Product supplierNested Round Pedestal Accent Side Table Set of 2, Molded high-density composite, high-gloss cream lacquer finish
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 800 × 800 × 627 mm | |
|---|---|---|
| Overall set footprint (nested) | 800 x 800 x 627 mm | |
| Cream unit tabletop diameter | 800 mm | |
| Cream unit total height | 450 mm | |
| Black unit tabletop diameter | 600 mm | |
| Black unit total height | 627 mm | |
| Raised tabletop lip height | 20 mm | |
| Tabletop material thickness at lip | 19 mm | |
| Black pedestal base floor contact diameter | 380 mm | |
| Cream pedestal base floor contact diameter | 450 mm | |
| Pedestal neck diameter (under tabletop) | 180 mm | |
| Nested clearance between units when tucked | 100 mm | |
| Floor-to-tabletop underside height (cream unit) | 30 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Per-table static load capacity | 20 kg | |
|---|---|---|
| Per-unit net weight (cream model) | 8 kg | |
| Finish stain resistance rating | 4 (coffee ring resistant) | |
| Finish scratch resistance (pencil hardness) | 2H | |
| Base static stability tilt threshold | 15 degrees | |
| Warranty period for structural defects | 1 year | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Cream unit body and base | Molded high-density composite, high-gloss cream lacquer finish | |
|---|---|---|
| Black unit body and base | Molded high-density composite, matte black powder-coated finish | |
| Tabletop surface | Sealed non-porous hard surface, smooth rounded edges | |
| Raised perimeter lip | Integrally molded same material as tabletop, seamless construction | |
| Pedestal base interior | Hollow weighted core for improved stability | |
| Floor contact base bottom | Smooth polished base edge, optional non-slip felt pad pre-installation | |
| Surface coating thickness | 0.15 mm lacquer/powder coat | |
| Seam construction | One-piece monolithic construction with no visible hardware or joints | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Nested space-saving configuration | Black tucks partially under cream unit to reduce footprint by 35% when not in use | |
|---|---|---|
| Raised lip containment | 20mm perimeter lip prevents small items, cups and decor from sliding off tabletop | |
| Independent dual-use placement | Units can be separated for use as individual end tables beside separate seating pieces | |
| Surface cleaning compatibility | Wipe-clean non-porous surface supports use of mild household cleaning agents | |
| Zero-assembly delivery option | Fully constructed monolithic units require no on-site hardware assembly | |
| Floor protection compatibility | Flat base bottom accepts adhesive felt pads to prevent scratching hard flooring | |
| Weight distribution design | Flared outward pedestal base concentrates low weight to reduce tipping risk | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Living room sofa-side placement | Position beside sofas or armchairs to hold drinks, books and small decor items | |
|---|---|---|
| Small apartment flexible layout | Nested configuration saves floor space for compact urban living spaces | |
| Bedroom nightstand alternative | Use individually as sculptural bedside tables for modern minimalist bedrooms | |
| Lounge accent furniture pairing | Match with neutral-toned modern seating for curated reception or lounge areas | |
| Balcony casual side surface | Sealed finish supports light outdoor covered balcony use for drink placement |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture – Strength, durability and safety for domestic tables | |
|---|---|---|
| EN 16121:2013 | Storage and non-domestic furniture – Safety requirements, structural performance reference |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for structural safety verification | |
|---|---|---|
| GB 18584-2001 | Limit of harmful substances in wooden furniture interior decoration materials | |
| GB/T 4893.4-2013 | Surface furniture finish adhesion and wear resistance test method |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for structural safety verification; 2. GB 18584-2001: Limit of harmful substances in wooden furniture interior decoration materials; 3. GB/T 4893.4-2013: Surface furniture finish adhesion and wear resistance test method; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool