| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall set footprint (nested) | 800 x 600 x 510 mm | |
|---|---|---|
| Large table diameter | 800 mm | |
| Large table total height | 510 mm | |
| Large tabletop thickness | 18 mm | |
| Small table diameter | 600 mm | |
| Small table total height | 450 mm | |
| Base wire rod diameter | 8 mm | |
| Circular base ring diameter (large table) | 600 mm | |
| Circular base ring diameter (small table) | 450 mm | |
| Undertop clearance (large table) | 492 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Total set net weight | 18 kg | |
|---|---|---|
| Large table distributed static load capacity | 100 kg | |
| Tabletop scratch resistance | 2000 abrasion cycles | |
| Frame rust resistance | 48 hours salt spray | |
| Recommended maximum user weight for tabletop seating | 0 kg | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years; finish 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Large tabletop | 18mm thick MDF core with matte white melamine finish | |
|---|---|---|
| Small tabletop | 18mm thick MDF core with matte white melamine finish | |
| Frame support rods | 8mm diameter solid cold-rolled steel | |
| Base ring foot | 10mm diameter bent steel tubing with welded joints | |
| Frame finish | Matte black electrostatic powder coating | |
| Floor protectors | 5mm thick adhesive felt pads on base ring bottom | |
| Assembly hardware | Zinc-plated steel bolts and Allen key | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
Adjustment / rotation / tilt / mobility / storage features
| Space-saving nesting design | Small table slides fully under large table to reduce footprint by 40% when not in use | |
|---|---|---|
| Knock-down assembly | Tables assemble with included Allen key in 20 minutes with 2 people | |
| Leveling stability | Fixed rigid frame with felt pads sits evenly on low-pile carpet and hard flooring | |
| Surface use suitability | Tabletops support hot drink cups, small decor, books, and light snack trays | |
| Configuration flexibility | Tables can be arranged separately as side tables, staggered as a set, or fully nested | |
| Edge safety | Smooth rounded tabletop edges with no sharp corners | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential living room | Placed in front of sofas for holding drinks, decor, reading materials, and snacks | |
|---|---|---|
| Small apartment and studio spaces | Nesting function saves floor space when additional surface area is not required | |
| Office reception and lounge areas | Used in casual waiting areas to hold magazines, beverages, and reception decor | |
| Balcony casual seating areas | Paired with outdoor accent seating for light refreshment use in covered balconies | |
| Recommended complementary decor | Pairs with light neutral upholstered sofas, low-pile area rugs, and minimal decorative accents |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture – Strength, durability and safety requirements for domestic tables | |
|---|---|---|
| EN 1022:2019 | Domestic furniture – Seating and tables – Determination of stability | |
| EN 13722:2004 | Furniture – Test methods for surface finishes of furniture |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to tabletop structural performance | |
|---|---|---|
| GB/T 17657-2013 | Test methods for evaluating surface wear, stain resistance of wood-based panels | |
| GB 18584-2001 | Limit of formaldehyde emission from wood-based furniture, applicable to MDF core materials |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to tabletop structural performance; 2. GB/T 17657-2013: Test methods for evaluating surface wear, stain resistance of wood-based panels; 3. GB 18584-2001: Limit of formaldehyde emission from wood-based furniture, applicable to MDF core materials; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
