Product supplierModern Square White Marble-Veined Side Table with Open Black Metal Cube Frame, High-density MDF core
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 500 × 500 × 600 mm | |
|---|---|---|
| tabletop thickness | 18 mm | |
| metal frame tube wall thickness | 1.2 mm | |
| frame tube profile width | 25 mm | |
| lower bracing height from floor | 60 mm | |
| open frame vertical clear opening per side | 450 mm | |
| floor contact pad diameter | 20 mm | |
| tabletop overhang beyond frame | 10 mm | |
| base footprint | 480 x 480 mm | |
| corner radius of tabletop | 2 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| net product weight | 8 kg | |
|---|---|---|
| static tabletop load capacity | 30 kg | |
| frame static load rating | 80 kg | |
| tabletop surface abrasion resistance | 2000 cycles | |
| wobble deflection under 20kg center load | 2 mm | |
| surface water resistance rating | IPX2 | |
| applicable placement count per standard 20ft container | 850 units | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| tabletop substrate | High-density MDF core | |
|---|---|---|
| tabletop finish | White grey-veined matte marble-look laminate | |
| frame material | Cold-rolled steel square tube | |
| frame finish | Matte black electrostatic powder coating | |
| assembly hardware | Zinc-plated steel allen bolts and lock washers | |
| floor contact pads | Non-marking TPE rubber pads | |
| tabletop edge treatment | Sealed eased edge to prevent moisture ingress | |
| frame joint construction | Mitered corner welds covered with touch-up paint | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| assembly requirement | Knock-down flat-pack assembly with included allen key | |
|---|---|---|
| surface function | Flat stable surface for drinks, lamps, decor or small personal items | |
| floor protection | Bottom rubber pads prevent scratching hard flooring and reduce slip | |
| open frame design | No lower shelf or enclosure for unobstructed lightweight visual profile | |
| cleaning compatibility | Smooth sealed surfaces support wipe-clean with mild household cleaners | |
| placement adaptability | Symmetrical square form works next to sofas, beds, or as corner accent stands | |
| hardware adjustment | Visible frame bolt holes allow re-tightening to eliminate wobble after assembly | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| residential living room | Position next to sofas or armchairs to hold drinks, remote controls and table lamps | |
|---|---|---|
| residential bedroom | Use as bedside table for alarm clocks, phones and small nighttime essentials | |
| commercial lounge space | Deploy in office breakouts, hotel lobbies or waiting areas for guest beverage placement | |
| small accent display use | Hold potted plants, framed photos or decorative objects in entryways or hallways | |
| temporary work surface extension | Place adjacent to work desks to hold peripherals, notebooks or small office supplies |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| surface scratch resistance | EN 15185:2011 Level 3 | |
|---|---|---|
| furniture mechanical safety | EN 12521:2015 |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| tabletop formaldehyde emission | GB/T 18580E1 grade | |
|---|---|---|
| metal frame coating adhesion | GB/T 9286Grade 1 | |
| furniture stability | GB/T 10357.2 |
Standardized tender description text
This product must meet the following technical requirements: 1. tabletop formaldehyde emission: GB/T 18580E1 grade; 2. metal frame coating adhesion: GB/T 9286Grade 1; 3. furniture stability: GB/T 10357.2; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool