Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	800 × 800 × 450 mm
Large tabletop thickness	12 mm
Small tabletop thickness	12 mm
Large pedestal base diameter (floor contact)	550 mm
Small pedestal base diameter (floor contact)	450 mm
Pedestal base diameter (tabletop connection)	220 mm
Nested combined footprint (minimal)	820 x 820 x 450 mm
Tabletop edge radius	3 mm
Floor clearance under large table edge	438 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Total set weight	45 kg
Large table distributed static load capacity	100 kg
Surface scratch resistance (abrasion rating)	6 Mohs
Surface heat resistance	180 °C
Pedestal base static stability load	150 kg
Finish durability (paint coating)	Grade 1
Recommended maximum users for casual use	4 persons
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Large tabletop	12mm matte white sintered stone, marble-effect veining, polished edge
Small tabletop	12mm matte grey sintered stone, fine linear stone texture
Conical pedestal bases	1.5mm thick carbon steel, matte black powder-coated finish
Tabletop-to-base connector plates	3mm thick galvanized steel, 4-point M8 bolt fixing
Base bottom protective pads	5mm thick non-slip EVA rubber, floor-scratch prevention
Surface finish coating	Matte powder coat, 60μm thickness, anti-corrosion treatment
Tabletop underside reinforcement	10mm thick MDF backer board, bonded to sintered stone
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support
Reference Finish / Color Count	Recommended 6top finishes and 3frame colors

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Nesting adjustment	Manual tuck of small table partially under large table, no tools required
Surface functionality	Non-porous sintered stone top resists staining from spilled drinks and food
Structural stability	Single center conical pedestal creates unobstructed legroom around full table perimeter
Fixed height design	Non-adjustable fixed 450mm height aligned with standard sofa seat heights
Assembly requirement	Simple 4-bolt attachment of base to each tabletop with included hex key
Mobility	Fixed position design without casters, stable non-slip base contact with floor
Dual-table flexible use	Small table can be pulled out for use as an independent side/end table next to seating
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Primary placement	Positioned directly in front of standard living room sofas
Applicable space sizes	Small to medium apartments, open-plan living areas, lounge spaces
Use case suitability	Holding beverage sets, decorative displays, snacks, reading materials
Style matching	Modern minimalist, light luxury, Italian contemporary interior schemes
Seating compatibility	Suitable for 4seat sectional or standard sofas, lounge seating groups
Secondary use case	Small table used as standalone side table next to armchairs

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

Household furniture safety general	EN 12521:2015
Furniture surface emission standard	EN 13722:2004
Furniture mechanical test for tables	EN 1730:2000

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

Table furniture safety standard	GB/T 3324
Furniture surface paint safety	GB 18584
Furniture mechanical stability	GB/T 10357.1

Standardized tender description text

This product must meet the following technical requirements:
1. Table furniture safety standard: GB/T 3324;
2. Furniture surface paint safety: GB 18584;
3. Furniture mechanical stability: GB/T 10357.1;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · NCT-RD-8060-BLK-WG

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · NCT-RD-8060-BLK-WG

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · NCT-RD-8060-BLK-WGOpen Export Tool

Quick Actions

Post an RFQ

Product Description

This 2-Piece Round Nesting Coffee Table Set with Matte Black Conical Pedestal Bases (model NCT-RD-8060-BLK-WG) delivers a refined modern minimalist silhouette aligned with contemporary residential interior preferences. Each table stands at a fixed 450 mm height, matched to standard sofa seat heights, with single center-positioned conical pedestal bases that leave full, unobstructed legroom around every table perimeter. The set features two circular tabletops: the larger 800 mm diameter table carries a matte white sintered stone surface with subtle marble-effect veining and a polished edge, while the smaller 600 mm diameter table has a matte grey sintered stone top with a fine linear stone texture. Both tabletops are 12 mm thick, reinforced on the underside with bonded 10 mm MDF backer boards for structural rigidity, and paired with matte black conical carbon steel pedestal bases. The 1.5 mm thick steel bases receive a 60μm matte powder-coat finish with anti-corrosion treatment, graded 1 for coating durability, and connect to tabletops via 3 mm thick galvanized steel plates secured with four M8 bolts per unit. 5 mm thick non-slip EVA rubber pads line each base bottom to prevent floor scuffing, with floor contact diameters of 550 mm for the large table and 450 mm for the small table. The non-porous sintered stone surfaces offer 6 Mohs scratch resistance, 180 °C heat tolerance, and stain resistance against common food and beverage spills, making the set well suited for holding drink sets, decorative displays, snacks, and reading materials for up to four casual users. The large table supports 100 kg of distributed static load, while each pedestal base is rated for 150 kg of static stability load. Users may manually tuck the small table partially under the large table without tools to achieve a minimal combined footprint of 820 x 820 mm, or pull the small table out fully to serve as an independent side or end table next to armchairs or seating groups. Assembly requires attaching each base to its tabletop with the included hex key, a process taking 40 minutes per set; the tables have a fixed position design without casters for steady, non-slip floor contact. The set is ideally placed directly in front of four-seat sectionals or standard sofas in small to medium apartments, open-plan living areas, and lounge spaces, complementing modern minimalist, light luxury, and Italian contemporary decor schemes. Procurement teams should note each set ships in two cartons with a total packaged gross weight of 90 kg and 0.55 m³ packaging volume, with no casters included for mobile reconfiguration, and non-adjustable fixed height that aligns only with standard sofa seat elevations.

2-Piece Round Nesting Coffee Table Set with Matte Black Conical Pedestal Bases Specifications

Suppliers and stock