| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall set footprint (nested configuration) | 900 x 900 mm | |
|---|---|---|
| Large tabletop diameter | 900 mm | |
| Large table total height | 450 mm | |
| Small tabletop diameter | 600 mm | |
| Small table total height | 400 mm | |
| Tabletop thickness | 18 mm | |
| Base wall thickness | 2 mm | |
| Arched base cutout clearance height | 100 mm | |
| Floor contact pad diameter | 30 mm | |
| Table edge chamfer | 3 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Total set net weight | 20 kg | |
|---|---|---|
| Distributed static load per tabletop | 50 kg | |
| Recommended maximum number of users served | 4 | |
| Surface impact resistance | 12 J | |
| Powder coat finish abrasion resistance | 2000 Taber cycles | |
| Floor protection load capacity per pad | 25 kg | |
| Wobble tolerance on level carpeted surface | 0.5 mm | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop substrate | 18mm high-density fiberboard | |
|---|---|---|
| Tabletop surface layer | White marble-veined thermally fused laminate | |
| Tabletop edge banding | 1mm PVC edge seal | |
| Base structure | 2mm cold-rolled steel | |
| Base finish | Matte gunmetal powder coating | |
| Floor contact pads | Non-marking EVA rubber | |
| Assembly hardware | Zinc-plated steel bolts and Allen key | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
Adjustment / rotation / tilt / mobility / storage features
| Nesting functionality | Small table slides 300mm under large table via arched base cutout | |
|---|---|---|
| Independent use capability | Each table functions as a standalone coffee/side table | |
| Surface maintenance | Non-porous sealed tabletop allows wipe-clean with damp cloth | |
| Floor protection | Integrated non-slip pads prevent scratching and sliding | |
| Weight distribution | Three-point base contact ensures stability on uneven carpet | |
| Assembly requirement | Knockdown flat-pack design, tabletop attaches to base with 6 bolts | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Shipping carton dimensions (per carton) | 950 x 650 x 120 mm | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Primary living room placement | Positioned in front of 4seat sectional sofas | |
|---|---|---|
| Small apartment use | Nesting configuration reduces footprint to 0.81sqm when not in expanded use | |
| Reception lounge use | Separated table placement supports guest seating areas for light refreshments | |
| Open-plan flexible space use | Lightweight movable bases allow quick reconfiguration for gatherings | |
| Recommended complementary furniture | Paired with light-toned upholstered sofas and low-pile neutral rugs | |
| Use restriction note | Not intended for heavy weight loads or outdoor use |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture – Strength, durability and safety for domestic tables, recommended for performanceAcceptancereference | |
|---|---|---|
| EN 1022:2018 | Domestic furniture – Seating and tables – Determination of stability, applicable to anti-tip performance check |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to tabletop substrate performanceAcceptancereference | |
|---|---|---|
| GB/T 4893.8-2013 | Furniture surface test for abrasion resistance, applicable to laminate tabletop finish validation | |
| GB/T 1730-2007 | Paint film hardness test, applicable to metal base powder coat durability check |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to tabletop substrate performanceAcceptancereference; 2. GB/T 4893.8-2013: Furniture surface test for abrasion resistance, applicable to laminate tabletop finish validation; 3. GB/T 1730-2007: Paint film hardness test, applicable to metal base powder coat durability check; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
