| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Finished Top Thickness | 45 mm | |
|---|---|---|
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Total set net weight | 35 kg | |
|---|---|---|
| Static load per tabletop | 45 kg | |
| Tabletop surface abrasion resistance | Grade 4 (≥6000 revolutions) | |
| Tabletop heat resistance | 180°C | |
| Frame paint scratch resistance | Level 1 (no visible scratch at 500g load) | |
| Recommended maximum users served | 4 people | |
| Surface water/stain resistance | Non-porous, stain-proof, wipe-clean | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Large tabletop | 12mm black veined sintered stone, polished surface | |
|---|---|---|
| Small tabletop | 12mm white calacatta-veined sintered stone, polished surface | |
| Tabletop edge trim | Gold-coated steel trim wrapping top perimeter | |
| Support rods | 12mm diameter carbon steel tubular rods, matte gold baked paint finish | |
| Floor base rings | 20mm diameter hollow carbon steel circular ring, textured ribbed edge | |
| Frame coating | High-temperature baked matte gold paint, low VOC | |
| Connection hardware | Zinc-plated steel screw fittings, anti-loosening design | |
| Floor contact points | Non-slip rubber pads on base ring bottom | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Nesting function | Small table slides fully under large table to reduce occupied floor space by 40% | |
|---|---|---|
| Dual table use | Two separate surfaces can be arranged side-by-side for expanded serving space | |
| Surface use suitability | Supports placement of drinks, books, decor, and vases without surface damage | |
| Mobility | Lightweight individual tables can be repositioned easily without casters | |
| Floor protection | Integrated rubber pads prevent scuffing on hard floors and area rugs | |
| Assembly requirement | Knock-down assembly required, connects tops to frames with included hardware | |
| Storage access | Fully open base design with no lower shelves or enclosed compartments | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Primary placement | Living room area directly in front of sectional or standard sofas | |
|---|---|---|
| Suitable interior styles | Modern luxury, minimalist, contemporary, glam, scandinavian interiors | |
| Space size suitability | Small to medium apartments, open-plan living areas, studio units | |
| Use cases | Holding drinks, coffee table books, decorative objects, vases, and remote controls | |
| Matching furniture pairing | Pairs with gold-accented side tables, light/gray fabric sofas, low-pile area rugs | |
| Commercial use suitability | Hotel lounge areas, apartment model homes, boutique office waiting zones |
EU Market Access Requirements* EN Standards
| Furniture surface durability | EN 15187:2006 Assessment of surface resistance to dry heat | |
|---|---|---|
| Furniture stability testing | EN 1730:2012 Test methods for tables, determination of stability |
Standards applicable to China-market projects
| Tabletop material safety | GB 6566Class A radionuclide limit for building decoration materials | |
|---|---|---|
| Metal furniture structural safety | GB/T 3324General technical requirements for metal furniture | |
| Surface coating safety | GB 18584Indoor decorating and refurbishing materials limit of harmful substances |
This product must meet the following technical requirements: 1. Tabletop material safety: GB 6566Class A radionuclide limit for building decoration materials; 2. Metal furniture structural safety: GB/T 3324General technical requirements for metal furniture; 3. Surface coating safety: GB 18584Indoor decorating and refurbishing materials limit of harmful substances; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
