross bracing | 20mm diameter round carbon steel tube with matching black powder coat, X-brace under lower shelf for torsional rigidity | |
| Lower storage shelf panel | 0.8mm thick textured black powder-coated steel sheet, supported by frame perimeter | |
| Recessed tea tray | 8mm thick clear tempered glass, textured drainage surface with integrated drain outlet | |
| Kettle cutout reinforcement | 1.5mm thick galvanized steel support plate under tabletop cutout, supports electric tea boiler weight | |
| Frame foot pads | 5mm thick non-slip PVC adjustable feet, 20mm diameter, compensates for 5mm floor unevenness | |
| Under-table cross bracing | 20mm diameter round carbon steel tube with matching black powder coat, curved X-brace under lower shelf for torsional rigidity | |
| Lower storage shelf support | 0.8mm thick textured black powder-coated steel sheet, perimeter welded to frame rails | |
| Drainage fitting | 12mm diameter food-grade PVC drain hose, routed inside frame cavity to connect tray outlet to waste bin | |
| Assembly fasteners | M8 zinc-plated steel hex bolts with lock washers, 16 total fasteners for frame and tabletop mounting | |
| Cutout edge trim | 2mm thick black silicone edge seal around kettle cutout, prevents water seepage under tabletop |
Adjustment / rotation / tilt / mobility / storage features
| Integrated tea brewing station | Recessed tabletop cutout accommodates standard fully automatic electric tea boiler with water pump, positioned for left-side operation | |
|---|---|---|
| Built-in tea drainage system | Tempered glass tea tray connects to hidden drain hose routed through frame to waste bin placed on lower shelf | |
| Bulk water storage | Open lower shelf accommodates standard 18.9L bottled water for the integrated tea pump, with 320mm clearance for bottle placement | |
| Waste bin storage | Lower shelf provides dedicated space for 10L tea waste bucket positioned directly under drain outlet | |
| Fixed height work surface | 550mm table height optimized for seated use on standard sofas or lounge chairs for casual tea drinking | |
| Heat-resistant work surface | Sintered stone top supports direct placement of hot teapots and boiling kettles up to 180°C without surface damage | |
| Anti-scratch tabletop surface | Matte sintered stone finish resists scratches from teacups, tea trays and daily use objects without visible wear over standard use | |
| Open side access | Vertical slatted frame design provides unobstructed leg access from all four sides for seated users | |
| Leveling adjustment | Threaded PVC feet at each frame leg adjust 10mm total height to compensate for uneven hard floors, eliminating table wobble | |
| Open access design | Vertical slatted frame provides unobstructed leg access from all four sides for seated users, no solid panels blocking knee space | |
| Cable routing clearance | Open frame design allows power cord for electric tea boiler to be routed down frame legs to floor outlets without visible cord clutter | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg |
Verified carton / gross weight / assembly / loading data
| Number of shipping cartons | 1 | |
|---|---|---|
| Shipping carton dimensions | 1380 x 780 x 130 mm | |
| Gross shipping weight | 48 kg | |
| Shipping volume per unit | 0.14 CBM | |
| Required assembly time | 35 minutes | |
| 20ft GP container loading quantity | 190 units | |
| 40ft HQ container loading quantity | 490 units | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm |
Recommended spaces / users / usage modes
| Living room lounge tea area | Suitable for placement in front of 3-seat sofas in residential living rooms for casual tea service and daily use | |
|---|---|---|
| Office reception lounge | Suitable for corporate reception areas and executive lounge spaces for serving tea to visiting guests | |
| Tea house and casual cafe seating | Suitable for small private booths in tea houses or boutique cafes for dedicated tea service | |
| Balcony leisure space | Suitable for enclosed balcony or sunroom casual seating areas for small group tea gatherings | |
| Recommended matching seating | Pairs with standard height lounge chairs, sofas with 450 mm seat height for comfortable seated use | |
| Residential living room tea area | Suitable for placement in front of 3-seat sofas in residential living rooms for daily casual tea service and snack placement | |
| Corporate office reception lounge | Suitable for executive lounge and guest reception areas for serving tea to visiting clients | |
| Tea house private booth seating | Suitable for small private rooms in tea houses or boutique cafes for dedicated kung fu tea service |
EU Market Access Requirements* EN Standards
| Table mechanical safety | EN 15372:2016 Furniture - Strength, durability and safety - Requirements for non-domestic tables, applicable for light commercial office lounge use | |
|---|---|---|
| Surface material fire performance | EN 13501:2018 Fire classification of construction products and building elements, applicable for tabletop reaction to fire classification | |
| Table mechanical safety and durability | EN 15372:2016 Furniture - Strength, durability and safety - Requirements for non-domestic tables, applicable for light commercial office lounge use | |
| Surface reaction to fire | EN 13501:2018 Fire classification of construction products and building elements, applicable for tabletop fire performance classification | |
| Formaldehyde and VOC emissions | EN 16516:2017 Construction products - Assessment of release of dangerous substances - Determination of emissions into indoor air, applicable for coating and adhesive VOC limits |
Standards applicable to China-market projects
| Table structural stability | GB/T 3324General technical requirements for wooden furniture, applicable for structural stability and safety acceptance inspection for fixed tables | |
|---|---|---|
| Sintered stone surface safety | GB 6566Radionuclide limits for building materials, applicable for decorative stone surface radiological safety testing | |
| Powder coating environmental compliance | GB 18584Indoor decorating and refurbishing materials - Limit of harmful substances of wood furniture, applicable for coating heavy metal and VOC limits | |
| Stone surface radiological safety | GB 6566Radionuclide limits for building materials, applicable for sintered stone surface radiological safety testing | |
| Coating environmental compliance | GB 18584Indoor decorating and refurbishing materials - Limit of harmful substances for furniture, applicable for powder coating heavy metal and VOC content limits | |
| Tempered glass safety | GB 15763.2Safety glazing materials in building - Part 2: Tempered glass, applicable for tempered glass tea tray impact and breakage safety |
This product must meet the following technical requirements: 1. Table structural stability: GB/T 3324General technical requirements for wooden furniture, applicable for structural stability and safety acceptance inspection for fixed tables; 2. Sintered stone surface safety: GB 6566Radionuclide limits for building materials, applicable for decorative stone surface radiological safety testing; 3. Powder coating environmental compliance: GB 18584Indoor decorating and refurbishing materials - Limit of harmful substances of wood furniture, applicable for coating heavy metal and VOC limits; 4. Stone surface radiological safety: GB 6566Radionuclide limits for building materials, applicable for sintered stone surface radiological safety testing; 5. Coating environmental compliance: GB 18584Indoor decorating and refurbishing materials - Limit of harmful substances for furniture, applicable for powder coating heavy metal and VOC content limits; 6. Tempered glass safety: GB 15763.2Safety glazing materials in building - Part 2: Tempered glass, applicable for tempered glass tea tray impact and breakage safety; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
