| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 500 x 410 x 500 mm | |
|---|---|---|
| Top panel thickness | 25 mm | |
| Plinth base height | 30 mm | |
| Per drawer front height | 205 mm | |
| Corner radius | 20 mm | |
| Recessed handle groove depth | 15 mm | |
| Per drawer internal usable width | 440 mm | |
| Per drawer internal usable depth | 360 mm | |
| Per drawer internal usable height | 175 mm | |
| Base floor clearance | 5 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Top panel static load capacity | 25 kg | |
|---|---|---|
| Drawer glide cycle rating | 50000 open/close cycles | |
| Finish abrasion resistance | 2000 rub cycles | |
| Product net weight | 25 kg | |
| Recommended color option count | 6 | |
| Standard residential warranty | 1 year | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Core cabinet body | 18mm thick E1-grade engineered wood (MDF/particleboard) | |
|---|---|---|
| Top surface and edge trim | Light oak wood veneer over engineered wood core | |
| Drawer front panels | 15mm thick engineered wood with matte off-white polyurethane paint | |
| Drawer box sides/bottom | 12mm thick plywood or solid pine wood | |
| Drawer glides | Cold-rolled steel side-mounted ball-bearing glides with stop latches | |
| Plinth base core | 18mm thick engineered wood with matching oak trim and light grey bottom pad | |
| Recessed handle groove | Integrally routed into drawer divider, no protruding metal hardware | |
| Surface edge treatment | Smooth rounded polyurethane edge banding matching panel finish | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Drawer operation | Two equal-height stacked drawers pull out horizontally with integrated recessed pulls | |
|---|---|---|
| Drawer extension | Full-extension glides allow 100% drawer access to rear storage area | |
| Collision protection | 20mm rounded vertical edges on all exposed corners reduce impact injury risk | |
| Floor protection | Low-friction non-marking felt pad on plinth base prevents floor scratching | |
| Storage function | Dual enclosed drawers conceal personal items, dust and clutter out of sight | |
| Surface utility | Flat level top surface supports table lamps, phones, books and decor items | |
| Stability design | Wide flush plinth base distributes weight evenly to eliminate tipping risk | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Bedroom bedside placement | Position next to standard height beds for overnight storage of phones, books and lamps | |
|---|---|---|
| Living room side table use | Place next to sofas or lounge chairs for remotes, coasters and small decor | |
| Small apartment storage | Suitable for compact studio units where multi-use low storage is required | |
| Hotel guest room furnishing | Match with modern hotel beds for consistent minimalist guest room design | |
| Children’s bedroom use | Soft rounded corners eliminate sharp edge risks for child-safe spaces | |
| Matching interior style | Coordinate with light oak, cream and white modern minimalist or Japandi interiors |
EU Market Access Requirements* EN Standards
| Formaldehyde emission classification | EN 13986:2004+A1:2015 E1 | |
|---|---|---|
| Furniture safety for domestic use | EN 12521:2015 | |
| Surface abrasion resistance | EN 15185:2011 |
Standards applicable to China-market projects
| Formaldehyde emission limit | GB/T 39600E1 grade | |
|---|---|---|
| Surface coating safety | GB 18581 | |
| Hardware durability | GB/T 10357.5 |
This product must meet the following technical requirements: 1. Formaldehyde emission limit: GB/T 39600E1 grade; 2. Surface coating safety: GB 18581; 3. Hardware durability: GB/T 10357.5; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
